What should I do if I paint more than the contour line when drawing on a computer?

Lock the layer to avoid painting it outside.

Computer painting has a very convenient "mask".

The so-called mask is to keep a record of the area to be drawn, so that when you draw it, you don't draw it out of bounds (the selection is a temporary selection of an area, and the mask is a long-term one).

The first step: from the northernmost point of China to the easternmost point of China, mainly for the layout, you can control the height and easternmost of the map of China, and the line also determines the size of the map of China. Of course, no matter which place you draw first, the first stroke determines the size of the entire map of China.

Step 2: Draw the head and beak of the Chinese rooster from north to bottom.

Step 3: Draw "three bends and one mention" from the northwest end to the east, which can basically control the width of the map between the east and west, the easternmost point, the chicken mouth, and the northwest Altai are almost in a horizontal line, and the easternmost point - the chicken mouth and the chicken mouth - the northwest Altai is about 1:2 in length.

Step 4: Follow the Ussuri River to the south "two bends".

Step 5: From the northwest "three bends and one flat" to the westernmost part.

Step 6: China's coastline from north to south to complete one stroke, which should be noted that Liaodong Bay, Bohai Bay, Yellow River Delta, Shandong Peninsula, Haizhou Bay line should be practiced often, the Yangtze River Estuary and Hangzhou Bay, Pearl River Estuary, Leizhou Peninsula students often stretch their necks to see if you have missed a picture, many teachers often talk about the harbor, open city ......, often only drawing the coastline. Therefore, the line is drawn more skillfully and freely, and there are many rules and methods for drawing, except for the Liaodong Peninsula, the Bohai Sea and the Shandong Peninsula, which are roughly drawn according to the semi-circular arc.

Step 7: From the Pamir Plateau to the Yunnan-Tibet Boundary "two bends and one arc", there are not many important cities at the border, and students do not pay much attention to it, so it can be dealt with briefly, but to make the whole map of China tangible, the border near the Karakoram Mountains and the recesses near the Kashmir region will be the key strokes.

Step 8: From the northwest of Yunnan to the coast of Guangxi, it feels more familiar. It should be noted that there are two protrusions in western Yunnan and southern Yunnan, the southern Yunnan protrusion is roughly the same as the Beibu Gulf, and the Yunnan-Guizhou junction is near the Tropic of Cancer to the north.

Step 9: Draw Taiwan and Hainan, Taiwan is like a banana, Hainan is like a pineapple.

Step 1: Draw a rectangle with an aspect ratio of roughly 5:3, and evenly divide the rectangle into 3 rows and 6 columns, and mark the degree of longitude;

Step 3: Draw a "flat-bottomed sink" between 090 and 0120 in the first row, get 5 dots, marked 1-5, where 1 3 on each side; Cut off the two rightmost corners of the second row to get 5 reference points, denoted as 6-10, which are all at 1 3 on each corresponding side; Connect DE and slightly correct it (as shown in the dotted line in the figure) to get points 11 and 12. See Figure 2.

Instructions:1In the step of sketching the outline, students need to draw several times to remember, mainly in the southwest, northeast and Bohai Bay.

2.Later, students will draw the Yellow River, the Yangtze River, and the Pearl River in the map, and mark the main mountainous and topographic units in China, which will lay a good foundation for the comprehensive study of Chinese geography in the future.

3.In order to make it easier to memorize the graticule, this figure uses a square projection in a cylindrical projection.

01 If we use paper to draw, we should prepare tools, and we can also use other tools to draw. First of all, we need to draw a map of China, the overall outline of the land, because there are more curves, everyone should be careful when drawing, in order to have the right proportions, you can refer to the map to draw.

02 After that, draw a map of China's relatively large islands and the extent of the South China Sea.

03 After that, we will draw the dividing line of various provinces and cities in the map of China, it is more difficult to draw here, everyone draw slowly, don't worry.

