The Transit V348 engine is always stalled at idle, and it is all together, and there is no problem w

1. New Transit.

92kW (turbocharged.

Motor.

2. Transit: 68kw (turbocharged) engine.

The maximum torque is different.

1. New Transit: Maximum torque (Nm rpm) 350 1500-2000.

2. Transit: maximum torque (Nm rpm) 320 1500-2000.

Notes: 1) "Vehicle" refers to motor vehicles and non-motor vehicles.

2) "Motor vehicle" refers to a wheeled vehicle that is driven or towed by a power unit and driven on the road for personnel or for transporting goods and carrying out special engineering operations.

3) "Non-motorized vehicle" refers to a vehicle driven by human or animal power on the road.

and motorized wheelchairs and electric bicycles for the disabled that are driven by power units but are designed to meet the relevant national standards in terms of maximum speed, empty mass and dimensions.

and other means of transportation.

The V348 engine compartment fuse box has a square four-claw relay, (unplugging the car can't hit the car) I don't know what it is, pry it open, and use a fine abrasive cloth to contact a sand, (I changed the filter element, lifted the fuel tank, and the oil head has tried) The reason is that the car suddenly stalled after idling for twenty or thirty seconds. It's normal to refuel and run the car.

The inlet pipe is worn above the oil pump, causing an air leak.

Metering unit on the oil change pump.

Master, has your car been repaired? Is there something wrong?

My car is also problematic.

Is it fixed?

Idle shake is generally more obvious when the car is cold, if the car disappears after the hot car, then there is no problem, generally the lubrication is not enough, of course, there may be problems with the idle motor, there is too much carbon deposit, the throttle spark plug needs to be cleaned.

This is a lot of carbon deposits, the throttle is dirty, clean the carbon deposits in the inlet tract, and clean the throttle.

Ford Transit V348 engine idle shake, engine idle shake causes generally have several situations, the most common cause of serious engine carbon deposition caused by car shake, is that the throttle valve is too dirty or the fuel injector is too much carbon deposit, because after the car adsorbed on the carbon gasoline is sucked into the cylinder by the engine for combustion, the combustible mixture of the engine is dilute and thick, resulting in idle shake after cold start. Solution: The company has a general idle shake fuel additive to clean the oil circuit, and check whether the idle motor has carbon deposits and should be cleaned.

Reasons for the engine failure light: 1. The sensor is damaged, the contact is poor or the signal is interrupted; 2. Poor engine maintenance; 3. The quality of fuel and oil is not good; 4. The combustion of the mixture is insufficient; 5. Spark plug failure, ignition coil failure; 6. The fuel pump is faulty and the oil circuit is blocked; 7. The air conditioner filter is blocked.

1. Sensor problems; The sensor package covered here includes water temperature, crankshaft position, air flow, intake air temperature, oxygen sensor, etc., when these sensors are damaged, poor contact or signal interruption, the ECU of the car can not accurately obtain engine data, and then the engine fault light will be on. 2. Maintenance problems; Poor engine maintenance is the most common cause of engine failure to light up. We know that the vehicle has a certain maintenance cycle, if the owner does not maintain on time, coupled with bad driving habits, then it will increase the burden of engine operation, and finally can only remind you through the fault light to care about your car 3, oil quality problems; The oil quality here includes fuel and engine oil, we know that the fuel filled by the car is generally marked, and the engine oil is also semi-synthetic and fully synthetic, the manufacturer will generally recommend the owner to use which grade of fuel, which type of engine oil, if the owner does not add as required, it will cause wear and tear of the engine in the long run, and the fault light is not to blame.

Poor combustion of the mixture; The failure of the spark plug, ignition coil, fuel pump, and oil circuit blockage of the engine will cause poor combustion of the engine mixture. Poor combustion of the mixture is caused by the problem of engine carbon deposition or knocking, and these will eventually be detected by the engine's oxygen sensor and reported to the ECU, which will naturally turn on the fault light to warn of the intake air intake problem; When the engine burns, it needs to take intake, the air filter element is very important in this process, if the air filter element of the car is not clean, it will affect the air intake of the car if it is not cleaned regularly, and it will be blocked for a long time, and if it is serious, it will cause the engine failure light to turn on. pressurization issues; Intake booster lines and turbochargers can also cause engine failure lights to illuminate.

The most common of these is turbocharger damage, while the vehicle can also experience symptoms such as oil leakage, high oil consumption, loss of power, metal noise, and blue or black smoke from the exhaust pipe. 7. Exhaust problems; Rear oxygen sensor, three-way catalytic converter, exhaust camshaft and bearing. One of the most common is the failure of the three-way catalytic converter that causes the engine to malfunction and the light to light up.

