Can you rivet 2 5mm plates, how big do you need to make through hole holes with 2 5mm diameter cornh

This rivet does not have a fixed name.

Generally, our manufacturers are collectively referred to as non-standard rivets.

Our factory has made such rivets.

The process of this rivet is simple, but it is laborious.

It is to first cold head a semi-hollow rivet at one time, and then the head needs to be turned and milled out of a slot.

Yes, the rivet gun is to rivet a metal plate that is not thick, just pay attention.

The riveting range of the rivet is the range between the minimum and maximum thickness of the riveted workpiece. For example: Hengfeng rivets:

The riveting range of stainless steel open round head blind rivets is stainless steel closed countersunk blind rivets, and the riveting range is 3-5mm. Wait a minute. A nail is a nail-shaped object with a cap at one end:

In riveting, the riveted parts are connected by self-deformation or interference. There are many types of rivets, and they are informal. Commonly used are R-type rivets, fan rivets, blind rivets (core rivets), tree rivets, semi-round heads, flat heads, semi-hollow rivets, solid rivets, countersunk rivets, blind rivets, hollow rivets, which are usually connected to the riveted parts by their own deformation.

Generally, cold riveting is used for those less than 8 mm, and hot riveting is used for those larger than this size. However, there are exceptions, such as the nameplate on some locks, which is riveted with the interference of the rivet and the lock body hole.

Don't know the kind of cornhole rivets you use.

However, the general openings are in between.

If it's a combination of corns, rivets can be.

Rod length = sum of the thickness of the two plates Rivet diameter x 1,6 --- riveting half garden head.

Rod length = sum of the thickness of the two plates Rivet diameter x 1,4 --- rivet countersunk head and flat head.

With rivets, drill holes in the top of the steel plate now, and select the corresponding rivet size specifications. Use a riveting gun, riveting can be used.

Not sure which one you use.

Countersunk rivets, according to GB closed countersunk blind rivets grade 11", 4mm rivets, dk=, but k(max). The thickness of the stainless steel you use is only, less than the thickness of the rivet head, and you can't achieve what you say. Whether the rivet can be selected, its k =

Can't you use argon arc welding spot welding, you are a design flaw like this, and the head is flattened.

Rivet specifications basic common sense.

There are many types of rivets, which are divided according to their uses: hollow, solid, semi-hollow, core-pulling, and core-hitting. And so on, the geographical restrictions have also produced the names of many places, but in terms of specifications, they should be noted in detail:

Head shape Diameter * head thickness * pipe diameter * length (excluding head thickness) * hole diameter * hole depth, normally, the hole diameter and depth have a standard can be omitted, if you don't have drawings or **, you should include these elements, and then tell the material, it can basically be produced directly.

Hollow rivets are usually used in clothing, footwear and other industries, solid need to be riveted again, used for heavy workpiece joints, often indetachable structure, semi-hollow rivets are the most widely used, bundle mouth (wire diameter tail is smaller) nails are made of hard wire, can penetrate the steel plate within the thickness without pre-hole, rivets can not be bent and deformed, widely used in lockboxes, suitcases and military bags, hollow nails (semi-hollow rivets) are made of soft wire, generally required to not crack after riveting, there are many types, At present, the shaft on some toys has begun to be replaced by semi-hollow nails or child and mother nails in a large area, which can greatly reduce production costs. Core pulls and core rivets are mostly used for riveting thinner soft materials, and the general requirements are not strict, and the manufacturing materials are usually produced with materials with good plasticity.

Commonly used are semi-round head, flat head, semi-hollow rivets, solid rivets, countersunk rivets, blind rivets, hollow rivets, which are usually connected by their own deformation to be riveted. (Generally, less than 8 mm is riveted cold, and larger than is riveted hot.) ）

There are semi-round heads, countersunk heads, semi-countersunk heads, flat heads, flat conical heads, flat round, flattened.

By what classification? Material? Structure?