Big brothers, why can my computer only use safe mode, not normal mode 5

Fault phenomenon: The boot cannot be started normally, and it directly enters the safe mode state.

Detection: According to the fault phenomenon, the system is preliminarily judged to be damaged, and I plan to try it with the restore registry command, so, boot up, press the F8 key, hoping to enter the DOS mode through the boot menu, but something strange happened, the system did not appear as I expected the boot menu, but directly entered the gradual improvement of the boot state, that is, the gradual selection of the boot state. I thought this would work, anyway, as long as it can start normally, so I pressed"y"key, but something strange happened again"y"The key didn't respond, so I hit enter, and it still didn't respond; It's weird, it's weird, I'm pressing"esc"key, oh my god, there was a response, so I slapped the whole keyboard, and suddenly, one appeared on the screen"y"Hey, what's going on?

Is the keyboard broken, so turn on again, try again, the fault is still there, so I take a good keyboard to connect, boot, try again, wow, everything is normal, is it really the keyboard is broken, connect this indisputable keyboard to other machines, boot up, sure enough, strange things happened again, and finally judged, the keyboard is broken!!

Tried to hit each key, and found that the keyboard failure was garbled, so I analyzed. After connecting this keyboard, the system accepts the safe mode boot command from the keyboard, so it always starts the safe mode.

If you think about it carefully, it's not strange.

Isn't it okay to reinstall the system in safe mode?

If it's XP, you can go to DOS to reload.

There's a problem with the system files.

So at this time, the only way to install the system is to start from scratch.

Safe mode for your computer.

In fact, it is a thing that allows us to do something that can not be done in non-safe mode, such as poisoning can enter safe mode to delete viruses, but some friends found that the computer can only enter safe mode when booted, so that we can not use the computer normally, let me teach you the solution that the computer can only enter safe mode.

The workaround that the computer can only enter safe mode

1. When we turn on the computer, we can only enter the "safe mode", and after entering, we turn off all the computer running programs.

2. We click on "Start" on the left and then click on the "Run" option;

3. After entering the msconfig character in the run box, press enter or click OK.

4. After that, a "System Configuration Utility" will pop up, we click on the "tab", uncheck the option of safeboot, and click Confirm to close all windows after canceling.

5. After that, we will restart the computer to see if it can enter your system normally.

The computer exits safe mode

If you can't enter the system normally, then enter the safe mode first, after entering, open the "Start" menu, and then open the "Run" program.

If you don't have a program running in the start menu, you can use the win+r shortcut directly.

It can also be called out.

After opening the run window, in the box to the right of Open, enter the msconfig command to OK.

After pressing OK, a window will pop up, this is the system utility configurator window, after entering, select the option "Boot".

Once inside, select the current operating system , and under "Boot Options", see if the "Safe boot" item is ticked.

If it is ticked, remove the check of "safe boot", it is because he checks it, which will cause it to automatically enter the safe mode every time it is turned on.

Then, it's a good idea to make the system wait time (timeout) a little longer, so that the system boot options screen will appear, and you can choose which system to boot.

You can set the time to 5 seconds or more, or 30 seconds if you have a slower hand speed, so you will have plenty of time.

After the setup is complete, press "Apply" and then "OK" to exit the System Utility Configurator window.

Then open the "Start" menu, click on the "Shutdown" icon on the right side, select "Restart", after the computer restarts, you can enter the Windows system normally, and it will no longer automatically enter the safe mode.

1.The computer can only enter safe mode.

2.How to enter the computer with network security mode.

3.What problems can be solved by entering the computer into safe mode.

4.How to solve the problem that the computer cannot enter safe mode.

5.The computer can only boot in safe mode.

How should I enter the safe mode of my computer?

Is it possible that the system has not been installed and entered the safe mode, can you enter the normal mode, and the hardware is fine, and then disconnect the network cable and install the system? Try replacing all the hardware with a different computer? Did you use it normally before, and how did you install your system?

In this case, you can only install the system again, and it is best to format the hard disk according to NTFS.