USING THE XP INSTALLATION ASSISTANT STARTUP ITEM, THERE IS AN EXTRA WINXP STARTUP ITEM SYSTEM BLUE

After starting the computer into win7, right-click the "computer" icon, select "properties" in the pop-up shortcut menu, enter the "system" option, and then click on the left "advanced system settings", pop up the "system properties" dialog box, and then click the "advanced" tab, in the "startup and failback" group, click "settings", pop up the "startup and failback" dialog box, click the drop-down list of the "default operating system" item of the "system startup" tab, two startup items appear—— Windows 8" and "Windows 7", just choose the startup item you want.

In addition, the default display time for "Windows Startup Manager" is 30 seconds, if you think it is too long, check "Show recovery options when needed" and change the time to 5 seconds. Click "OK" to return to the "System Properties" dialog box, then click "OK", and click the close button in the upper right corner to exit the settings. Once you're done, reboot and the default option is the startup item you chose.

To start --- run, enter cmd, right-click cmd to run as administrator, and in the pop-up command line, type bcdedit delete f

In this way, there will be no XP startup items when booted.

You can copy that line of commands, then right-click and paste it on the command line.

You type: in Runtime

msconfig.

Or recommend a tool --- Super Bunny.

You can see this by running msconfig at the beginning.

It's all very good, everyone on the earth knows it

To get started, run "msconfig" and that's it.

First of all, you take off the memory, use a rubber sassafras to light back and forth on the gold finger, restore it on it, and if it is not possible, change the memory or install the system.

Kindness! If you want to know what the reason is, you have to watch**, next time there is such a problem, look at ** first, I will provide you with a blue screen**Daquan, you will understand it by comparing it.

This is a typical memory contact is not good, you just plug and unplug the memory again, unplug the memory and brush the memory slot on your motherboard with a brush; If you have a blue screen, it is also possible that there is a problem with the hardware driver you have installed, and then your CPU temperature is too high, and the fan is not very good.

Software conflicts with reinstalling the system first try Safe Mode.

The hardware is unlikely because it was good before.

If that doesn't happen in the future, it's a bad memory contact. The way you use it, it's solved. If it's still like that in the future. It should be a problem with the system. It's better to reload it once.

1. You take off the memory and use the eraser to gently sassafras back and forth on the top of the gold finger.

2. System reinstallation.

3. If the problem still appears, you start from two aspects: 1) the system disk, whether it is available or not; 2) Swapped out the memory.

There is a hardware problem, a compatibility problem between the hardware, it may be a loose memory module. It is recommended to reseat the board.

The reasons are varied. If the above doesn't work, you can try to press F8 to enter safe mode when starting. Get rid of the rogue program with the software that removes the rogue program.

Don't skip the boot of the C drive check.

There are many more ways to do this. If you don't know it. It's best to find someone who repairs computers. Dig up some experience on your own.

1. Due to the problem of hard disk mode, there are generally 2 hard disk transfer modes, ahci and IDE. The original XP installation CD does not have an integrated SATA controller driver, so you first need to change the hard disk mode to the IDE in the BIOS

2. Press F2 to enter BIOS (different notebooks may be slightly different), select IDE in SATA mode, and press F10 to save and restart.

This is the system self-test program after your abnormal shutdown,Help you check the file and there is no damage,And automatically help you repair the file,So,It doesn't matter,You let it self-test to enter XP,Don't cancel,Otherwise, the next boot will still have to self-test。

It is recommended that you reinstall the system now, if it has not been solved, then it may be a hardware problem, unplug the memory module, use the eraser to erase the gold finger, and take a look.

If it's not good, it's possible that your memory module is broken, or it's the motherboard.

Problem!

Check the quality of your graphics card and memory modules.

The following ones you mentioned are just hard disk checks done at boot due to abnormal system shutdown, which is not directly related to the problem you appear in.

Yes, that's a hard drive check, maybe your host has some loose hardware, such as a memory module!

1. Reboot, quickly press F8. Use the arrows up or down to select "Last Correct Configuration ('Your Most Recent Settings in Action").

2. Select (Safe Mode). Press enter to enter.

3. In the pop-up dialog box, select Yes.

4. Go to the desktop and click on the start menu.

5. Click All Programs, and then select "Control Panel".

6. Click "Add or Remove Programs".

7. Select the program you want to delete.

8. Click Yes in the dialog box to uninstall it. Reboot the system again.

If the above methods do not work, it is recommended that you can choose the Xiaobai one-click reinstall system tool to reinstall the XP system on the USB flash drive, which can solve the system problem.

In addition to this, it could also be a hardware issue. Take out the motherboard battery and put it on the charge, plug in and unplug the memory, clean the graphics card, and check whether there is a problem with the hard disk. If it can't be solved, it can only be sent for maintenance.

The next 360 security guard, which can be set to enable or disable startup items, and there are many other useful functions for you to try.

Just two of them.

1. ctfmon, this is the input method.

2. Your antivirus software.

Check the disk.

My Computer - Right-click on Drive D Properties - Tools - Start Check (tick the options) Check it.

First of all, your system is installed on the D drive, which is a system problem. It is likely that the system files have been compromised by a virus.

It is recommended to use the latest antivirus software in safe mode.

If you can't do it, you can only reinstall the system to solve it completely.

1. Reinstall the system.

2. Optimize your disk with Optimizer to see if there are wrong files on the disk or the track is damaged.

Press the tab key to skip a few times and it's gone.

The system is broken, it is recommended to reinstall the system.

Boot up and run msconfig, go to the boot tab, and then click on one of the xp startup items to delete! And then sure! That's it. Keep in mind that the system you're working on can't be deleted, so don't worry about deleting the wrong one. Hope it helps.