Will the software in the mobile phone flashing be dropped, how to flash the OPPO mobile phone, tutor

I don't agree with the upstairs. After flashing, it is equivalent to clearing the data. After brushing the phone, it's like a newly bought phone. Your personal data will not be obtained.,For example.,Software or something.。。。 Flashing is actually very simple, and the following is the flashing tutorial.

Operation steps: Back up the data first, then copy the firmware package to the root directory of the phone's storage, shut down, press and hold the power button and the volume down button at the same time to enter the engineering mode in the shutdown state, clear the data and cache, manually select the installation file, and restart the phone.

Hand hit, thank you.

Flashing is equal to formatting, if you don't know, it is recommended not to brush, you can go to the mobile phone store ** brush only 30 to 50 yuan, so it is safer.

1.RE mode: RE full name recovery refers to a mode that can modify the data or system inside the Android machine, also known as engineering mode.

In this mode, we can flash in a new Android system, or back up or upgrade an existing one.

Entry method: Press and hold the power off button + volume - button in the shutdown state, and the phone vibrates once and then releases it to enter.

Flashing tutorial. Back up your data before flashing.

The first method.

It can be used by restarting automatically after the update is completed.

The second method: into recovery

In the corresponding firmware package, connect the mobile phone to the computer with a data cable, select 'Storage Device', and put the firmware package with the suffix ozip into the root directory of the mobile phone (the root directory is the top directory stored on the mobile phone);Or directly use the firmware package on the mobile phone, and put the firmware package with the suffix ozip into the root directory of the mobile phone (the root directory is the top directory stored on the mobile phone).

After pasting it in, you are ready to enter recovery mode, and the method of entering recovery mode:

After the phone is turned off, press and hold the power button and the volume button at the same time, and then let go when the phone vibrates, and enter the OPPO recovery mode at the same time.

Click directly on 'Chinese Simplified'

Click on 'Install Upgrade File'

Click on 'Save from phone'

Find the firmware package with the suffix ozip in the root directory and click to upgrade.

During the upgrade, you only need to wait for the upgrade to complete and do not do anything.

After the flashing is completed, click 'Restart' directly to complete the flashing.

Phone firmware upgrade tutorial.

With the upgrading of the mobile phone system, everyone is also more interested in the Android system upgrade, and the Android system upgrade generally refers to the upgrade by flashing. Next, let's introduce you to the firmware flash upgrade method of the Android mobile phone system

It is recommended to follow the following steps when flashing the firmware:

1. Preparation before flashing:

ColorOS 11 and above: Go to the ColorOS official website firmware package** area, OPPO official website> Service > System Upgrade**, and install the OPPO upgrade tool. Connect your phone with your computer according to the operation prompts on the tool, and the OPPO upgrade tool will detect and ** the latest firmware package for you.

ColorOS 7 and below versions: Enter the firmware package of the ColorOS official website** area, OPPO official website, > service> System upgrade, find the corresponding model, and then click on it.

Note: Currently, the firmware upgrade tool does not support the system upgrade of "ColorOS 6 model" and "ColorOS 7 to ColorOS 11".

3) Please keep your phone fully charged (more than 20%) before flashing.

2. Flashing tutorial.

Method 1: Flash the device in simple mode.

2) Click directly on the "firmware" installation package and then automatically restart the upgrade.

Method 2: Flash in recovery mode.

2) Turn off your phone, then long press the power button and the volume down button to enter recovery mode.

3) After entering the recovery mode, click Sun Bowen in Simplified Chinese > Install upgrade file > From the phone storage, find the firmware package with the suffix ozip in the root directory, click to upgrade, at this time, just wait for the system to complete the automatic upgrade, do not do anything, and click Restart directly after the flashing is completed.

If you have any other questions, you can enter the OPPO enterprise platform to ask customer service questions!

If you can enter recovery, flash the machine.

Enter Recovery Mode Method:

Method 1: If the phone is turned on, please turn it off first, remove the battery and then put it on, and in the case of power off, press and hold the power button + home button at the same time until the recovery interface appears.

Method 2: If the above methods cannot be entered, then turn on the phone again, press and hold the volume + button next to you, and then press and hold the power power button until the recovery interface appears.

Recovery flash, the steps are as follows:

The hole lead will flash the ROM from the corresponding mobile phone on the Internet**, and then copy it to the root directory of the SD card, the ROM is in zip format (you can open it to verify it, the ZIP package must have meta-inf in this folder is the flash package, but do not change the files in the ZIP package), do not unzip. After the copy is complete, you can disconnect the phone and the computer.

Shut down the computer completely (it is best to pick the battery after shutting down), and then enter the recovery interface through the special button combination.

Select Wipe Data Factory Reset and press the power button to confirm, then press OK with yes. Then select Wipe Cache Partition and press OK, and select Yes to OK. (This is the legendary double WIPE, friends who know about flashing must have heard of it).

Select the fifth option, install zip from sdcard, press the power button to confirm, then select choose zip from sdcard, press the power button to confirm, then select the rom to flash the file, press the power button to confirm, and then select yes and press the power button to confirm to start flashing.

After brushing, that is, the interface after the progress bar is finished, return to the main interface of recovery. At this time, select Reboot System Now and press the power button to restart the phone. The first reboot takes a long time, so be patient! That's the end of flashing.

If you flash the machine, you can use the flashing software of the slow Zheng mobile phone version,For example,ROM,Brush machine elf,Brush master,Computer version of the brush machine digging which eggplant assistant judges,Brush master computer version,Brush machine elf computer version,Heartfelt reminder:Flashing is risky,Strong brush needs to be cautious。

Flashing is risky, it is recommended to consult a professional.

You can give it a try by upgrading it again, and if that doesn't work, you can connect your phone to your computer.

Pro-1It can be caused by various factors such as malware installation, poisoning, etc. It is recommended that you try to uninstall the software and game resources installed on your phone and use the antivirus software in Security Manager. Check your phone for viruses again.

2.Back up the text messages, ** number and other data on your phone, and restore your phone to factory settings.

Choosing a line brush can solve the problem Line brush treasure can help you solve the problem Oh Lite and root versions of the package are available.

First, after the mobile phone is flashed, the previous software is still not caused by double clearing.

Double clearing is required before flashing, because the data is cleared through double clearing to achieve a clean flashing effect (that is, to clear the data left by some apps), and at the same time, in order to avoid system instability caused by other factors.

Second, the operation method Steps:

1. Boot into recovery mode (hike is to press and hold the power button + volume plus key to enter, 2, and then click the home (that is, the middle key at the bottom of the hike screen) button to enter the recovery main page).

3. After entering, there are the following two fronts:

wipe data/factory resetwipe cache partition

4. Select the volume up and down, and confirm the menu button (that is, the leftmost button at the bottom of the screen of hike).