Interior decoration, can the caisson of the bathroom be backfilled with garbage?

Of course, you can't use garbage to backfill the caisson, after all, it is your own home decoration and you have to live for a long time.

The caisson of the bathroom cannot be backfilled with garbage, which will affect the use of the later check-in.

The caisson of the bathroom can be backfilled with garbage, but it is better not to use it, which is less environmentally friendly.

It is best not to use it, because it is easy to destroy the waterproof layer and it is easy to leak.

It is best not to backfill the caisson in the bathroom, after all, for the sake of environmental protection.

I don't think it's better to backfill it with caisson garbage, it's not good.

I don't think so, it's better not to do it.

Now 80% of the real estate is sunken bathroom, then it is necessary to backfill this sunken space, the construction waste used by the master when I decorate my home, do you say it works, the Internet says no, the master says OK, I am also confused, so what material is best for backfilling? Generally, the common ones are construction waste, prefabricated slab overhead, and ceramsite backfill, which one is correct? Let's compare them first!

1. Construction waste.

The most common is construction waste, which is low cost and convenient, but it is not recommended to use construction waste backfill, which can easily scratch the pipe. And if there is a problem with waterproofing, it is not easy to repair, and it has basically been eliminated.

Moreover, the void ratio between the garbage is large, then the storage capacity is small, and in the future use, the pressure above will cause the ground to sink, which will lead to the detachment of the floor tiles.

2. Ceramsite filling.

Such a backfill material is called, ceramsite backfill. The advantage of such a material is that it is lighter and the shell is harder. It has good physical, chemical and hydraulic properties, and has strong adsorption and sewage interception capacity.

Its surface is porous, angular, and rough. The two points are strong adsorption and pollution interception ability, that is, it can play a role in anti-odor.

Now they are all made of ceramsite, and the role is mainly to achieve a balance between evaporation and water absorption. In other words, when taking a bath, absorb and retain water, like a sponge, so that water does not penetrate. When you are not bathing, the water slowly evaporates due to evaporation and returns to a dry state.

3. Cement prefabricated slab overhead:

Overhead prefabricated slabs are a trend in caisson handling. By making a cement prefabricated slab (with reinforcement), and then using bricks to overhead it, the prefabricated slab can be covered on the caisson. This backfilling method effectively reduces the load on the floor without damaging the pipes.

It is easy to maintain, and it is equipped with an observation hole to facilitate daily observation and prevent it from happening. No water, no stinking!

4. Backfill with cinder;

Many people also use cinder, which is about 70 yuan, but this is not recommended, and slag and brick slag also have their disadvantages. The slag species contains sulfur oxides, which will form sulfuric acid with water in the future, which will have a certain corrosive effect on iron. The disadvantage of brick slag is water chestnut, which has a certain destructive effect on the waterproof layer.

In the end, I decisively chose the ceramsite, and the budget was a few hundred dollars more, but rest assured! If the bathroom is still using construction waste backfill, I advise you to change it immediately, it is outdated and risky. The master sincerely recommends that you use ceramsite, or backfill methods such as prefabricated slab overhead, which will bring more protection to the bathroom, and it is too troublesome to conceal the project!

Of course not, if you use construction waste to backfill, then once the bathroom leaks is very troublesome, the quality is not good, so you must not do this.

Hello, I have found out for you, this is not possible. 1. Most of the construction waste is stone concrete, etc., and its weight is relatively heavy, and for some bathrooms with a relatively large sinking height, it will increase a lot of weight, and it is generally not very safe. 2. The void ratio between the garbage is large, then the storage capacity is small, and in the future use, the pressure above will cause the ground to sink, which will lead to the detachment of the floor tiles.

3. The water absorption rate of construction waste is high, and the water vapor in the bathroom is often heavier, which will make the water accumulate below all the year round and damage the waterproofing of the ground.

I don't think so. Because there must be quality problems with construction waste backfill, it is not possible.

Hello, I am happy to serve you and make the following answers for you: construction waste backfill for sunken toilets refers to filling construction waste (such as bricks, concrete, mortar, sand, etc.) into the space of sunken toilets to increase the capacity and stability of the toilet. The advantage of construction waste backfill is that it can effectively reduce the generation of construction waste, reduce environmental pollution, and improve the capacity and stability of the toilet at the same time.

There are several ways to backfill construction waste, the most common of which is to pile up construction waste in the space of a sunken toilet and then fix it with concrete or mortar. In addition, concrete or mortar can be used to fill the space of the sunken restroom with the construction garbage to increase the capacity and stability of the restroom. The process of construction waste backfilling needs to pay attention to some matters, first of all, to ensure the quality of construction waste, so as not to affect the safety and stability of the sanitary excavation room.

