Regarding the question of the new sunshine brake pads, does Nissan Sunshine have brake pad wear warn

How to maintain car brake pads.

Brake shoes, commonly known as brake pads, are consumables.

It will gradually wear out in use, and when it is worn to the limit position, it must be replaced, otherwise it will reduce the effect of braking and even cause safety accidents.

Brake shoes are life-threatening and must be treated with care.

Most cars use the front disc rear drum brake structure, under normal circumstances, the front brake shoe wears relatively quickly, and the rear brake shoe is used for a relatively long time, and the following aspects should be paid attention to in the daily inspection and maintenance:

1.Under normal driving conditions, every 5000 kilometers of the brake shoe is inspected, not only to check the remaining thickness, but also to check the state of the shoe wear, whether the degree of wear on both sides is the same, whether the return is free, etc., and the abnormal situation must be dealt with immediately.

2.Brake shoes are generally composed of two parts: iron lining plate and friction material, and you must not wait for the friction material part to wear out before replacing the shoes. For example, the front brake shoes of the Jetta car have a thickness of 14 mm for the new ones, while the limit thickness for replacement is 7 mm, including more than 3 mm of iron.

Liner thickness and nearly 4 mm thickness of friction material. Some vehicles have a brake shoe alarm function, once the wear limit is reached, the instrument will alarm to prompt the shoe to be replaced. The shoes that have reached the limit of use must be replaced, even if they can be used for a period of time, it will reduce the effect of braking and affect the safety of driving.

3.When replacing, replace the brake pads provided by the original spare parts, only in this way can the brake pads and brake discs be made.

The braking effect is best and the wear is minimal.

4.When replacing the shoes, a special tool must be used to push the brake cylinder back. No other crowbars can be used.

Hard pressing, which can easily cause the brake caliper guide screw to bend and make the brake pads stuck.

5.After replacing the shoe, be sure to step on the brake a few times to eliminate the gap between the shoe and the brake disc, resulting in the first foot without braking, which is prone to accidents.

6.After the brake shoe is replaced, it needs to be run in for 200 kilometers to achieve the best braking effect, and the newly replaced shoe must be driven cautiously.

Hello! Please be specific.

Hello, what problem do you want to ask the brake pads?

Hello, there is generally a brake pad alarm, the brake pad is thin will make a squeaky grinding iron sound, it needs to be replaced, I hope it will help you, I wish you a happy life [If you have a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

Hello, there is no electronic display, if there are fewer brake pads, stepping on the brakes will make a chirping sound, and the general brake pads will be replaced at 40,000. [If you have a problem with the car, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

Hello no! [If you have a problem with the car, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

Hello, there is no electronic display, I need to check, I hope it can help you [If you have a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

There is an iron plate on the brake pad to alarm, and you drive the brake and hear the sound of grinding iron on the brake, you have to check and replace the brake pad!! [If you have a problem with the car, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

Hello, yes, you hit the brakes, there is a strange noise, the kind that is hard to hear. That's when it needs to be replaced. [If you have a problem with the car, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

Hello, brake pads are generally replaced once every 4 50,000 kilometers.

Hello! Generally, it is about 6-80,000 kilometers to dismantle and replace, I hope it can help you.

Hello! Normal fifty or sixty thousand kilometers replaced.

Hello, the normal is 30,000 kilometers to check once.

Generally, brake pads need to be inspected every 40,000 kilometers. Depending on the specific wear and tear, it will be determined whether it needs to be replaced. There are many factors that cause abnormal noise, there will be a very harsh sound when worn to the limit, and if the brake pad has hard spots, there will also be abnormal noise with friction, which can be solved by talking about posture grinding.

[Zhonglian brake pads remind you - five major problems of brake pad maintenance].

The following problems should be paid attention to in the daily inspection and maintenance of brake pads: 1Brake pads should be checked every 5,000 kilometers under normal driving conditions.

In the inspection, it is necessary to measure not only the remaining thickness, but also the state of brake pad wear. Compare whether the wear degree of the brake pads on both sides is the same, whether the return is free, etc., if abnormal conditions are found, they must be dealt with immediately. 2.

Brake pads are generally composed of two parts: steel back and friction material, and you must not wait for the friction material to wear out before replacing the brake pads. Some vehicles are equipped with a braking system alarm function, and once the wear limit is reached, the instrument will alarm to prompt replacement. Brake pads that have reached the limit of use must be replaced, even if they can be used for a period of time, it will reduce the effect of braking and affect the safety of driving.

3.When replacing, it is necessary to replace the qualified brake pads produced by regular manufacturers, only in this way can the braking effect between the brake pads and the brake disc be the best and the wear is minimal. 4.

When replacing the brake pads, the brake cylinder must be pushed back with a special tool. It cannot be hard pressed back with other crowbars, which can easily cause the brake caliper guide screw to bend and make the brake pads stuck. 5.

After replacing the brake pads, be sure to step on the brakes a few times to eliminate the gap between the brake pads and the brake disc, and the brake pads need to run in for 200 kilometers to achieve the best braking effect.

Brake pads need to be checked regularly, not when you feel abnormal;

Generally, the brake pads of the disc brake wear out quickly, basically about 30,000 kilometers to replace, and should be checked once every 10,000 kilometers;

Generally, the brake pads of the drum brake are replaced for 60,000 kilometers, and they are generally checked once every 20,000 kilometers;

The brake fluid and booster oil are replaced every 60,000 kilometers, and the antifreeze is replaced for the first time every 2 years, and then once a year;

As for the engine oil, change it once every 5000 kilometers, this is daily maintenance, and it can't be changed if you don't change it! The oil grid is generally replaced once every 10,000 kilometers, and the oil is changed together, which is better for the maintenance of the car.

You can read the care instructions, or use the replacement according to the actual situation.

It should be right.,A pair is two wheels.,There are two pairs before and after.,One for at least one pair.。。。 [If you have a problem with the car, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

There are a total of eight brake pads on the front and rear four wheels, two on one wheel, and one inner piece and one outer piece [If you have a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

Hello, two pieces on each wheel, if you replace it, the front wheel should be a set, the rear wheel should be a set, and you can't change a wheel separately [If you have a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

Hello, it's very simple, if you're a car owner, it's track and field, and you can't get it right, if it's a car repairer, it's very simple

If you have a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

The ones you mentioned are all good, and it seems that Bosch's empty jujube brake pads are hard.

The golden unicorn is still good, especially the ceramic pieces!

Generally, as long as it is a regular manufacturer, the brake pads from the factory are Qinghe, and they can be used.