What is the Wave Fork Line and what is the Wave Fork Theory in Forex?!

It is a part of the gearbox to place the shift fork, also known as the gearbox cover, if the new fork cover is of reliable quality, it is not easy to break.

The top of the gearbox has a cover that can be removed and reassembled. It's called a fork cover.

First of all, it is corrected, not the "wave" fork cover, but the "dial". It is a small cover on the top of the manual gearbox, with two shafts on it, one for gear selection, which is the amount of space when swinging the gear knob left and right with your hand. One is used to dial the gear, that is, the gear.

Under normal use, it is generally not easy to be damaged, rest assured!

No. Cross line: also known as reverse line, the line sequence is arranged according to the standard of 568A at one end and 568B at one end, and clamped with RJ45 crystal head.

The specific line sequence production method is as follows: 1, white green, 2, green, 3, white orange, 4, blue, 5, white blue, 6, orange, 7, white brown, 8, brown, that is, 568A standard.

On this basis, the other end of the eight lines of the 1 and 3 lines, 2 and 6 lines of the swap positions, then the line sequence of the network cable becomes 568b (that is, white orange, orange, white green, blue, white blue, green, white brown, brown order) to do the line standard unchanged, so that the crossing line is done -6 cross connection method. Although twisted pair has 4 pairs of 8 cores, in fact, only 4 of them are used in the network, namely the 1st, 2nd, 3rd and 6th pins of the crystal head, which play the role of receiving and sending signals respectively.

Crossover wires are generally used to connect the same devices, such as routers and routers, computers and computers; Nowadays, many of them also support straight lines, but it is recommended to use cross lines.

Twisted

PAIR, TP) is the most commonly used transmission medium in integrated wiring engineering, which is composed of two copper wires with an insulating protective layer. Two insulated copper wires are twisted together according to a certain density, and the radio waves radiated by each wire in the transmission will be canceled by the radio waves emitted by the other wire, effectively reducing the degree of signal interference.

Twisted pair wire is generally made of two 22 26 gauge insulated copper wires wound with each other, from which the name "twisted pair" comes from. In practice, twisted pair wires are made up of multiple pairs of twisted pairs wrapped together in an insulated cable sleeve. If one or more pairs of twisted pair are placed in an insulating sleeve, they become twisted pair cables.

However, in daily life, "twisted pair cable" is generally directly called "twisted pair".

As the name suggests, twisted pair is that two wires are twisted together with each other, like twist, there are 8 wires in the network cable, divided into 4 groups, all of which are twisted pairs.

Cross line and straight line refers to the connection method of network cable connector, if the line sequence on both sides is one-to-one correspondence, it is a straight line, otherwise it is a cross line, which is connected according to different needs. The line sequence upstairs friend said it, you can refer to it.

There is a foreign exchange company that fools people, which is summarized based on historical data, and has little value in future market practice.

When doing Forex, the focus is not on specific technical rules, but on trading ideas and money management (position management, risk management).

I've been doing forex for 6 years, and it's the first time I've heard of a wave fork theory, which is very fresh, ha.

Wave fork theory???

It's the wave theory.

The wave fork theory is very poorly practical.

Wave wire, also known as wave guide wire, also known as lace or edge line, etc., is mainly used around the ground or in the aisle entrance and other places. Generally, it is a decorative line made around the wall side of the block building (ground); Widths vary. Floors are built with lines that are different from the overall floor color to add to the design effect.

Which material do you choose for the ground, then your corrugated line can choose the same, so that it will look better, the effect made by the corrugated line is still very good, the corrugated line is a kind of ceramic tile products, mainly gold-plated and microcrystalline plane. The colors it uses are generally darker, and there will be more complex patterns on it.

1. ASICS

ASICS is a running shoe sports brand founded by Japanese industrialist Kihachiro Onizuka, and the brand name comes from the acronym of the Latin aphorism "Anima Sana in Corpore Sano", which means "a sound spirit in a strong body".

2. Onitsuka Tiger (onitsuka tiger).

In 1949, Mr. Kihachiro Onizuka founded Onitsuka Tiger Co., Ltd., the predecessor of ASICS, in Kobe, Japan, specializing in the development and production of professional sports shoes that meet the needs of athletes. In 1949, Mr. Onitsuka made the first pair of basketball shoes and named them onitsuka tiger.

Difference Between Asics and Onizuka Tiger:

1. Many of ASICS' products are professional, and they are also aimed at the help that shoes bring to consumer sports, so more attention is paid to its practicality. Onitsuka Tiger is practical, adding more popular elements, such as the matching of external colors, the design of the shape, etc., so that the shoes are more in line with the trend.

3. ASICS and Onitsuka Tiger are the same company, and the latter is a brand of the former, but when it is sold, it is sold separately.

There are four crossed lines on the upper: Onitsuka Tiger

Onitsuka Tiger is a Japanese sports brand founded by Kihachiro Onizuka and the predecessor of ASICS.

Both uppers have four crossed lines.

Asics, probably. Can you see the picture above?

The problem you said, I think the last few stitches of the wire loop will be twisted 1 needle bar is too low 2 hook time is too late 3 needle guard is too close to the machine needle, generally not the last Shanna fiber machine to do the needle loop will be twisted phenomenon, you should pay attention to the imitation knife in the knife when cutting the thread on the sewing board can separate the line, as well as the front and rear positions of your machine's dial fork to pay attention to.

The daily fork is a colloquial saying, which should be called the daily line (referring to the ** combination chart in a trading day) golden cross.

Golden fork is a commonly used technical term in a ** city. It means that it is a ** that has a short time ** and a little longer ** below it, and then these 2 ** directions are facing up, then this ** combination is "**Golden Cross", and vice versa is "**Death Fork".

Generally, the golden cross is a buy signal, and the death cross is a sell signal, and at the same time, it is necessary to judge whether it is a ** buy or sell or a mid-line swing band to buy and sell in combination with the combination time period of this ** system, and it is especially necessary to pay attention to the direction of the ** 2 after the cross, if it is not the same up or down, it is an ordinary ** cross, not a "golden cross" or "death fork". Reference.

It's the part of the day that changes the most, like a branch.

1, a colloquial saying in northwest Hubei Province.

2. It mainly describes a person who is very weak or not capable enough.

3. It has a certain derogatory connotation, but it is a neutral word. It is mostly used for self-deprecation. For example, I have a bit of a day fork in the car repair section.