Secondly, it is necessary to ensure that the stacking procedures of construction waste are correct, so as not to affect the safety and stability of the bathroom. Finally, it is necessary to ensure that the backfilling process of construction waste is correct, so as not to affect the safety and stability of the bathroom.

1.For the construction waste backfill of the sunken toilet, it is necessary to mainly use the interlayer materials such as construction waste, sand, crushed dendrites and limestone, and compact the materials in each layer, and carry out vertical compaction to ensure stability and prevent active settlement. 2.

When backfilling garbage, it is necessary to strictly control the filling height of garbage to prevent flooding, as well as the fineness of garbage, and the fineness of garbage is required to be less than 3cm to avoid affecting the normal use of the toilet. 3.For garbage backfilling, in addition to the sandwich material cushion, it is also necessary to carry out repeated vibration when the garbage is backfilled to achieve better stability.

4.For the backfill of construction waste in the bathroom, the cushion should be carried out according to the specified thickness to avoid the toilet drainage system being affected. 5.

In the process of garbage backfilling, attention should be paid to prevent garbage from being confused with concrete and other materials, so as not to affect the normal use of the toilet. 6.After the construction waste backfill of the toilet is completed, the garbage layer also needs to be treated with expansion agent to reduce settlement deformation and ensure the normal use of the toilet.

<> the preparation before backfilling: firstly, the caisson should be fully cleaned first, and then the inlet and outlet pipes should be solidified and dred, so as to avoid the movement of the pipeline position when backfilling, which is not conducive to removal or water ingress. Then there are also proportional requirements for backfill materials, the ratio of ceramsite and cement is generally five to one, and fully stir it with water, prepare the above can enter the actual work of backfilling, the stirred material should be paved, and fully compacted, leaving no gaps or bubbles, and finally can be covered with barbed wire or other materials to avoid material loss, and finally wait until the air dry can lay the floor tiles.

1. Garbage backfill increases the load of the floor slab, and the floor may sink to a certain extent after a long time; 2. Construction waste may have sharp corners, which are easy to damage the sewer layer and sewer pipe. Professional people do professional things, and my generation doesn't know much about it, so we can't fool cute readers with excerpts, patchwork, and imagination. Support me with a thumbs up, thank you.

I personally think that as long as it is not filled with toxic, harmful to human health, or to rot or deformed, there is no problem, and the bathroom backfill will often encounter the backfill with carbon slag or building slag, as long as the building slag is relatively clean and pure, I personally think it is useless.

Ceramsite, cinder, overhead, why do you have to use garbage backfill? The pipeline is easy to puncture, the waterproof layer is the same, after a few years, the ground suddenly sinks from time to time, and after a few decades, the building is aging, and the weight is not light and increases the load-bearing burden of the building. so…You are the owner you are the biggest.

If the waterproofing works are not done properly, leaks will occur in the future, causing damage to the neighbourhood. How to do a good job of bathroom waterproofing is very important, so how to choose bathroom waterproof materials? Today, Zhongyiju Decoration Network will introduce to you a new type of waterproof material - ceramsite.

This is the most economical and the most effective material available. Its water content is good, and it also has a certain structure, but it contains sulfur oxides, which will form sulfuric acid when exposed to water, and will have a certain corrosive effect on iron materials, soIt is best not to use the toilet with iron parts of the sewer pipe

Under normal circumstances, it is backfilled, which is convenient for waterproofing and relatively strong, so it is generally chosen to do so.

If there is a sinking phenomenon of backfill, of course, it is necessary to continue to fill, do not overhead, if it is overhead, then there will be loopholes, and it is very likely that there will be a fracture of this tile.

In fact, some are backfilled, and some are also overhead, which mainly depends on the method of the decoration personnel, and the backfill is more reliable.

Backfill should be chosen. Because this kind of decoration is stronger, and it can also make the setting of the bathroom more reasonable, reducing water leakage or other problems.

Should the sinking part of the home improvement bathroom be backfilled or overhead? What are the advantages and disadvantages of each? Now the main toilet is a sunken toilet, and the sunken toilet needs to find a way to block the pipe inside from the outside when it is renovated.

The method of bathroom decoration has overhead and backfill methods. If the method is not chosen correctly, it will cause a lot of trouble in the future.

<>At the beginning of my home decoration, I listened to the teacher's words when I was decorating the sunken toilet, but I didn't choose the right one, and it soon leaked! Overhead construction is easy, reduces the load on the floor, and does not compress the inside of the pipes. An important advantage is the ease of routine maintenance in the future.

