What brand of brake pads is GT9310

Hello, there is no outer packaging.

How to maintain car brake pads.

Brake shoes, commonly known as brake pads, are consumables, which will gradually wear out in use, and must be replaced when worn to the limit position, otherwise it will reduce the effect of braking and even cause safety accidents.

Brake shoes are life-threatening and must be treated with care.

Most cars use the front disc rear drum brake structure, under normal circumstances, the front brake shoe wears relatively quickly, and the rear brake shoe is used for a relatively long time, and the following aspects should be paid attention to in the daily inspection and maintenance:

1.Under normal driving conditions, every 5000 kilometers of the brake shoe is inspected, not only to check the remaining thickness, but also to check the state of the shoe wear, whether the degree of wear on both sides is the same, whether the return is free, etc., and the abnormal situation must be dealt with immediately.

2.Brake shoes are generally composed of two parts: iron lining plate and friction material, and you must not wait for the friction material part to wear out before replacing the shoes. For example, the front brake shoes of the Jetta have a thickness of 14 mm, while the limit thickness of the replacement is 7 mm, including more than 3 mm of iron lining and nearly 4 mm of friction material.

Some vehicles have a brake shoe alarm function, once the wear limit is reached, the instrument will alarm to prompt the shoe to be replaced. The shoes that have reached the limit of use must be replaced, even if they can be used for a period of time, it will reduce the effect of braking and affect the safety of driving.

3.When replacing, the brake pads provided by the original spare parts should be replaced, only in this way can the braking effect between the brake pads and the brake disc be the best and the wear and tear should be minimal.

4.When replacing the shoes, a special tool must be used to push the brake cylinder back. It cannot be hard pressed back with other crowbars, which can easily cause the brake caliper guide screw to bend and make the brake pads stuck.

5.After replacing the shoe, be sure to step on the brake a few times to eliminate the gap between the shoe and the brake disc, resulting in the first foot without braking, which is prone to accidents.

6.After the brake shoe is replaced, it needs to be run in for 200 kilometers to achieve the best braking effect, and the newly replaced shoe must be driven cautiously.

Summary. Dear, I'm glad to answer for you, brake pads GT3011 is a brand of Firodo, Firodo brake pads are a well-known brand in the UK, and then acquired by Federal-Mogul in the United States, becoming its products, the first brake pads are manufactured by Firodo. Most of the products are sold in many countries around the world as supporting products of top automobile manufacturers.

Dear, I'm glad to answer for you, brake pads GT3011 is a brand of Firodo, Firodo brake pads are a well-known British brand, and after the noise was acquired by the American Federal-Mogul company, it became its product history, and the first brake pad was manufactured by Firodo. Most of the products are sold in many countries around the world as supporting products of top automobile manufacturers.

Brake pads, also known as automobile brake pads, are friction materials fixed on the brake drum or brake disc that rotates with the wheels. Brake pads are generally composed of steel plates, adhesive insulation layers and friction blocks, and the steel plates are coated to prevent rust.