Please understand the construction guidance

You don't always have to use everything you learn in school, so you don't have to get angry. When you arrive at the construction site tomorrow, you will first familiarize yourself with the drawings, and then you will bring a small book by yourself, and write down all the things that you can't know, you can't learn nothing in school, more or less you can turn the book yourself, and there are also things that can be solved, and you will ask the master for the rest. Don't care about face, say that college students can't do anything, it's okay, and now the people on the construction site also understand that college students can't learn a lot of practical experience in school.

So you must not pretend to understand if you don't know how to do it, in that case it will be annoying.

Tomorrow you go to the construction site early, remember to be diligent, it doesn't matter, but don't be lazy, remember everything you don't understand, and then don't ask too much a day, ask a few things a day. The rest of the matter is to go home and summarize it yourself and see if you can solve it yourself. When you have nothing to do, ask the master to arrange something for you, that is, to run errands and do miscellaneous things, such as where the master wants to go to see the progress, you just say:

I'll go for it". When you come back, just describe the appearance of the construction site to the master, and that's it. It's a small thing, but you'll be able to see the problem yourself over time.

You must be familiar with the construction drawings, be familiar with the whole site, and then you will know what you are going to ask. Don't: walk more, see more, ask more, and don't express your opinion when you don't have 100% understanding and affirmation of things.

Go with confidence. It's shameless to treat it as shameless, just ask if you don't understand. If you don't understand anything, ask anything, everyone has to go through this time.

I was good at university, but I was also enlightened when I went to the construction site. Take your time, and the most important thing is to pay attention to safety. If you want to be alone, it depends on what you do, being a construction worker is very fast, if you are attentive, a project can be, if you want to be alone.

It's hard to say, then there are a lot of comprehensive factors, not only do you have to know how to organize the construction reasonably, when to do what, when to go to the next process, when to tell the boss to feed, tell the boss how much you can earn by taking a job, and how much money can be received at the minimum (a wide range of estimates), if you are attentive, the fastest 3 to 5 years will be the fastest. I wish you success and take charge of yourself soon.

To sum up, it is more !!

When you get to the construction site, don't jump to conclusions, the problems you find may be caused by many aspects, look at the drawings, and then go to the site to see the real thing, and then look at the drawings, you will find the difference.

First of all, understand the construction sequence, a sub-project, which step of the process to start first, what is next, what finished product can be made in the end, use your brain to think, you can't figure it out and then ask, slowly, see more, you know, the construction industry is a cumulative industry, especially construction...

By the way, you must learn to check the information, you have to master, the atlas number given on the drawings, the detailed drawing number, and the engineering practice can be found from **, which is very important, I hope you will be independent as soon as possible.

From the most basic semester, learn from the master every day, record the relevant construction methods that you see and hear every day, understand what's going on, understand how proficient you are, and ask the teacher if you don't understand (it depends on your way of doing things) In addition, look at the construction specifications more in the rest of the time, and the drawings should be read repeatedly, especially the explanation is very important, step by step, don't worry! Good luck!

You have to see what the construction site is, whether it is civil engineering or decoration or something, look for books related to these in advance, it is normal to not know at first, not afraid that you will not be afraid that you will not learn!! A little bit of eye energy, make notes!! It will be very good for you, and if you accumulate it slowly, you will find that the construction is actually not very difficult.

The master doesn't teach you like a teacher, only you are diligent and polite, think about it yourself!!

Is it a trivial matter, I am a girl who is not as good as you when I just graduated, I just arrived at the scene and didn't know what to ask, I naturally knew what to learn after a period of contact, what was important, what I didn't understand, it was best to start with the line, don't be so nervous, relax and greet it, but don't ask when the time comes.

Since I am studying architecture, as long as I study in school, I don't play, and I can achieve something by mixing on the construction site for half a year.

Hurry up and read the book today, the neighbor grinds the gun, and the light is not fast.

<> 1. Do a good job in technical training.

Before the start of the sub-project, the construction plan preparer shall make a safety technical disclosure to the project management personnel, subcontractors and operation teams, so that the construction technicians can understand the characteristics of the project, the design intent, the technical requirements, the construction technology, and clarify the specific work content of the sub-project to be completed and the problems that need to be paid attention to in the process of construction travel.

In addition, the technical disclosure work should cover all departments and all personnel of the team, and construction operations shall not be carried out without safety technical disclosure.

2. Timely inspection of project quality.

During the construction process, the quality of materials should be strictly controlled, and the entry of "no guarantee, no certificate, and no inspection standards" should be eliminated; At the same time, we should also adhere to the quality inspection and acceptance system within the enterprise and the quality "three inspections" system, that is, self-inspection, special inspection, and mutual inspection, so as to strengthen quality tracking and inspection, and focus on quality control.

Whether it is the performance test of construction materials with Zhensui before construction, or the construction effect test after construction, engineering testing should be carried out strictly in accordance with the requirements, such as pile quality inspection, steel engineering self-inspection, concrete durability testing, formwork quality inspection, etc., so as to effectively ensure the construction quality of the entire project.

3. Adhere to the principle of model guidance.

Before construction, the demonstration model of each sub-project or type of work should be done in advance, that is, according to the project situation, the detailed list of the model needs to be made first, and then the detailed model guide plan should be formulated according to the relevant specifications and standards of the design drawings and the atlas, such as the size of the template, the elevation control, the cleaning in the template, the strength, stiffness and stability of the template, etc., must be listed in detail in the model list, in order to unify the operation requirements, ensure the accuracy of the follow-up construction, and provide on-site quality acceptance. The unified judgment standard provided by the quality inspection can effectively improve the overall project quality.

1. Generally, 6-storey buildings are low-rise and will not be guarded; The design is different in different regions, and the bottom plate design is also in the thickness of 150-200mm, but there must be a waterproof basement, which is really difficult to make up if it is damaged.

2. Most of the water supply and drainage pipes in the basement are not laid darkly, you can see it, but if there are switches and sockets in the basement, you need to pay attention to the fact that it is generally laid along the distribution box, and the pipelines of the lamps and lanterns are generally on the roof of the basement, and it will be fine.

3. If you really want to open a hole, first of all, you'd better find the property and get the as-built drawings to see; Second, you find a professional measurement company to check the pipeline, they have instruments that can measure it, but the cost is relatively high.

The thickness of the concrete is generally 180mm, and there must be pipes under the basement, and the specific burial depth depends on how it was designed at that time.

It depends on the design resistance level of the civil air defense basement, and the minimum thickness is generally 25 cm.

It shouldn't be laid or anything.

Don't just break the ground, be careful if you dig up the pipe or fiber optic cable, you will lose a lot.

In this case, it is not allowed to excavate without permission, and the basement is made with a waterproof layer.

Calculate the elevation of the site first to obtain the earthwork balance:

The elevation of the first point after balance shall prevail, and the elevation of the second and fourth points shall be calculated according to the slope; The elevation of point 5 is higher than. If there is no method of dividing the question, it will be rounded.

Answer: 1 point elevation; The elevation of points 2 and 4 is; The elevation of point 5 is. Answered.