The router password has been changed, but the internet speed is getting stuck at 10

If you are sure that it is 4m, then there are three possibilities, 1 Telecom or other companies have not helped you open 4m or your line does not reach 4m, call for consultation (there is a contact number when installing).

2. Computer problems, turn on the 360 traffic monitor, turn off the movie-related software, it will generally be much faster. Only open a computer to ping the same **, see which time is bigger, which computer is a virus.

In my opinion, generally you are the majority of the second point.

Routing to see if there is a view of the real-time traffic,It is estimated that there is software of the machine that accounts for the bandwidth,Like fast broadcasting、Thunder、pps、Even if you don't use software such as pplive,There are cases of stealing uploads when hanging empty,It is best to install 360 uniformly,So that you can check the traffic of the machine at any time,If you don't use the traffic for tens of k,It means that there is software in automatic upload or**。

I myself have experienced it! Or maybe the telco is monitoring that your network is carrying too many people. Deliberately limit your internet speed (just guess what)...

However, my telecom only needs to detect that you have too many computers connected to the Internet. It will be sealed directly.

Two questions to look into.

First, is there a problem with the speed limit you made?

In addition, if this broadband is not your own, then someone else has the opportunity to do something through the telecommunications department, but it is unlikely.

5 computers card card, very normal.

Summary. When you change the broadband password, you need to log in to the wifi settings page (router settings page), and then under the Internet settings or WAN port settings option, fill in the modified broadband password, and save it, the detailed setting steps are as follows.

When you change the broadband password, you need to log in to the wifi settings page (router settings page), and then fill in the modified broadband password under the WAN port settings option in the Internet or WAN port settings, and save it, the detailed setting steps are as follows.

After changing the broadband password, if you do not update the broadband password in the router settings page, your wifi router will not be able to access the Internet. 1. First of all, please check your router login address on the nameplate at the bottom of the router to bury the source (management address.

Be sure to check the login address information on the nameplate at the bottom of your router, because the login address is different for different routers.

I was able to surf the Internet, just wanted to ask if if it would affect the speed of the Internet if I didn't change the settings of the router.

No, it won't. If the call is blind to the Internet is normal, the mobile phone Internet is slow, it is also possible that your wifi password is too simple, someone rubs the network, it is recommended that the wifi set a number of complex passwords, such as pinyin and Bikong and punctuation marks, I hope to help you.

How do I log in to the router settings page? I'm TP-Lin

There is a ** written on the back of the router.

Enter the IP address and the source code is admin, and after the ruler enters, find the setup wizard Internet access mode as pppoe Next, enter the broadband account and password point to confirm to reset the router.

Theoretically, changing the wifi password is not directly related to the network speed, it may be a feeling, it may be the ** or app server failure you visit, it may be the observation time period is different, it may be the environment, or it may be caused by the ISP network failure at that time.

Try to fix it.

1. Restart the router, the home router works continuously, the data exchange accumulates over time, causing network congestion, and the router can release the cache and eliminate redundant data after power failure.

2. Connect the computer with a network cable and test the network speed on the computer, such as using 360 speed testing software, or there is a ** speed testing site to determine whether it is a router problem. If the test is fine, the reason is a wifi issue.

3. Discard the router, connect the output network cable from the optical modem directly to the computer, test the ISP line with PPPOE broadband connection, and test it with 360 test software.

4. Check the wifi signal, if the wifi signal is weak, you can try to test it closer to the router, generally about 3 meters.

5. Try to replace another network device, such as a mobile phone, ipad, or laptop, and distinguish whether it is caused by the quality of the wireless module of the network access device.

6. Now 360 has a routing guard software, which can easily view the equipment in the access network, install it to determine whether someone is rubbing the network, and carry out large-traffic network activities.

7. If the computer is wirelessly connected to the network, there is also a computer system that can be updated in the background, which occupies system resources and network traffic, which is manifested in the slow operation of the computer in use, and the opening of web pages is like a slow cow, but it has nothing to do with wifi.

8. Try to change the test time, such as weekends and holidays, 6 p.m. to 9 p.m. is the peak period of the network, the network speed will be slow, avoid these time periods for testing.

WiFi principle.

The root cause of wifi network speed is that the wireless router transmits wireless signals and transmits the network bandwidth to the network equipment with a wireless receiving module through the protocol, and the signal strength directly affects the network speed.

Factors influencing wifi.

1. Working channel, at present, the wifi module generally works in dual-band mode, and 5G, the channel is relatively few, and it is a common channel, many electronic devices in life work in this frequency band, such as microwave ovens, Bluetooth devices, refrigerators, neighbors' wifi signals, etc., which will cause channel conflicts.

2. Since wifi is transmitted through wireless signals, the weather environment will also affect its transmission speed, and the wireless quality is better in sunny weather than cloudy and rainy weather and humid air.

3. The location of the router is quite critical, with an open area, no obstacles, long signal propagation distance and high intensity. In the home, the signal loss through a wall is 50%, and in the case of reinforced floor slabs, concrete walls, the loss is even greater.

When the wifi speed slows down, don't worry, calm down, read this article, I believe you can solve the problem, increase your common sense, and improve yourself.

After changing your Wi-Fi password, it actually has nothing to do with your internet speed, and the internet speed slows down, so you can restart it and try again.

I have also encountered this situation, setting the password network speed to slow down, canceling the password network speed to restore normal, and trying many methods, including reset, changing the channel, changing the encryption type.

