Why can t I log in to the WiFi settings page and say I or the password is wrong or invalid

I can't log in to the Wi-Fi or router management interface for the following reasons:

If the IP address is wrong, or the local IP is not on the same network segment as the route, the correct IP must be entered, and the local IP must be set to automatically acquire the IP address.

If you have forgotten your username and password, you can reset it by poking the "reset" button on the router with a toothpick or paper clip.

Incorrect usernames or passwords can be found by checking the manual or the router's factory label. Most of the cases where the username and password are admin or root.

The manual should be admin admin admin sometimes guest guest

Check this out and give it a try.

What is the initial password for the D-Link Router 504?

What is the initial password for the D-Link Router 504?

Username: root Password: root

Username: root Password: null or 1234

Username: admin Password: password or blank.

Username: user Password: user

Username: user Password: password

Kiss is happy to answer for you: Why does the wifi not connect to show the wrong password Answer: Kiss 1

Problems with the phone's firmware. The part needs to be repaired. Go to the mobile phone repair point to check whether the wifi parts of the mobile phone are damaged.

3.Problems with router settings. The router needs to be reset.

4.The phone's wifi settings are incorrect. The reasons why the wifi password is correct but always prompts the wrong password are as follows:

1.If you make a mistake and you cannot connect due to the wrong wireless password, you can connect by entering the correct password. 2.

If the device address is blocked and the device cannot be connected, the MAC address of the device is deleted from the route blacklist. 3.If the connection cannot be connected due to a system failure, restore the factory settings or upgrade the system to repair the fault.

4.If the hardware failure causes the connection to be invisible, go to the after-sales service or specialty store for inspection and repair. Here's how to fix it:

Restart your router and phone. It turned out that the storage selected the wrong encryption mode, e.g. the password set by WPA-PSK, and the last time I logged in to a WPA-PSK 2 router with the same name.

As a result, the password pair pattern is not correct, and the mentally handicapped device does not leave room for modification. Method: Click to save.

1 people like the learned elf 7c 04/23/2022.

Summary. 01 Cause analysis:1

There may be more than one default: general routers, the ** that enters the router option are, this is the default, but some routers are not, it may be or other, resulting in one** can't get in. 2.

Username or account input error: The default password may have been entered incorrectly and the password has been changed. 3.

Logging in to the router is restricted: You can use the option to allow some computers to log in to the router by setting permissions. 4.

To know the exact login of the router and whether it has been changed, it should be noted here that even if the router login is by default, it can be changed to other**. 2.Check if the router input ** is correct:

Ask the person who changed the password of the router; You can also restore the factory settings to let the password be restored to default; Before initialization, make sure to back up the broadband Internet access and password. 4.What to do if you can't get into the router options page:

Although the passwords are correct, but still can't enter the router option, it may be caused by the router running time for too long, try to unplug the router, and then turn it on again after a while may work, or click to restart the router.

Wifi settings can't be logged in.

01 Cause analysis:1There may be more than one **:

General routers, enter the router options**are,This is the default,But some routers are not,It may be or other,Cause a**Can't get in.。 2.Username or account input error:

It may be that the default password was entered incorrectly and the password was changed. 3.Landing on the router is restricted:

You can use the option to allow some computers to log in to the router by setting permissions. 4.The router is running for too long, although the ** and password are correct, it is also possible that the router cannot log in.

02 Countermeasures:1To know the exact login of the router and whether it has been changed, it should be noted here that even if the router login is by default, it can be changed to other**.

3.How to deal with ** or incorrect password: ask the person who changed the password of the router; You can also restore the factory settings to let the password be restored to default; Before initialization, make sure to back up the broadband Internet access and password.

4.How to deal with the router options page that can't be entered: Although the passwords are correct, you still can't enter the router options, it may be caused by the router running for too long, try to unplug the router, and turn it on again after a while may work, or click to restart the router.

I'm still a little confused, can you be more detailed?