04 After that, we need to give the map of China, each province, and start coloring. When applying color, you may not be able to apply the details of the contour neatly, but the overall shape must be reasonable.

05Finally, we can paint each province with color, pay attention to ensure that the adjacent provinces are not too close to each other, so that it is easy to use and view06

First this, then this, then this, and finally that. That's it.

Find a map to copy first, and then find out the general shape of the main border, or memorize the latitude and longitude range of the border, mainly because you are interested in the map, it is easy to learn.

You can first take a relatively transparent paper and draw it, tie it until you feel it, and then copy it, and finally draw it out of the map with the impressions in your memory, and finally make corrections and improvements.

Pay attention to the details, but you can start with a rough draft, then observe, and slowly change.

Near real and far virtual, near big and far small. The dividing line between light and dark should be clear and heavy.

Sketch? Gouache? Oil painting? Watercolor???

I recommend that when drawing the outer outline, you should use a pencil to draw all the outlines, then paint them uniformly, and then wipe the pencil drawings when they are dry. It is better to use the same tone of color, warm or cold.

In fact, colored pencil is also called water-soluble pencil! This kind of painting doesn't look as stiff as it doesn't get wet! The silhouette is really my hobby! You don't need to outline a plush toy! If it's a robot's kind of outline that is a little heavier, it's still a good choice!

Sketch according to the color of the object itself.

It is best to use the same color when drawing with colored pencils, so that it looks better.

If the light source is the top light, then the bottom of the nose is the dark part, and draw a dark part of the shape, where the dark part is the deepest. Since the nose is closest to the light source on the face, the tone should not be too heavy, just wipe the gray tone with a paper towel, and use an eraser to highlight the nasal bone in the shape of a nasal bone.

When sketching the original, create a new blank layer, draw the outline line on the new blank layer, and after the sketch, hide or delete the background layer.

It doesn't have to be a line draft. It depends on personal skills and habits and painting style. Draw a line drawing directly within the PS or use a path stroke; Or draw a line on the paper and scan it to PS; Or use vector software to draw line art, such as AI, CDR, etc.

The first step is to draw a painting coating:

After creating a new blank document, or on the interface where you need to insert a flowchart, first select "Insert" in the menu bar "Shape" column, and select "New Painting Painting" at the bottom of the drop-down menu to create a new painting painting. You can also skip this and draw a flowchart directly on the page.

The second step is to draw the flowchart elements:

The cursor hovers over the painted paint, click "Insert" and "Shape" in turn, select the shape you need to draw the flowchart (as shown in the picture) in the drop-down menu, and then draw on the painting paint to adjust the size.

The third step is to draw the process

Now that we've drawn the basic shape, we're going to start adding the arrow symbol, which can be found in the Drawing Tools"Format"Select the desired symbol in the upper left corner of the bar, click the inverted triangle on the right, and all the shapes (as shown in the picture) will pop up, or you can add them by "inserting" and "shapes".

Step 4, Element Alignment:

In order to ensure the beauty of the flowchart, we usually align the elements of the steps at the same level. By "Format" and "Alignment", the drop-down menu of alignment options will pop up (as shown in the figure), and select the alignment you need.

Step 5, Element Color Setting:

We can set some different colors for the elements to make the flowchart look less monotonous. In the menu bar "Format" sub-bar "Shape Format" to adjust, select the element you want to set the color of, and then set it through "Shape Fill" and "Shape Outline".

Step 6: Insert the text box:

When we draw a flowchart, we may need to add some words like "acting on", "reacting on" and so on on the horizontal line to represent the process. This is where we come into use text boxes. Click "Insert" "Text box" "Draw text box", and then insert where you need to add text.

Usually we set the text box to "No Fill Color" and "No Outline", which can be set in "Shape Fill" and "Shape Outline".

Step 7: Add text:

Add text to the drawn flowchart, and the complete flowchart is complete.

end precautions.

The color of the flowchart should be set according to the situation, and it is best not to add color to more formal documents.