To prevent the danger of electric shock for babies, how to design wall sockets at home?

Personally, I think that the current home decoration and wall sockets at home should be protected, and they can also be placed out of reach of the baby, which is safer.

It is possible to set up a protective enclosure that will not be dangerous if you have it. It is also very safe, because children are very disobedient.

To prevent the baby from being electrocuted, the operation at home is best designed to be a little higher, and do not let the baby touch the place.

Now there is a wall socket to prevent children from being electrocuted when decorating the house, so we mainly communicate with the decorator.

It is especially good that I can buy the kind of socket that protects the baby, because it can effectively prevent the baby from electric shock.

The children were very curious and wanted to touch the socket when they saw it. Once, the child disappeared in an instant, and after looking for a long time, he found that he had crawled under the table and was about to touch the hole in the socket with his little finger. I hurriedly shouted to stop, and the child began to cry in fright.

I quickly picked up the child and explained to him the danger of electricity in the socket. The child is too young to understand. I turned on the computer to show the child the electric shock**, put a lot of it to him, and told him that the electric shock is as painful as the injection, and it hurts more than the injection.

After that, the child rarely touches the socket.

When he grows up, tell him to plug the socket where you take the skin. There is no electricity. I told him it was safe.

You'll understand when you get to school. 360 has safety outlets, you can understand ah, it will"Safety"As the core technology, the power strip adopts 6 layers of protection measures to take home security to a new level. It is understood that these 6 protection measures include lightning protection technology, anti-surge technology, flame retardant materials, overload protection, overload current limiting and child safety doors.

The material is an important factor in determining the safety performance of the socket. At present, the most commonly used material on the market with high safety performance is PC material. This material has excellent electrical insulation, has the advantages of self-extinguishing, flame retardant and non-toxic, does not burn for 60 minutes below room temperature 120, and leaves the open flame within 15 seconds below the ultra-high temperature of 850, which can be highly efficient and fireproof to ensure safety.

In addition to checking the performance of the external material, the internal structure of the socket is also key to ensuring safety. Check that the copper and wire connections inside the socket are handled properly. At the same time, in order to prevent children from accidentally being electrocuted, a safe socket should be protected by a safety lock, and the safety lock protection includes:

Tightly protected door and unilateral self-locking double protection. Weigh the weight of the socket with your hands and feel it. The socket that meets the national standard is mostly copper wire inside, the copper sheet is thick, the plastic shell is tight, and it is relatively heavy, and the unqualified socket twitch material can obviously feel a lot lighter.

To buy a socket, you must choose a well-known brand on the market to buy, first of all, the quality of the socket, the safety of the socket can ensure the safety of electricity and personal safety; Secondly, the purchase of branded sockets, even if there is a failure, it is convenient for repair, return and other after-sales services. Finally, it is necessary to pay attention to whether the product parameters, manufacturer's production address, instructions for use and quality certificates are clearly marked on the outer packaging, so as to avoid buying counterfeit and shoddy products.

1.For younger babies, parents can purchase socket covers to prevent babies from being touched in order to prevent them from being electrocuted.

2.For older children, parents still need to tell their children about electricity safety and educate their children about electricity safety in a timely manner.

3.If you are over 3 years old, and the child still sneaks into the socket after talking about electrical safety, I recommend beating it up.

I think the socket should be placed in a relatively high place, that is, out of the reach of the baby, and at the same time, you need to pay more attention to the baby.

Every family needs to install a wall socket, like a baby in the house is especially afraid that it will be electrocuted.

Be sure to install the wall socket higher, if you can only press it lower, be sure to replace it with the form that can block the hole, so that even if the baby inadvertently touches the switch, there is no way to touch the conductive part of the switch. Also, you must usually go to tell the baby some, don't touch the socket, if the baby's age is really very young, be sure to install a socket cover on the socket and then cover it.

There are many babies who especially like to imitate their mothers to pull out the plug, especially the fingers are very easy to touch the electricity, which is the main factor of the baby's electric shock, so we must teach him a lot, don't let it touch the socket. Especially in the summer, electricity is the outlet in the home during peak hours. Some parents must go for some thorough inspections and repairs in case some accidents happen.

