How to set up a road oiler using ADSL on the Internet

The specific settings are as follows:

For example, open a computer's browser, enter "http::8080" in the address bar, press the Enter key to display the user login prompt window, and enter the default management account and password in the broadband router manual to enter the settings interface.

In order for the router to be able to autodial, we also need to integrate ADSL into the router.

Click on the "Home" tab at the top, then click on the changed "WAN", see the place to set ADSL in PPP over Ethernet, enter the ADSL and password you applied for, and save the settings.

Now go to the "System Information" section of the "System Status" tab to check the network status, and you can clearly see the network information obtained by ADSL dial-up on the WAN side.

After setting up ADSL, we can access the Internet through the broadband router, but in order to better manage and improve security, we also need to do the following: click on the "Home" tab, and then select "DHCP" on the left, set the IP address range at the IP range that the DHCP server can enter, and the broadband router will have the function of automatically assigning IP addresses after saving.

The settings for tplink are generally as follows:

The username and password are admin

Click on the Setup Wizard to select ADSL Virtual Dialing.

Enter your ADSL account password.

You're done. After entering, you want to restart the route once.

If there is no problem with the settings, there is only one possibility that the telecom will block the route, causing you to be unable to access the Internet.

Ask your dealer or other users if this is the case.

Shenzhen broadband, 3G network high-speed wireless Internet access, network speed close to Shenzhen Telecom broadband, ADSL, Tianwei broadband 1 trillion bandwidth. Free Wi-Fi card:

Tianwei broadband, wireless network card, Shenzhen broadband, Shenzhen telecom broadband, wireless Internet access.

The instructions are very clear. Generally, you don't need to configure it, you can try to change the route first.

If you can't do it according to what the first floor says, or if it doesn't work, I suggest you take it to the merchant who sells the router, and let him help you get it back after you do it. It's a good idea to bring your broadband account number and password.

If the settings are normal, the inability to access the Internet may be due to a telecom blocked route. Then it's time to change the route of the guard.

The steps to set up the method by the device are as follows:

First of all, if you have a wireless router, then turn on the power supply first, then plug in the network cable, plug the incoming line into the WAN port (usually the blue port), and then plug in any LAN port connected to the network cable connected to the computer.

Step 2: After entering, you will see that you enter the corresponding account and password, and generally the newly purchased ones are admin.

Step 3: After entering the operation interface, you will see a setup wizard on the left, and you will enter (generally it will pop up automatically).

Step 4: Enter the interface of the setup wizard.

Step 5: Click Next, enter the Internet mode settings, you can see that there are three Internet access options, if the home is dial-up, then use PPPoE. Dynamic IP can be used by plugging the computer directly into the network, and there is a DHCP server on the upper layer.

The static IP is generally a private line or something, or it may be a cell bandwidth, etc., and the upper layer does not have a DHCP server, or wants to fix the IP. As I dial up, I choose PPPoE.

Step 7: Then the next step is to enter the wireless settings, you can see the channel, mode, security options, SSID, etc., generally SSID is a name, you can fill in at will, and then the mode is mostly 11BGNThe wireless security option is to choose WPA-PSK WPA2-PSK, which is so safe that it will not be easily cracked and rubbed by the network.

Step 8: The next step is to set it up successfully.

Step 9: Click Done, the router will automatically restart, wait patiently at this time. The interface that appears after success.

If it is a broadband cat connection wireless router that requires dial-up, set it up as follows:

1. Plug in the wireless router, don't connect the cat first, and connect the computer to any LAN port of the wireless router;

2. Enter the IP address of the router in the address bar of the browser (on the label behind the router), and enter the login username and password to enter the settings page;

3. Set up according to PPPoE (ADSL virtual dialing) mode, enter the Internet account and password;

4. Set the SSID, encryption method and password;

5. Save and restart;

6. After setting, connect the network cable from the cat LAN port to the WAN port of the wireless router.

Line connection router and setup steps:

1. Connect the line between the network cable, the router and the computer, and start the computer and the router equipment;

2. After starting the device, open the browser and enter it in the address bar to enter the wireless router settings interface. (If you can't get in, please look at the nameplate at the bottom of the router or the router instruction manual, the default settings of different models of routers are different.) ）

3. An account and password to log in to the router appear in the settings interface, enter the default account and password admin, or refer to the manual;

4. After successful login, select the interface of the setup wizard, which will automatically pop up by default;

5. After selecting the setup wizard, a window will pop up to explain that you can set the basic parameters of the router through the wizard, and click Next directly;

6. Set up step by step according to the setup wizard, select the Internet mode, usually ADSL users choose the first PPPoE, if you use other network service providers, select the following two according to the actual situation, if you don't know how to choose, directly select the first item to automatically select, convenient for novice operations, click next after selection;

7. Enter the account and password applied for from the network service provider, and go directly to the next step after the input is completed;

8. Set the wifi password, try to make the alphanumeric combination more complicated, and it is not easy to be rubbed off the network.

9. After entering correctly, it will prompt whether to restart the router, select Yes to confirm the restart of the router, and you can access the Internet normally after restarting the router.