How can I flash my OPPOr7005

Card swiping: Use memory cards (SD, TF, etc.) to flash the machine, card swiping process:

3. Shut down, remove the SIM card, install the memory card, and it is recommended that the important things in the memory card should be backed up.

4. When shutting down, press the power button and the volume plus button at the same time, about ten seconds, and then let go.

5. Enter the recovery mode, i.e. REC mode.

6. Select Wipe Cache Partition to clear the cache.

7. After clearing the cache, select Wipe Data Factory and restore the factory settings.

8. Select "Install Zip from SDCARD", the power button is OK, then select Apply SDCARD:update, and the power button is OK, that is, select the flash package from the memory card to flash the machine, and wait patiently for it to be completed.

1.RE mode: RE full name recovery refers to a mode that can modify the data or system inside the Android machine, also known as engineering mode.

In this mode, we can flash in a new Android system, or back up or upgrade an existing one.

Entry method: Press and hold the power off button + volume - button in the shutdown state, and the phone vibrates once and then releases it to enter.

Flashing tutorial. Back up your data before flashing.

The first method.

It can be used by restarting automatically after the update is completed.

The second method: into recovery

In the corresponding firmware package, connect the mobile phone to the computer with a data cable, select 'Storage Device', and put the firmware package with the suffix ozip into the root directory of the mobile phone (the root directory is the top directory stored on the mobile phone);Or directly use the firmware package on the mobile phone, and put the firmware package with the suffix ozip into the root directory of the mobile phone (the root directory is the top directory stored on the mobile phone).

After pasting it in, you are ready to enter recovery mode, and the method of entering recovery mode:

After the phone is turned off, press and hold the power button and the volume button at the same time, and then let go when the phone vibrates, and enter the OPPO recovery mode at the same time.

Click directly on 'Chinese Simplified'

Click on 'Install Upgrade File'

Click on 'Save from phone'

Find the firmware package with the suffix ozip in the root directory and click to upgrade.

During the upgrade, you only need to wait for the upgrade to complete and do not do anything.

After the flashing is completed, click 'Restart' directly to complete the flashing.

Card swiping steps: 1, first of all, transfer the ROM that matches your mobile phone model to the mobile phone SD card, and then start to enter the REC flashing machine (the method to enter the REC is to first completely shut down and then press the power button and volume down together to enter, each manufacturer and each mobile phone model is different, so the method of entering REC will be different).

2. This is the REC main function interface.

reboot system now reboot the phone;

Wipe Data Factory Reset Erase user data and restore factory settings (an option that must be performed before flashing).

Wipe Cache Partition clears the system cache (you must execute the option decision before flashing).

nstall zip from sdcard Install the ZIP upgrade package from the SDCARD.

Backup and Restore (equivalent to the mobile version of Ghost one-click backup and restore).

mounts and storage options.

Advanced settings.

3. First select the third and fourth ones for double clearing.

Wipe Data Factory Reset and Wipe Cache Partition Dual Wipe", yes OK Wait for the cleanup to complete, select the second item from the SD card to select the flash package to flash the machine, and find yes If you find that the flash package cannot be read in the REC, please change the name of the flash package to .

4. Wait for the flashing to be completed, select the first item to restart the flash, and the flashing will be completed.

Enter recovery mode and swipe.

Enter Recovery Mode Method:

Method 1: If the phone is turned on, please turn it off first, remove the battery and then put it on, and in the case of power off, press and hold the power button + home button at the same time until the recovery interface appears.

Method 2: If the above methods cannot be entered, then turn on the computer again, first press and hold the volume + button, and then press and hold the power power button until the recovery interface appears.

Recovery mode (power key OK, volume up and down keys to move), the steps are as follows:

1.Flash the ROM from the corresponding mobile phone on the Internet, and then copy it to the root directory of the SD card, the ROM is in ZIP format (you can open it to verify it, the ZIP package must have meta-inf This folder is the flash package, but do not change the files in the ZIP package), do not unzip.

2.Shut down the computer completely (it is best to pick the battery after shutting down), and then enter the recovery interface through the special button combination.

3.Select Wipe Data Factory Reset and press the power button to confirm, and then press Yes with the selected Yes. Then select Wipe Cache Partition and press OK, and select Yes to OK.

4.Select Install Zip from SDCARD Press the power button to confirm, then select choose zip from sdcard and press the power button to confirm, then select the ROM flash file, press the power button to confirm, and then select yes and press the power button to confirm to start flashing.

5.After brushing, that is, the interface after the progress bar is finished, return to the main interface of recovery. At this time, select Reboot System Now and press the power button to restart the phone. The first reboot takes a long time, so be patient! This is the end of flashing.