Apple 6 can t connect to the Internet, but other phones can connect to what s going on?

Hello, it is recommended that you take the machine and go directly to the official repair department of the mobile phone, and ask the master there to help you take a look.

1. First of all, make sure that your router is not working normally, you can use other mobile phones or digital products to connect to the wifi hotspot, if you can connect and surf the Internet normally, then generally speaking, this wireless router can work normally.

2. Secondly, make sure that the mobile phone with a problem with the wifi connection does not have the option to turn off the network in the sleep state, and there are many children's shoes that their mobile phones will be disconnected after a period of time or can not receive the information of the background chat software, most of them are because they inadvertently or mistakenly turn on the option of turning off the network from the mobile phone.

3. Wireless router problem:

1) Dead cycle - many wireless routers sometimes have a connection into a dead loop, that is, they keep getting IP and connecting, but they can't connect to wifi hotspots. - Let's try the all-purpose fix - restart. After turning off the power of the wireless router completely, turn it back on again after about 10 minutes.

2) Whether there are too many WiFi connection devices - too many digital devices connected to the WiFi of a wireless router will put a lot of pressure on the wireless router, and it is easy to cause IP conflicts and cannot be connected - such a problem can be solved by setting a static IP for each device connected through WiFi.

In this case, you can consider resetting your phone's network settings and restarting it.

Your Apple Six, if you can't connect to the Internet, first of all, I suggest you turn on your airplane mode, then wait a few minutes, then turn off the airplane mode and connect again to see if you can connect. Or you turn it off directly, and then turn it on again after a while to see if it can connect.

iPhone6 connection to the Internet is unsuccessful, it is likely that you have forgotten the wifi password and can log in to the wifi again.

If your mobile phone can't connect to the Internet, and other mobile phones can be connected, it means that the Wi-Fi account and password searched by your mobile phone are wrong.

That's a problem with your Apple Six phone, go get it repaired.

What's going on with Apple six times not being connected to the Internet, but other phones can? iPhones and other mobile phones. It's not the same.

1.Sometimes we encounter such a situation, the wireless network that can be connected to the original can be connected, and suddenly find that the connection is not available. For such problems, we can first try to delete the connected wireless network information, and then reconnect.

First, open the Settings app on your home screen.

2.Find the "Wi-Fi" column in the settings list and click to enter.

3.Next, in the Wi-Fi list, find the wireless network that you can't connect to, and click the "Info" icon on the right.

4.Then, in the Wi-Fi details list, if you have previously connected to a network, you will see the option to "Ignore this network", click on it to continue.

5.Then click the "Ignore" button to confirm the deletion of the original connection information. Finally, reconnect to the Wi-Fi network and see the results.

First of all, determine whether the wifi you are connected to is your own or someone else's, if it is your own wifi, you can enter the router settings from the computer to see if the access of other devices is restricted, other people's wifi, not much to say.

1. The wifi signal is unavailable and the mobile phone cannot access the Internet, that is, the wireless router.

The network is not set up or the router is faulty, resulting in the failure to connect to the network normally; You can restart the router to solve the problem; If necessary, the router can be restored to factory settings.

status, and then reset the network parameters of the router to ensure that the router is connected to an external network before the mobile phone can be connected to the Internet normally.

2. Secondly, there may be a conflict between the IP address of the mobile phone and the IP address of other devices connected to the router, so you can't access the Internet, you can disconnect other devices to connect to the router to go online, or enter the router's settings interface, bind a static IP address for the Apple mobile phone, and the mobile phone can return to normal Internet status.

3. If there is a problem with the mobile phone system and you can't access the Internet after connecting to the wifi signal, you can restart the mobile phone first to solve it; If it doesn't work, you can reset your phone's network settings, and then restart it to turn on the LAN.

The method is: open the phone's settings - Reset - Reset network settings.

It may be that the wireless network cable is not connected properly, turn off the router and turn it on again. You can also turn off your phone and restart it.

Most of the time it is an auto-provisioned IP issue.

1. Static can be changed to 10, and you can click the exclamation mark behind the network to enter the interface with an automatically matched IP address. : The IP address received in dynamic mode is 10, and the subnet mask is connected to the wireless network but cannot be connected to the network.

Apple devices. For Apple mobile devices, the wireless channel in the wireless router should be changed to 11 or 13.

If you still can't connect, set your phone to static IP mode.

Subnet Mask: Gateway: DNS1: You can also enter the regional generic DNS).

The reason for the network settings.

Open the "Settings" page of the Apple phone, go in, scroll down, find "General" and select it.

Then select "Restore" at the very bottom.

You can select the option that can be restored on the page you enter, and we select "Reset Network Settings".

The phone will then ask you to enter your phone password.

Once you've entered your password, you'll see a red option, and when you tap on it, your phone will restart and reset your network settings.

If the above methods do not work, it may be that the wifi environment is not good, or the password is wrong, so you cannot join the wifi.

1. If the opportunity allows; Restart the wireless router; See if you can solve the problem.

2. In Make sure your phone is within the wireless network coverage range, click "Scan" to refresh the wireless network list.

3. Connect the computer to the router through the network cable and log in to the management interface of the router.

4. In Wireless Settings - Basic Settings, the channel is between 1 and 11, the wireless function is turned on, and the router is restarted.

1. The unsuccessful wireless connection may be caused by incorrect settings of wireless password and other parameters. A new key entry attempt.

2. Please make sure that the wireless router does not have the wireless MAC address filtering function enabled; Wireless Settings - Wireless MAC address filtering, turn off the wireless MAC address filtering function Wireless Settings - Wireless MAC address filtering, turn off the wireless MAC address filtering function.

Three: What should I do if the wireless connection is successful and I can't open the web page?

First of all, check whether the router is connected to the external network, log in to the router management interface, and look at the running status - WAN port status, if it is 0, please follow the router quick setup guide to set it again.

2. If the computer can access the Internet, the mobile phone cannot; Check whether the SSID number of the wireless router is in Chinese; If it is changed to letters and numbers; Mobile phones sometimes can't effectively recognize Chinese:

3. If the above cannot be solved: we set a static IP for the mobile phone

4. The wireless router supports between 15-20 wireless devices; When the maximum number of connected wireless devices is exceeded, even though you are connected to Wi-Fi; But you're wireless; At this time, you can unplug the wireless router; Turn on the wireless router after 10 minutes.

That's when the wifi is broken and can generally be fixed.

Then it may be a problem with the wireless, the wireless itself cannot access the Internet.

1.Sometimes the iPhone may not be able to connect to the wireless network, such as not being able to connect, or being connected to the Internet and not being able to access the Internet. Again, find the "General" column in the settings list and click to enter, as shown in the image.

If you have set a restriction password, you will need to enter the password, as shown in Figure 5Finally, click "Reset Network Settings" at the bottom. Try reconnecting to the network after the restore and see if it works.

Even if it's his own family, it's someone else's.

The solution to the iPhone connected to wifi but unable to access the Internet: 1. Go to [Settings] - [Wireless LAN], and click on the wireless network name.

i. After entering, select [Ignore this network] and re-enter the password; 2. Go to the phone's [Settings] - [General] - [Restore] - [Reset Network Settings] (this will restore all network settings, including Wi-Fi passwords, VPN and APN settings, please make sure that the phone is unlocked and can be turned on and off normally without jailbreaking); 3. Restart the router and reconnect it again (ignore this step if you can't restart the router for public Wi-Fi or if you can't restart the router).