The white screen problem of the Nokia 7610 that has been bothering me for a long time

There are two ways to format the phone (it will erase the contents of the phone, and it is best to back up the ** original information before doing future work).

Soft grid: Enter * on your phone and then ask you to enter the lock code, the initial password is: 12345, if you have changed the phone password, it is the changed password (not the SIM card password).

After that, a white screen appears, only the word nokia is displayed, and it can be completed after 3 or 5 minutes, and you need to re-enter the phone time after the grid is finished.

Hard grid: Turn off the computer first, press and hold the dial key, "* key, "3" key while turning on the computer, and turn on the power at the same time until the word "nokia" appears. You can't let go of any of the keys during this process, wait a few seconds until "formatting...... appears", then you can release the key.

This method of lattice is also completed after 3 5 minutes of system formatting, the phone automatically restarts and enters the standby screen, and the time of the mobile phone needs to be re-entered.

Important!!

First, to keep the power absolutely sufficient, can not try to shut down the machine on the way, can not plug in the charger, etc., if it is violated, it may cause serious consequences such as burn-in.

Second, the hard grid may be a little damaged to the machine hardware, and the hard grid should not be used until it is absolutely necessary.

3. After the grid machine, the "line 2" will disappear, and it must be flashed to KF to recover.

Go to customer service to brush off the machine, no, there is a problem with the machine.

Try the following:

1.Pull out the card, restart, (this step is to check whether the problem software is in the C drive or in the card method, such as the card pulling problem is solved, then the problem is the software that exists in the card.)

2.Take a look at the software that starts randomly, especially the software programs that were installed for a period of time before and after the problem, and then try to remove the software and restart it, if it doesn't work......

3.It's not good yet, and it's not too late to ...... the machineIsn't it? It is not a good way to solve problems and learn!

4.It is also possible that it still does not work after the grid, so you should try to flash the machine and send it for inspection.

The repair shop is OK, and the upstairs is copied, and you can believe him.

There is no problem with 7610, there are two scenarios for this kind of problem:

1. There are too many software installed in the mobile phone, and I can't react when I boot it.

Second, software conflict, you see if your mobile phone is installed with a lot of software, for example, whether it is installed at the same time Sogou input method and caller, now the versions of these two software conflict with each other, if installed at the same time, no problem at the beginning, but as long as you turn off, it will be white screen when you turn it on again, and there are more software conflicts with Sogou.

If the white screen does not turn on, it is recommended that you hard-file the machine and uninstall the conflicting software and unnecessary programs.

Hello landlord, as you said, the quality of Nokia mobile phones is still quite good, but what I want to tell you is that the LCD of Nokia mobile phones is not produced by Nokia itself, it is designed and strict requirements by Nokia, and then the supplier to complete, generally choose a relatively large supplier, such as Samsung, sharp, etc.

According to your description, there is still no way to confirm what the problem is, it is recommended that you go to a regular Nokia service point to replace the LCD to check, if it is OK, it means that the LCD is broken, if it still does not work, that is, there is a problem with the phone itself, then you can take the advice of a few people upstairs, update your mobile phone software to try. I hope you will solve the problem soon, if there is any problem, you can send me a message.

Try the hard grid machine, if it doesn't work, the screen is broken.

Mine has just been white, oh, so depressed, can play**, but I can't see anything.

Re-flash the system Choose me, home, I'll help you remotely.

Nothing important! Get off the plane! It's good to turn it on!

This is a very simple system problem, you can first soft or your own phone, of course, it is best to reinstall the system, commonly known as the flash system.

1. The simplest is to use the "Factory Reset" function in the phone settings, and follow the prompts.

2. Enter * - soft reset of the mobile phone (save ** number, information, incoming and outgoing caller numbers, etc.) after the grid).

3. Enter *, the original password is 12345. Will your phone prompt you to restore all factory settings? The phone will restart, select Yes, and then enter the lock code, the default is 12345, and select Confirm after entering.

Note: If you boot up and start the e-disk software (such as call enhancement, screen saver, etc.) and Q9 and T9 fonts, it is invalid to format them with this method. Therefore, before the soft grid, close all these software, and delete the Chinese font file before the format can be successful.

Font files are generally under system fonts, please change the name to the fonts directory to delete the font file, and then delete!

Hard-grid machine - This method is generally used when the system is so chaotic that it cannot be turned on:

Power off, press and hold the call button + 3 number button + * number key + and then press power on when turning on. Don't let go, and then a line of English appears, and the formatting begins. This formatting is more thorough and does not cause invalid formatting.

Other: Turn off and press the * + power on button, and start the grid without any prompt.

Note: Sufficient power must be guaranteed when formatting, and it should generally be operated when it is fully charged. It's a good idea to uninstall all the software and see if you get any similar "system errors".

If there are no similar "system errors", then proceed to the grid. Do not attempt to shut down the machine during the grid, do not plug in the charger, etc. Also, try to give priority to the soft grid.

The software part that was originally installed on the MMC card will be affected after the grid machine, so under normal circumstances, the important data of the MMC card will be backed up and then formatted, and all the programs saved in the E disk will be reinstalled after the formatting of the mobile phone is completed.

In short, the most thorough formatting steps are: uninstall all the programs that can be uninstalled in the program management - take out the MMC card - check whether there is a system error - format the phone - install the MMC card - format the MMC card - the mobile phone at this time is the purest basic system) - install the programs that need to be installed - restore the address book - complete By the way, I also introduce a good business to friends in need, please click to understand.