Auman 340 lower exhaust injection oil is not overhauled, is there a good way

Pro, hello waste pipe injection oil master to do the following reasons: 1, crankcase ventilation system problems: the easiest way to troubleshoot is to directly pull out the oil dipstick, see if there is oil, from the dipstick of the insertion pipe to spray out, if there is, it means that the PCV valve is damaged.

2. If the exhaust pipe of the car is connected to the upper part, the problem of valve oil seal should be considered: generally speaking, the exhaust pipe drain oil is because of the high pressure of the crankshaft, if it has just been repaired, the organic oil in the cylinder is retained, and the pure yard oil will be discharged in a short time; If there is still oil leakage after long-term operation after maintenance, it may be caused by the wear of the floating bearing seal ring of the pure pressure increaser.

Summary. Hello dear, Auman 490 horsepower engine oil pressure is too low can be caused by a variety of reasons, here are some common reasons and corresponding solutions:1

Oil pump failure: The oil pump is the core component of the engine oil circuit, and if the oil pump fails, it will cause the oil pressure to be too low. The solution is to replace the oil pump.

2.Oil filter blockage: Oil filter blockage can also cause oil pressure to get too low.

The solution is to replace the oil filter. 3.Oil pump lever weared:

Worn oil pump levers can cause the oil pump's output to drop and the oil pressure to decrease. The solution is to replace the oil pump lever. 4.

Too low oil viscosity: If an unsuitable oil is used, too low oil viscosity can also lead to too low oil pressure. The solution is to change the appropriate oil.

What is the reason why the oil pressure of Auman is too low.

Hello dear, Auman 490 horsepower engine oil pressure is too low can be caused by a variety of reasons, here are some common reasons and corresponding solutions:1Oil pump failure:

The oil pump is the core component of the engine oil circuit, and if the oil pump fails, the oil pressure will be too low. The solution is to replace the oil pump. 2.

Oil filter blockage: A blocked oil filter flush can also cause the oil pressure to drop too much. The solution is to replace the oil filter.

3.Oil pump lever wear: Oil pump lever wear will cause the output of the oil pump to decrease, and the oil pressure will also decrease.

The solution is to replace the oil pump lever. 4.Engine Seal Aging:

If an unsuitable oil is used, too low oil viscosity can also lead to too low oil pressure. The solution is to change the appropriate oil.

To sum up, there are many original friends with low engine oil pressure, which need to be carefully inspected and analyzed. It is recommended to send the vehicle to a regular maintenance station for inspection and maintenance to ensure the normal operation of the engine.

What is the biggest question.

How is there no problem with me.

Hello dear, the most likely reason may be the oil circuit blockage imitation round pants: the oil circuit in the engine lubrication system may be blocked due to the deposition of oil, impurities and other substances, resulting in poor oil flow, resulting in a decrease in the pressure of the oil cavity.

If all of the above are detected to be normal, then the problem may be that the oil pump is faulty!