The router login address is entered incorrectly; You can reset the router by pressing the router reset key and enter the default login address of the router. The router password is filled in incorrectly; You can reset the router by pressing the router reset key and enter the default login password of the router. The network cable of the router is connected to the computer and the wiring is incorrect; Check the network cable connection, connect the computer network cable to the LAN port of the router, and make sure that the network cable is in good condition.

computer browser malfunction; Change the browser and enter the router address to log in. Router failure; In this case, the router can be replaced.

The wifi password is obviously correct, but it says that the wrong reason why it can't be connected is as follows:

IP Conflict Issues

After the phone is connected to WiFi, the router will assign an IP address to the phone. If you don't connect for a long time, this IP will be used by other people, and there will be an IP conflict when you connect to WiFi again.

Solution: Restart the WiFi and wait for the router to reassign the IP address to avoid conflicts; If you still can't connect to this wifi after restarting the wifi, you can try to "delete" the wifi and connect again.

Authentication issues

The phone keeps showing that authentication is in progress, but it just can't connect to the wifi.

Solution: Check whether the Wi-Fi password has been modified and whether the DHCP function of the router is normal. If you have your own WiFi, you can log in to the background of the router system to check whether the WiFi password has been changed and whether the router DHCP address assignment function has been disabled.

Router or broadband problemThe router itself does not have enough machine, when the device connected to wifi reaches a certain amount, the router will refuse new device access, at this time we can manually delete some idle devices and clear out the connection quota to our own mobile phone.

The solution is to disconnect the router first, reconnect it after ten seconds, and if it still can't connect after restarting, you can contact the network provider directly.

Take another look.

Here's how to check your WiFi password for your wireless router:

1. Open the browser and enter the IP address of the router gateway in the address bar (there is a label on the back of the router, generally, enter the login username and password (generally admin);

2. After successful login, the running status will be displayed, click "Wireless Settings";

3. Click "Wireless Security Settings" again, and you can see your WiFi password.

1.If the password is incorrect, check the case and double-check the wireless network password in the router settings page.

2.If the DHCP function of the router is not enabled, the mobile phone cannot obtain the IP address.

3.Check that the name of the wireless network you are connecting to is your home's wireless network.

4.The router does not reboot after it is configured, and the configured content is not enabled.

Your wifi owner is blacklisted, so you can't connect to it correctly.

Cause: IP conflict

Your mobile phone has been able to connect to WiFi normally, but suddenly you can't connect to a certain WiFi, but someone else's mobile phone can connect normally, that is an IP conflict.

Normally, when the phone is successfully connected to wifi, the router will assign an IP address to the phone, and the phone will automatically save this IP, if you don't connect for a long time, this IP will be used by others, and when you connect to this wifi again, there will be an IP conflict, then your phone can't connect successfully.

Handling skills:1Restart the wifi

Turn off the Wi-Fi function of your phone, then restart Wi-Fi and wait for the router to reassign the IP address to avoid conflicts.

2.Reconnect after deletion.

If you still can't connect to this wifi after restarting the wifi, you can try to "delete" this wifi again.

Hello, the wifi password is case-sensitive, please confirm whether the password you entered is correct, if it is indeed correctly connected, it is recommended that you restart the router test, if you still can't connect, it is recommended to reset the router and reset the relevant parameters.

Hello dear, the password is wrong and you can't join the wifi solution party laughs violently: method.

1. Restart whether it is a router or a mobile phone, start it again. Method.

2. Re-turn on and off the wireless wifi of the mobile phone. The wireless wifi password is correct but the answer is false, and the wireless wifi cannot be connected, it may be because a system of the mobile phone is connected incorrectly, restart the wireless wifi to make it re-enter the working state. Method.

3. Cancel the saved network and re-enter the password. Unsaving the network allows the phone to "forget" the wireless wifi password that it has stored. After entering the correct wireless wifi password, it will be remembered by the mobile phone. Method.

Fourth, it is possible to rematch a new IP address through wireless WiFi. It is suitable for when the IP address of the mobile phone conflicts with others.