What is the qualification of China Institute of Standardization Management?

I have been engaged in enterprise standardization work for 10 years, and the following is based on memory, you can help you verify if necessary.

It is a research institute of the National Bureau of Standardization (near Madian Bridge) and is affiliated to the State Bureau of Technical Supervision.

The office is located in the Beijing Technical Supervision Bureau (the south gate of Beihang University, opposite), which is very average in terms of professional ability.

It has business dealings with the National Bureau of Standardization and the GB Basic Standardization Committee.

Chinese National Standard Collection.

On behalf of the country, we carry out counterpart research projects with the World Organization for Standardization.

As far as the standardization profession is concerned.

In terms of machinery, you can find the Mechanical Research Institute.

It is recommended that you contact the Shanghai Institute of Standardization (a subsidiary of the Shanghai Bureau of Technical Supervision).

There are more than 100 standardization technical committees in the country, which are affiliated to different research institutes in China.

Thank you for caring about standardization.

Quality is the life of an enterprise and the blood of standard life.

Hehe! People are old.

I don't see clearly that there is also "management".

Non-standard organization!!

Relatives of retirees of China Standardization Herald...

I set up a company, and it's still called "Hong Kong Weibiao".

Peers compete for hard-earned money and have limited support.

The China National Institute of Standardization is a public institution directly under the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, and is the only national social welfare scientific research institution engaged in standardization research in China.

Some of the Hong Kong registered or privately engraved official seals are even more directly online to make a chapter engraving fees are saved, under the guise of standardized training, publicity, certification and other fraudulent institutions to go, temporarily list a few of the people you know Please note that the email has been sent to the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, China Institute of Standardization, it is reported that the public procuratorate, law, industry and commerce and other departments are cracking down on these units, and many people have been arrested recently.

China Institute of Standardization Management, registered in Hong Kong.

The China Institute of Standardization Technology is estimated to be also registered in Hong Kong.

China Institute of Standardization Testing and Testing.

China Society for Standardization Technology.

China Standardization Technology Training Center.

China Association for Standardization Education.

China Engineering Construction Standardization Institute (formally China Engineering Construction Standardization Association, China Building Standard Design and Research Institute).

In short, only the China Institute of Standardization is a first-class institution that can be responsible for the scientific research work of national standards, and other non-governmental organizations similar to training institutions are not even anything.

The answer is not what was asked

People are asking about the qualifications of the China Institute of Standardization Management, and the qualifications of the China Institute of Standardization Can these two units be the same Two words are far from the same One is a national unit The other is a unit registered in Hong Kong How can China's ** unit be registered in Hong Kong It's really Li Ghost pretending to be Li Kui There are too many such phenomena in society, so you have to pay attention to it

It is understood that this unit is registered in Hong Kong, not a Chinese administrative institution, and it is likely to be a ** unit Hahahaha Pay attention to the specific situation to understand in depth

Recently, the China Institute of Standardization has received inquiries from relevant units and individuals to verify the information ("false information") of issuing notices of seminars, trainings and other activities under a similar name to our institute, such as the name of "China Institute of Standardization Management", etc., which has had a very bad impact on the reputation of our institute and caused trouble to relevant units and individuals. In view of this, while our court reserves the right to pursue the legal responsibility of relevant personnel, we hereby issue the following statement.

They are specialized in standard and standardized training, which is a relatively professional in this industry, and they have done internal training for our company. The teacher is very professional and an old expert.

I have participated in the training course held by the China Institute of Standardization Management, the training effect is very good, there are many units to participate, the teacher is very good, the interaction is very strong, and the benefits are very shallow.

Yongfeng I found you fucking with! Eh, there are really a lot of self-questions and answers these years, and it's not easy to slander others. I'll tell you, what I hate the most is this, like when I graduated, damn, said that the school was not good, that was not good, what kind of miscellaneous brand, private, all fucking fart, my school is the top famous Inner Mongolia Electronic Information Vocational and Technical College Seeing that you are old enough to cut off on the Internet, you have no quality children.

Damn, you didn't write all the bad things about my alma mater. I am currently working at the Department of Education of Inner Mongolia. You're coming to me!

Its main responsibility is to study the national economy.

and the overall, strategic and comprehensive standardization issues in social development, responsible for the development of comprehensive basic standards, and the provision of authoritative standard information services. China National Institute of Standardization.

It will provide multi-faceted standard support for China's economic development and social progress, and promote China's technological progress and industrial upgrading.

Improve product quality and provide important support, and provide a scientific basis for standardized decision-making.

The Institute of Standardization is a public institution directly under the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, and a national social welfare category engaged in standardization research in China.

Scientific research institutions. <>

Founded in 1963, the China Institute of Standardization (originally known as the Institute of Standardization of the State Science and Technology Commission) is a state-level social welfare scientific research institution directly under the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China and engaged in standardization research, mainly focusing on the overall, strategic and comprehensive standardization issues in China's national economic and social development.

The China National Institute of Standardization (CIIA) is a state-level social welfare scientific research institution directly under the State Administration of Quality Supervision, Inspection, Inspection, and Epidemic, and is engaged in standardization research, mainly focusing on the overall, strategic and comprehensive standardization issues in China's national economic and social development.

The China Institute of Standardization mainly conducts research on standardization development strategy, basic theory, principle method and standard system.

According to the official website of the China National Institute of Standardization in November 2017, the institute has 2 branches, 9 research institutes (centers), laboratories (centers), national standards halls, standard evaluation departments, and 2 independent legal entities; There are more than 500 employees, including more than 200 researchers with senior professional titles and more than 80 doctors and postdoctoral fellows.

