iPadair 1 suddenly can t be charged, and it still doesn t work after unplugging the charger Solve!

Either the circuit IC is rotten, or the motherboard is rotten.

There may be too many programs running in the background, delete.

1. Confirm whether the data cable is normal, the data cable looks normal on the outside, but it may have broken inside;

2. If the battery level is too low, the battery will be protected, which will cause the battery to enter a sleep state, and it needs to be charged for 20-30 minutes to activate the battery before it can continue charging;

3. Press and hold the power button and the home button After the Apple logo appears, release the power button Continue to press and hold the home button until the sign of connecting iTunes appears, then connect the charger to charge, and it will be fine in half an hour;

4. If the battery or equipment hardware fails, go to the after-sales service or specialty store for inspection and maintenance.

The rated current of the charger is large enough.

Method steps.

1iPad has a built-in high-capacity lithium battery, and all the energy consumption for operation is stored in this battery. Lithium batteries are more sensitive to temperature sensing, just like ours, which has great changes in temperature changes. Why is it sensitive?

The temperature is too low, and I won't go to work. The temperature is too high, and you may also lose your temper. iPad temperature zone, iPad should operate in the range of 32°F to 95°F.

In other words, 0°C to 35°C is the right temperature to run and store your iPad. Try to keep your iPad as close to the room temperature as possible (72° F or 22° C), which is ideal.

2Now that you know that the battery is particularly sensitive to temperature, let's talk about why iPad Air won't charge in winter. If you're in a place where the temperature is particularly low, such as below 0 degrees, there's a good chance that you won't be able to charge your iPad Air. Because the outside temperature at this time has exceeded the normal working temperature of the battery, and some electronic chips cannot work normally at low temperatures.

3At this time, we can put the iPad Air in the bed, or use some heating equipment to heat up the iPad. Try to keep your iPad at around 22 degrees, then charge your iPad again and you should do the trick.

4If the ambient temperature in your area is not low, but it still can't be charged, you can ask the computer to charge the iPad and see if it can be charged. If it can be charged, it may be that the charger is broken.

5If it can't be charged on the computer, it may be a problem with the iPad, and it is recommended to send the device for repair to the local Apple after-sales service for testing.

Cause: It may be that the current is not up to standard.

The current is not up to standard or mismatched, so when the iPad is connected to the power supply through the data cable, it will show that it is not charging or that the connection does not respond.

The biggest change to the iPad Air is its overall design, which is more biased towards the iPad mini, making the iPad Air incredibly thin and lightweight.

Thanks to the unibody design of the aluminum, the body is only millimeters thin. Nearly a quarter smaller than the previous generation iPad, weighing less than 500 grams, it's just as incredibly robust.

There's also a stunning Retina display with a resolution of 2048 x 1536 pixels and over 3.1 million pixels, so it's as fine as it can be seen and text is crisp and clear.

It is also equipped with Apple's latest A7 processor + M7 motion coprocessor, which means that everything can be processed with up to 2x faster processor speed and graphics processing speed. In terms of GPU, the A7 integrates the quad-core PowerVR G6430, and the A7 is also the first CPU to integrate this core, which supports OpenGL.

This may be that the weather is too cold, the landlord only needs to use a hair dryer to blow for a while, I add it is also very cold, and the two ipdas are like this every time they blow it. If you don't understand, you can continue to ask me, I hope to help you, it's not easy to play with a claw machine, hope.

Because of the problem of your plug, the iPad needs a lot of current, if you use a 1A plug, it will be like this, just change the plug to 2A.

When the charging current is too low, the iPad will show that it is not charging.

For example, if you use the iPhone charger to charge the iPad, or charge the computer port, it will show that it is not charging.

If you don't mix the charger of the iPhone, it means that there is a problem with the charger, can you borrow an iPad or charger to try?

The voltage is unstable, and the voltage is sometimes high and sometimes low, which will occur.

I found a way to fix the iPad Air showing up (not charging) when charging. However, most people will not like this way of charging, that is, buy a (power bank) power bank to charge. You can try it, hope this method solves your problem, thanks!

It is recommended to use the (power bank) power bank to charge when it is displayed (not charging).

It is estimated that there is a problem with the charging head. In a change of line.

It's the same with my winter, just put it in the quilt to recharge.

Replace the data cable to solve the real problem.

It's okay to change the number of distance wires, and the plug is broken.

The same goes for mine! After-sales said there was a problem with the charger! Maybe the charging port is loose! Alas, I don't know what to do.

The ipad can be turned on when connected to the charger, and it will automatically shut down after pulling out the charger, which means:

1.The battery life is significantly shorter, and the battery is about to be scrapped.

2.The battery is running out of power.

Here's how to fix it:

1.Charge your iPad with the charger for more than 1 hour and repeat the previous operation again. If the problem persists after unplugging the charger, the assumption is valid.

During the warranty period, non-man-made damage can be replaced by a new machine after sale, paid for maintenance for man-made damage, and counterfeit and shoddy products and man-made disassembly can be sold directly (not in accordance with the regulations, unable to go to the after-sales warranty).

2.Charge your iPad with the charger for more than 1 hour and repeat the previous operation again. If the iPad can continue to operate after unplugging the charger, the assumption is true.

You change the data cable and charger to try, if it is still like this, the battery should be broken, you contact the after-sales service to test.

Just wait and open it again, I just came across it today.