Ask how to use the router is best to say in detail

It depends on what kind of router you are, there is one that logs in to a**, and then goes in to set up the router, and there is also a disc in it when you buy a router. Just follow the router's instructions.

According to investigation, a router refers to a hardware device that connects two or more networks, plays the role of a gateway between networks, and is a dedicated intelligent network device that reads the address in each data packet and then decides how to transmit it.

The general steps are as follows: 1. Make a physical connection; 2. Set up the router; 3. Set up your computer to connect to the network. It's so simple that it couldn't be simpler.

If you really want to talk about use, it's more practical to talk about the use of routers. For example, router tips - multiple computers share the Internet:

1. Some broadband operators only allow one computer to access broadband, so they often forcibly bind the MAC address of the broadband router on the authentication server to limit the number of computers accessed.

2. At this time, we can connect the computer to be bound to the MAC address to the LAN port of the router when the router is disconnected from the network connection, and clone the MAC address of the local computer network card to the WAN port of the broadband router device through the MAC address copying function of the broadband router itself, and finally restart the route.

Finally, as a reminder, the router should be placed in a well-ventilated and heat-dissipating place as much as possible, the main purpose of this is to avoid excessive heating of the router, which will affect the normal operation.

A router is a device that connects various LANs and WANs on the Internet, and it will automatically select and set routes according to the situation of the channel, and send signals in the order of the best path.

Here's how to use the wireless router:

Step 1: Please link the device as shown in the figure below, power is the power supply) LAN is the output port, WAN is the network cable plugged into the port, and reset is the reset button (hold the sharp object for 5 seconds when you need to reset).

Step 2: After the connection is completed, check the running status of the indicator light. The sys system status indicator should be flashing, the 1 2 3 4 LAN status indicator should be solid or flashing at the corresponding light linked to the computer LAN port, and the WAN status indicator should be solid or flashing rapidly.

A router is the hub of the Internet"Traffic police"。At present, routers have been widely used in all walks of life, and various products of different grades have become the main force to realize the internal connection of various backbone networks, the interconnection between backbone networks, and the interconnection between backbone networks and the Internet.

The main difference between routing and switching is that the switch takes place at the second layer of the OSI reference model (data link layer), while the routing takes place at the third layer, which is the network layer. This difference determines that routers and switches need to use different control information in the process of moving information, so the way they achieve their respective functions is different.

Routing refers to the movement of information from a source to a destination over an interconnected network. Routing is the instrument for this activity.

Step 1: The newly purchased router will have an installation manual, which will indicate the IP address entered. For example, the wireless router in the figure below needs to be input, and some of the inputs are different.

Step 2: Connect to the wireless router, enter the IP address on the manual in the browser, and press enter. However, it is possible to find that it cannot be opened after entering, and you can use your mobile phone to connect to the wireless router network and open this IP address with a mobile phone browser.

Step 3: There will be a login prompt after entering the IP to open, the default account and password are admin, and log in after entering.

Step 4: After logging in successfully, click Settings in the left navigation.

Step 7: Enter two important and most important passwords. SSID is the account name of WiFi, and WPA is the password of the wireless network.

A router is a hardware device that connects two or more networks, acts as a gateway between networks, and is a dedicated and intelligent network device that reads the address in each packet and then decides how to transmit it. Here's how to use it:

1. After the router is powered on, it will first perform a post, power on self test.

2. After the POST is completed, first read the bootstrap program in the ROM for preliminary booting.

3. After the initial boot is completed, try to locate and read the complete ISO image file. Here, the router will first look for the ISO file in the flash, and if it finds the ISO file, then read the ISO file and boot the router.

A router is a hardware device, it is used to connect to the network, the network is not an infinitely extendable network, its coverage is limited, so there needs to be a connection between the network, this thing is the router. As a hardware device, it can read the address in the network packet, and then transmit it to the terminal, which is the mobile phone or computer we use.

A router is what connects your computer to a network cable. The biggest advantage of this thing is convenience, the province is always dial-up Internet access, and the wireless router can provide wifi.

The router is also relatively simple to use, connect the network cable and the computer in series on the router, and then enter the computer to set the account password in the router, and you can use it.

It is a network cable with several machines, and the Internet is accessed at the same time. Buy it back and set it up on the settings interface of the nearest router.

The basic information such as IP address, user name, and password is generally written on the nameplate at the bottom of the wireless router, and the default IP address is generally admin.

However, there are exceptions, such as NetGear's wireless routing products, where the password is changed to "password". There are also some "alternative" manufacturers that only write this information in the user manual, and users need to look it up carefully.

A router is a signal transmitter that can amplify the network and install broadband. On the back of the router we can see the relevant certificates, together, router settings**. Login page, the page on the back of the router, click on the network after the main page, enter the network broadband, you can modify it under the configuration, click to open the network configuration, security settings, you can set the wireless network password, click on the confirmation after modification, and you can use it.

Router,In fact, it is a distribution box,Originally, a computer with a network cable,With a router, you can use a network cable for four or more computers,Specifically buy a router with a manual,You can use it according to the manual。

If you have a manual, just follow the above operation, and if you have any questions, find me.

Find a suitable line, plug one end into the correct position of the computer host, you can see that there are several holes behind the router, plug in according to the correct direction, and then turn on the computer network, your ipad (the same is the same for others) can go online, if there is a wireless network card, directly turn on the computer power.

I'm guessing you're asking about the home-grade ones (routers have enterprise-grade ones).

1. For home-grade routers, it is used to increase access points, and the principle is that only one computer can access the Internet, and with a router, multiple computers can access the Internet.

2. For home wireless routers, wireless networks can also be provided for wireless devices to access the Internet, such as mobile phones, tablets, etc.

3. Then there are the functions of the router, such as limiting the network speed, managing network users, etc.

An IP address can be used by several users, and a router can be used by up to four users at the same time.

Network Connection:

The Internet line --- the WAN port of the router.

The LAN port of the router --- a computer.

Generally, it is used to transmit wifi, and it can be connected to up to four computers to access the Internet....Some are two-way. Generally, operators only provide modems connected to one computer.

Connect the network cable, and then start on the signal network.