Later, I messed around and turned off the wmm function.,It's actually good.,You can try.,The specific method is "Wireless Settings ==" Wireless Advanced Settings == > Cancel the "Turn on WMM" checkmark",I don't understand the specific principle.,Anyway, it's a problem to solve.,If you encounter this kind of problem in the future,You can try.。

1: The bandwidth size of broadband access is too small, and there are many people who use it, and the speed will definitely be slow.

2: Whether the router has been set with bandwidth such as IP bandwidth control, the set bandwidth is too small, and the network speed is very slow. After removing all the settings on the router, whether the network speed returns to normal.

3: Excessive use of firewallsExcessive use of firewalls can also lead to slow down of the network, for example, some antivirus software suites have their own firewall functions, and the solution is not to uninstall the unnecessary firewall and only keep a powerful one.

You reset it and try it! I don't think it has anything to do with the router.

It is recommended to reset the router and set the dial-up again;

Reset router method;

Method 1: There is a button [RESET] button behind the router, press and hold it for 5 seconds, and then reset it;

Method 2: Go to the router --- System Tools --- reset the router;

Set up router dialing:

Automatic acquisition of computer IP and DNS settings;

1. Enter the router. In the [Setup Wizard], select [PPOE Dialing] (some are ADSL Dialing), enter your Internet username and password as prompted, and save;

2. In [Network Parameters] --WAN Settings], select [Normal Mode], and select [PPOE Dialing] in the three options of [Connection]. The next is to select [Auto Connect], Save, and Exit;

3. If you want to use wireless wifi, your router must have a wireless routing function, in the settings, turn on the wireless routing function, here, the wireless signal signal is changed to one of them. The strongest anti-interference.

You can also set a password for your Wi-Fi connection.

Hello. After the router changes the wifi password. You may not have clicked the save button.

So the wifi password set is not valid. You can reset it. Open your phone's browser.

Enter the ** of the router in the input box, or these Arabic numerals on the back of the router.

After entering, the interface of the router will appear. On this interface, enter the broadband account number and broadband login password. Once the input is complete, the interface will automatically jump to a new page.

Enter your new wifi password on the new page. Then click on the Save button. Now the wifi password is in effect.

After entering the wifi password on your mobile phone and laptop, you can surf the Internet normally.

If the router is not properly set, we recommend that you perform the following operations:

1. Connect the line between the network cable, the router and the computer, and start the computer and the router equipment;

2. After starting the device, open the browser and enter it in the address bar to enter the wireless router settings interface.

3. An account and password to log in to the router appear in the settings interface, enter the default account and password admin

4. Set up step by step according to the setup wizard, choose the Internet mode, usually ADSL users choose the first PPPoE, if you use other network service providers, select the following two according to the actual situation, if you don't know how to choose, directly select the first item to automatically select, convenient for novice operations, click next after selection;

5. Enter the account and password applied for from the network service provider, and go directly to the next step after the input is completed;

6. Set the wifi password, try to make the alphanumeric combination more complicated and not easy to be rubbed into the network.

7. After entering correctly, it will prompt whether to restart the router, select Yes to confirm the restart of the router, and you can surf the Internet normally after restarting the router.

Enter or, one of them can log in to the router in the address bar, then find the security settings, and change the password of the router (note that it is not a change of login password).

You first confirm the four aspects of the problem, one, whether your home wireless signal is normal, is strong or weak, and whether the password is secure two, if the wired network is normal, wireless Internet access is slow, you can also see whether the wireless network card performance is relatively poor (the desktop is equipped with another wireless network card will have this situation), three, check whether there is someone rubbing the network, you can install 360, with the 360 traffic firewall that in the anti-rubbing network function. Fourth, check the system settings, run the system repair function in 360 Security Guard and the Internet abnormality repair function in the computer clinic, and try it.

Then put a can on its head, and the signal is ten times stronger.

No, it could be your internet problem

Is it too simple to change and be rubbed into the net.

It doesn't matter how fast or slow the internet connection is or whether you change your password, it may be that your password has been cracked.

You can go to [MAC Address Filtering] inside;

Then click [Turn on MAC filter clicks];

Then click [Add New Entry];

Then enter your own MAC and IP into it;

Finally, click Save.

the size of the bandwidth of broadband access;

2.Whether the bandwidth has been set on the router;

3.whether the computer in the LAN is poisoned (e.g. worms);

If your computer is poisoned in your local area network, you can install anti-virus software on your computer and upgrade it to the latest version to fully disinfect your computer. At the same time, computers should also be upgraded in a timely manner, install system patches, and uninstall unnecessary services and close unnecessary ports to improve the security and reliability of the system.

4.Slow down network speed due to network cable issues;

When a stand-alone machine dials up the Internet, does not pass through the router, whether the network speed is normal. If the Internet access is still very slow when you connect the Internet on a single machine, it may be a problem with the line.

5.Insufficient system resources (e.g., high CPU usage);

You may have loaded too many applications running in the background, please load the software reasonably or delete useless programs and files to free up resources to achieve the purpose of improving the Internet speed. For example, the CPU is very busy, which will directly affect the network and computer speed.

How do you see CPU usage? You can use the shortcut Ctrl+Alt+del

6.problems with the network itself;

The server you want to connect to is on a server that is running low on bandwidth or is overloaded. The solution is very simple, please change the time period and then go up or change the goal**.

7.The system has been used for too long;

If the internet speed slows down suddenly after a long time of booting up, you might as well restart it to see if it solves the problem. After being turned on for a long time, especially when the weather is hot, the laptop does not dissipate heat well, the CPU temperature is too high, and the overall performance of the system decreases.

8.excessive use of firewalls;

Excessive use of firewalls can also lead to slow down network speeds, for example, some antivirus software suites have their own firewall functions, and the solution is not to uninstall the unnecessary firewall and only keep a powerful one.