About Installing a Computer Hard Disk How do I install a hard disk on my computer?

The landlord bought a sata hard drive.

So you don't need to adjust the jumper, you can plug in the master and slave disks according to the number of SATA data ports on the motherboard. Interface 1 is the master disk, and interface 2 is the slave disk. Leave the rest alone.

After entering the system, right-click on my computer, manage -> disk manager-> there is an undigested disk in it, and you can right-click on it to partition the hard disk.

Right-click on my computer - Management - Disk Management, if the landlord originally only had one hard disk, then the newly installed hard disk will be displayed as disk 1, right-click on the black bar on the right side of disk 1, create a new partition, and then follow the prompts to operate, no need to jumper or set.

If you can see it, it's simple: You right-click on my computer, manage -- > Disk Manager -- > there's an unfractionated disk in it, and you can right-click on it to partition the hard drive, and as long as you're not a group riod, you don't need to set it up in the BIOS.

SATA hard disk does not need to set the main weight You plug the system into SATA1 and plug the system into SATA2 is the main weight.

It's not clear yet?

Partition first. Set up a jumper, the most important thing is to check the CD-ROM jumper, if the CD-ROM jumper is the main one, then the hard disk will not be detected! Optical drive set from, hard disk this master!

Unplug the jumper (a small black block) from the old hard drive.

If you are installing an inch hard drive, you need to prepare the SSD and bay before installing it. The purpose of the bay is to convert the inch SSD into the inch. Let's take a look at the Storm Chaser P500A chassis brackets, which have four prominent locations on the brackets.

The above is how to install a hard disk in a desktop computer and the steps to sail and swim. With a few simple actions, we were able to fully mount the hard drive into the computer and use it.

Hard disk: A computer hard disk is the most important storage device of a computer. Hard disk (called hard disk in Hong Kong and Taiwan, English name:

Hard Disk Drive (HDD) consists of one or more discs made of aluminum or glass. These discs are covered with ferromagnetic material. The vast majority of hard drives are fixed hard drives that are permanently sealed and fixed in the hard drive hand.

In the early days, hard disk storage media were replaceable, but today's typical hard disk is a fixed storage medium that is sealed in the hard drive.

First of all, open the package of the purchased hard disk, take the installation of solid state drives and mechanical hard disks as an example, and buy mechanical hard disks, generally with a mechanical hard disk, a sata interface cable, and 4 screws.

2. There are two SATA interfaces on the top of the hard disk, one is a large interface and the other is a small interface.

3. Open the case of the computer, and then follow the cable on the motherboard to find the idle SATA port on the motherboard.

4. Put the mechanical hard disk into the hard disk tray in the chassis and fix it with screws, the position of the chassis bracket is different, but there will definitely be more than one hard disk bay in Zhaosen, and more than one position to put the solid state drive.

5. Connect the SATA interface cable on the computer motherboard to the SATA interface on the hard disk. At the same time, connect one end of the small interface cable to the hard disk.

6. Finally, plug the interface cable of the small port into the small SATA interface on the motherboard. Generally, the motherboard will have 2 SATA interfaces, which can put two hard disks. (Because the example computer is an SSD installed, one room is a mechanical hard drive, and the other interface is a connected SSD.)