If there is really an electric socket that the baby can touch, you must install some protective boxes on the electrical socket to prevent children from getting plugs and electric jacks. And after using some electrical appliances, immediately unplug his socket and put it back in a safe place.

Do everything not to let the baby get electrocuted, after using some hair dryers or electric irons, be sure to pull out the latch immediately, and then put it back in a safe place, and also pay attention to the water temperature of the electric thermostatic water boiler to be placed, must not let the child touch.

Also, from the time the baby begins to be sensible, you must hand it over to him, and never touch some charged objects. Do not put wet towels or some clothing bags on the wires, and put scissors or wires and other items that can conduct electricity on the wires.

And in the children's room, don't put too many electrical appliances, especially especially for very young children. Especially like some electrical appliances on the ground, to prevent the baby from tripping and causing electric shock. Like some electric lights in the house, or some other electrical appliances, if his wires are damaged after being wet, they must be replaced or repaired in time, and the power plug should be used for insurance.

An insulating tape fixes it, no matter how the power plug and socket or charger are set, it must not be placed in a place where the baby can touch it. Also, if you go to repair some electrical or debug some electricity, don't let the baby be present to avoid him imitating it.

The wall socket at home should be set out of the reach of the baby as much as possible. Alternatively, a plug-in plate with a protective cover can be used. These are good ways to prevent your baby from being electrocuted.

A wall socket with a protective cover can be installed, or a socket with a baffle at the installation socket to prevent electric shock to small children.

The wall socket needs to be installed at a height that the baby can't reach, and secondly, a safety socket needs to be selected to prevent accidental reach.

After having a baby at home, many things have to be reconsidered, for the health and safety of the baby, everything is worth it, for the installation of sockets here everything is to make each other safer. So how do you install it to be safer?

The main consideration here is that it is good if the child does not reach itIn ordinary life, many people like to put the socket on the ground, whether it is mobile phone charging, or tram charging, there is not a lot of thought about how to arrange the location of the socket.

If you have a baby, you need to consider the safety of the baby, the socket is not good on the ground, and even the socket wire is placed on the ground, and the baby is easy to pull around when playing, or playing along the socket line from one end to the other, these are particularly dangerous things.

Then in the choice of sockets, try to choose some closed sockets, this kind of socket is not plugged in, the socket mouth is equivalent to the closed situation, sometimes even if the child picks it up, there will be no electric shock, which can relatively protect the child, but also protect the adult,If there is a condition, the safety switch of the home circuit can be increased, and if there is an electric shock, the power will be cut off immediately, which relatively improves the safety of household electricity.

In the end, no matter how it is arranged, it is good to consider that the child can't reach it, and it is a great responsibility to keep the baby away from the source of danger.

Install it at a higher angle, or install an anti-shock box above the socket.

The socket can be placed out of the reach of the baby, and you can also use an anti-electric shock socket.

The socket is best pressed out of the reach of the baby, so as to prevent the baby from being electrocuted.

It is best to install the socket out of the reach of the baby, and remember to keep dangerous items in a safe place.

Something protective should be installed at the socket and then try to block it with a sofa.

It can be on the ceiling, and the baby will never touch it, which is good.

The socket should be installed as high as possible, and parents should take good care of the baby.

It's best to be higher on the bright side, and if the baby can't reach it, you don't have to worry about it.

Put it higher, or buy a socket with a safety door, so you can rest assured.

The meaning of the usually safe five-pin concealed socket is:

Equipped with child protection baffle: In order to prevent children from curiously probing the socket hole, an anti-probing baffle is installed in the socket, and the child's fingers cannot reach into the jack, and the plug pole piece can be inserted into the socket by opening the baffle;

Protective grounding jack priority: When the three-pole plug is inserted, the grounding protection pole must be inserted into the protective grounding jack of the socket first, and the remaining two poles can be inserted after the top open baffle. So as to ensure that the shell grounding wire of the electrical appliance is first connected with the grounding protection wire on the line;

Waterproof and splash sockets: In bathrooms, balconies and other watery locations, it is necessary to install sockets with waterproof covers to prevent water from splashing into the sockets.

Concealed installation: Concealed installation is to dig holes in the wall and install a concealed wire box, and the socket panel is installed on the concealed box, and the panel is basically flush with the wall to maintain the appearance.