The Chinese comparison table of DOS and BOIS is as titled Thank you

Hello DOS is mainly a disk-oriented system software, to put it simply, DOS is a bridge between man and machine, is a layer of "shell" covered in the machine hardware, with DOS, we don't have to understand the hardware structure of the machine, nor do we have to memorize those boring machine commands with rote, just through some DOS commands close to natural language, we can easily complete most of the daily operations. In addition, DOS can also effectively manage various software and hardware resources, schedule them reasonably, and all software and hardware are under the monitoring and management of DOS, and carry out their work in an orderly manner.

The BIOS is a set of programs solidified into a ROM chip on the motherboard of the computer, which stores the most important basic input and output programs of the computer, the self-test program after boot and the system auto-start program, and it can read and write the specific information of the system settings from the CMOS. Its main function is to provide the lowest-level, most straightforward hardware setup and control for the computer.

BIOS is just a subfamily of DOS. The software language and the development and application of the software are based on DOS.

Operating environment: win9x me nt 2000 xp 2003 registration name: People's Republic of China Registration code: 2898-5448-5603-bb2d

The content of the BIOS of each model of motherboard is different, and there is no way.

However, there are some that are generic, you can find a book, or search on the Internet, there are many of them.

DOS is an operating system, before Windows 95. It is the mainstream operating system of computers.

Self-diagnostics: Identify hardware configurations by reading the content in CMOS RAM, and self-test and initialize them;

CMOS Setup Program: During the boot process, start with a special hotkey, and after setting, store it in CMOS RAM;

System bootstrap loader: After the self-test is successful, load the bootloader on the disk relative to the 0 channel 0 sector into the memory, and let it run to load the DOS system;

Drivers and outages for primary IO devices;

Command :copy

Copy one or more files to another location.

Arguments: copy [ d ] [ v ] [ n ] [ y | /-y] [/z] [/a | /b ] source [/a | /b]

source [/a | /b] [destination [/a | /b]]

source specifies the files to be copied.

a represents an ASCII text file.

b denotes a binary file.

d Allows decryption of the target file to be created, the destination specifies the directory and or file name for the new file.

v Verify that the new file is written correctly.

n When copying files with non-8dot3 names, use short file names whenever possible.

y Do not use prompts to confirm that you want to overwrite an existing object.

y Use the prompt to confirm that you want to overwrite an existing object.

z Replicate networked files in restartable mode.

The command line switch y can be pre-set in the copycmd environment variable.

This may be replaced by -y on the command line. Unless the copy command is executed in a batch file script, the default should be to prompt when overwritten.

To attach files, specify one file for the target and several files for the source (in wildcard or file1+file2+file3 format).

copy c: 1234 d: xyz where c: 1234 is the file to be copied and d: xyz is the file to be copied to the directory.

Press del or f1 or f2 or f3 or ......... when powered onF12, one of the 13 keys can go into the BIOS. Remember to press wildly when you turn it on, otherwise it will pass in a flash, and you won't be able to get in.

DOS cannot be entered into the BIOS.

DOS is at the system level and BIOS is at the hardware level.

To enter the BIOS, simply press the delete key when the computer is turned on.

There are a few things that can be done, such as if you transfer a file to the other person... Then compare the file that was not transferred to the file when it was transferred in. You can know the other party's IP. netstat -a -b