If there is a problem, open the lid and you can see it at a glance. When using overhead, the waterproofing of the bottom must be done well, if the groundwater leaks or the pipeline leaks, the overhead layer becomes a large tank. A lot of homes basically use backfilling, but the way they operate varies greatly.

Elevated brick-concrete partition walls, caissons are divided into grids of about 400 400. This is something that many people won't do, but it's very important because with such a load-bearing partition wall, the concrete layer won't collapse. Otherwise, the bathroom floor will sink, crack, and leak after a few years.

Lightweight materials must be used when choosing backfill materials, ceramics are currently backfill color better materials, lightweight and can absorb water, if there is a small amount of water leakage, it can also be absorbed by ceramics. However, in order to save costs, many decoration companies use construction waste as backfill materials, which is extremely irresponsible. Due to the heavy weight of construction waste, sharp edges and corners can easily pierce water pipes and even corrode water pipes.

And there will be a lot of space, which is likely to cause the ground to sink and break. This kind of backfill is worse than overhead. Even if there is a small leak in the toilet, it can be easily drained by draining.

No matter which way you choose, waterproofing requires careful construction, especially overhead and backfill, which need to be designed for drainage, which will be better relative to water, but the waterproof quality cannot be ignored.

The above is a detailed interpretation of the problem, I hope it will help you, if you have any questions, you can leave me a message in the comment area, you can comment with me, if there is something wrong, you can also interact with me more, if you like the author, you can also follow me, your like is the biggest help to me, thank you.

Should choose overhead, backfill such a structure construction is very simple, and then the decoration cost is relatively low, be sure to choose strong water absorption of building waste, if the time is relatively long, the material will become heavier, will increase the burden of the bathroom; The overhead is made of prefabricated panels, which can protect the waterproof layer well, and it is very convenient for later maintenance and maintenance, but the requirements for construction are relatively high, and there may be water leakage.

Backfilling is better. The advantage of backfilling is that the construction is very simple and the cost is very low, but sometimes it will lead to poor water absorption, which may damage the waterproof layer. The advantage of overhead is that it will not increase the burden on the bathroom, and the later maintenance is very convenient.

The disadvantage is that it is more expensive, and the average person has no way to afford it.

Overhead treatment should be carried out, overhead treatment can avoid the situation of extrusion, facilitate future maintenance, can reduce the load of the floor, but there will be water leakage, the lower treatment has the effect of waterproofing, can be brushed waterproof in time, to avoid the situation that the wall is soaked, but the future maintenance is more troublesome.

The traditional backfill technology of the bathroom is generally completed in the form of construction waste, slag, ceramsite grid, prefabricated board overhead, etc., which is not only poor quality, high cost, cumbersome construction, but also has not been able to solve the problems of water leakage and peculiar smell in the bathroom, so that the life of thousands of families has been troubled, and even has a bad impact on health. Because of this, Guangzhou Jiyi Building Materials Technology is committed to research and development"Backfill One"It has opened a new era of backfilling, completely subverted the traditional backfill method, fundamentally solved the problems of poor quality, high cost and cumbersome construction of traditional backfill technology, provided the decoration industry with convenient construction, safe and environmentally friendly, and cost-effective bathroom backfill technology, and solved the problem of bathroom leakage and odor for thousands of families.

Backfill One"It is a new lightweight material containing a large number of closed pores mixed by foaming agent, water repellent agent, cement and water through a special mixer, so as to have the characteristics of lightweight, whole, water resistance and compression, which can completely solve the water accumulation in the bathroom sink and reduce the overall load of the building. In addition,"Backfill One"Compared with the traditional backfill method, it also has eight characteristics:

1.Durability. It has the same life as the main project, does not shrink and does not sink.

2.Operability. The construction is simple, it can be completed in 1-2 hours, and it is easy to maintain in the future.

3.Eco-friendliness. The required raw materials are cement and cement-based fillers, which do not contain harmful substances such as benzene and formaldehyde.

4.Liquidity. Before forming, it has super fluidity, and solves the dead ends that the construction of the waterproof layer of the caisson in the bathroom cannot be in place.

5.Wholeness. The overall pouring construction on site is closely integrated with the main project and will never settle.

6.Lightweight. This product contains a large number of closed pores after solidification, with a dry density of 300-350 kg per cubic meter.

7.Water resistance. The water absorption rate is low, the relatively independent closed pores and good integrity make it have excellent water blocking performance.

8.Stress resistance. The compressive strength reaches the above level to meet the needs of the project.