The China National Institute of Standardization is a public institution directly under the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, and a national social welfare scientific research institution engaged in standardization research in China. Its main responsibilities are to study the overall, strategic and comprehensive standardization issues in the national economic and social development, and is responsible for the development of comprehensive basic standards and the provision of authoritative standard information services. The China Institute of Standardization is a state-level social welfare scientific research institution directly under the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, engaged in standardization research, mainly focusing on the overall, strategic and comprehensive standardization issues in China's national economic and social development.

The China Institute of Standardization mainly conducts research on standardization development strategy, basic theory, principle and method, and standard system. According to the official website of the China National Institute of Standardization in November 2017, the institute has 2 branches, 9 research institutes (centers), laboratories (centers), national standards halls, standard evaluation departments, and 2 independent legal entities; There are more than 500 employees, including more than 200 researchers with senior professional titles and more than 80 doctors and postdoctoral fellows.

Does the Standardization Administration of China have the authority to certify qualifications? The issue of applying for qualification according to various standardsWe start from the group standard and analyze a series of issues in applying for CMA and CNAS accreditation. 1 Group standard application for accreditation qualificationThere are three situations for group standard application for accreditation qualification:

a) The group standards (method standards) published in the "National Group Standards Information Platform" of the Standardization Administration of the People's Republic of China shall be recognized according to the standard methods, that is, only the evidence of method verification provided by the laboratory needs to be reviewed. b) The group standard (Fangtan Combustion Delay Method) that has not been published on the "National Group Standard Information Platform" of the Standardization Administration of the People's Republic of China shall be recognized according to the non-standard method, that is, the evidence of method confirmation provided by the laboratory needs to be reviewed during the review. c) Group standards (product standards) that do not involve testing methods are not recognized.

2. Application for accreditation qualification of enterprise standards The accreditation qualifications of enterprise standards and group standards shall be handled according to the following methods: the testing method standards in the enterprise standards shall be recognized in accordance with the non-standard methods. If the enterprise standard applied for accreditation is not formulated by the applicant institution independently, it needs to be authorized in writing by the enterprise standard setting agency.

If the enterprise method standard has become a recognized method, it will be recognized as a standard method. 3 The methods used by standard methods and non-standard methods can be divided into the following three categories: a) standard methods can be directly selected after validation; b) Methods published by reputed technical organizations, which, if recognized, can be used directly after validation; c) Non-standard methods such as methods developed by laboratories, standard methods used beyond the predetermined range, or other modified standard methods, methods published in relevant scientific literature or journals, or methods prescribed by equipment manufacturers, etc., must be confirmed before they can be used.

The on-site review team must review the project parameters of each site for accreditation one by one, and the project parameters that have not been verified by standard methods or non-standard methods, such as those who have no experience in testing and calibration, have not evaluated and confirmed the accuracy and reliability of the test and calibration results, or have not implemented quality control. When conducting on-site review of non-standard methods, the review team should verify the method confirmation data, verify the authenticity and accuracy of the data, and analyze the technical reliability of the non-standard methods.

With the exception of the first one, the other two are counterfeits.

China standardized pipe comes.

Institute of Science, referred to as "China.

Self-standard research", abbreviated as "cnsai" in English, is approved by the People's Republic of China and the Hong Kong Special Administrative Region**.

The non-profit social organizations that are quasi-established by DAO are composed of organizations and individuals engaged in standardization work at home and abroad with the voluntary participation.

1. China National Institute of Standardization is a public institution directly under the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, and a state-level social welfare scientific research institution engaged in standardization research in China.

2. The China Institute of Standardization Technology is an unidentified organization, and it is unknown whether it is registered in Hong Kong because there is no such social group in the inquiry of the State Administration of Non-governmental Organizations. In short, only the China Institute of Standardization is a first-class institution that can be responsible for the scientific research work of national standards, and the other two should be just non-governmental organizations similar to training institutions, or even nothing.

The China Institute of Standardization Technology is an illegal registration institution, so beware of being deceived.

No way! The last time our unit participated in the training held by the China Institute of Standardization Technology in Jinan, the effect was very good, and the teachers were all standard drafters.

I would also like to complain to the China Academy of Standardization Management. I don't complain much about it.

There is a China Institute of Standardization in Beijing, but it is not the China Institute of Standardization Technology, and the China Institute of Standardization is a public institution under the China General Administration of Quality Supervision.

1.Carry out international exchanges and cooperation. Actively participate in the activities of relevant international standardization organizations, undertake the development of relevant international standards, and related technical support and management.

2.Establish a national standard literature information service network. Collect domestic and foreign standard information materials, carry out analysis and research, develop standard information resources, and provide standard information consulting services.

3.Perform the duties of technical review of national standards. Carry out industry standards and local standards review and filing; management of national standard archives and databases; Carry out national standard publicity and training activities.

4.Undertake the secretariat work of some national professional standardization technical committees and sub-technical committees.

5.Authorized by the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, it undertakes the relevant work of the National Industrial Product Production License Review Office.

6.Entrusted by the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, it undertakes the daily work of national defective product management.

7. Authorized by ***, manage the work of the national organization and promote the application of *** information.

8.Authorized by the first to manage the national commodity bar code work, to promote the application of bar code technology.

9.Carry out energy-saving, water-saving, environmental protection product certification and CCC certification.