The use of leaded gasoline, the use of leaded or silicone lubricant additives, the bump of the three-way catalytic converter, and the failure of the engine oil supply system are some of the factors that can easily cause the failure of the three-way catalytic converter. anti-theft system; If the car's electronic immobilizer fails, or if the immobilizer does not match the engine electronic controller, the immobilizer system will also cause the engine to not work properly and the engine fault light will be lit at the same time.

Summary. Hello, glad to answer for you

According to the situation you described, the V348 engine of the new generation car of Transit, the displacement can not be added to the oil for the following reasons and solutions:

1. First of all, you need to check the oil pump of the oil tank to see if it is working properly. This requires removing the rear seat, opening the fuel tank, and taking the oil pump out for inspection. It will be caused by too many impurities in the oil pump and the oil cannot be absorbed!

2. Secondly, you need to check whether the gasoline grid is working properly. If the gasoline grid does not work, it will also cause the oil to not be filled!

3. Moreover, the air intake system is blocked, such as the air filter. Check the air intake system and have it professionally repaired!

4. Finally, see if it is a battery problem! Insufficient battery power may cause the voltage output to be unstable. The solution is to clean the battery frequently and replenish the electrolyte!

Hold on. Hello, I'm glad to answer for you According to the situation you described, the V348 engine of the new generation car of Transit, the displacement can not be added to the oil for the following reasons and solutions: 1. First of all, you need to check the oil pump of the fuel tank to see if it is working properly.

This requires removing the rear seat, opening the fuel tank, and taking the oil pump out for inspection. It will be caused by too many impurities in the oil pump and the oil absorption is not on the top! 2. Secondly, you need to check whether the gasoline grid is working properly.

If the gasoline grid does not work, it will also cause the oil to not be filled! 3. Moreover, the air intake system is blocked, such as the air filter. Check the air intake system and have it professionally repaired!

4. Finally, see if it is a battery problem! Insufficient battery power may cause the voltage output to be unstable. The solution is to clean the battery frequently and replenish the electrolyte crack!

Summary. Hello dear, the main reason for the car to idle and shake off is that the fuel is not burned well, which leads to the failure of the spark plug and causes the ignition energy to be insufficient and causes the jitter.

The reasons for idling car shake are:

1. The throttle is too dirty or the fuel injector has too much carbon deposit;

2. Ignition system problems, ignition system, spark plug poor working condition;

3. The oil pressure is unstable, the oil supply pressure of the oil pump is abnormal or the value of the inlet pressure sensor is wrong and the work is poor;

4. Aging of engine parts.

Transit V348 idling jitter stalls.

Hello, the main reason for the idling and shaking of the car is that the fuel is not burned well, which leads to the failure of the spark plug and causes the lack of ignition energy of the group section to cause shaking. The reasons for idling and shaking are: 1. The throttle is too dirty or the fuel injector has too much carbon; 2. Ignition system problems, ignition system, spark plug poor working condition is not good; 3. The oil pressure is unstable, the oil supply pressure of the oil pump is abnormal or the value of the inlet pressure sensor is misignited and the work is poor; 4. Aging of engine parts.

Pro, the solution to idle jitter is the Nali State method: 1. Clean the oil circuit and check whether the idle motor has carbon deposits; 2. Check whether the spark plug hole is rotten, judge too much carbon, and replace the spark plug; 3. Check the oil pressure and replace the parts if necessary.

Diesel. Pro, clean the oil circuit, engine carbon deposit. Check the oil pump.

There are no glitches. There are no glitches.

Pro, check the air flow meter.

This failure does not affect.

This failure does not affect.

Dear, huh. There are no other faults, and the ignition is turned off at idle.

Dear, it's the air flow meter that has a problem.

Summary. Hello, the idle stall is generally caused by the following situations: 1. After the engine starts, it runs well from low speed to high speed, but when the accelerator pedal is released, it turns off immediately, or it runs unstable first, and turns off from the cause; 2. When the engine is idling, the operation is not stable, and the exhaust pipe makes a "purring, purring" sound, which is generally unstable at idling, resulting in idle stalling faults; 3. When the engine is idling, the speed is higher than the normal range, and it cannot be adjusted to reduce it, which is the fault of too high idle speed, resulting in stalling.

The Transit V348 engine is idle and stalled, and it is on the same page, and there is no problem with the sports car.

Hello, the idle stall is generally caused by the following situations: 1. After the engine starts, it runs well from low speed to high speed, but when the accelerator pedal is released, it will turn off immediately, or the operation will not be rough and stable, and the ignition will be extinguished from the cause; 2. When the engine is idling, the operation is not stable, and the exhaust pipe makes a "purring, purring" sound, which is generally unstable at idling, resulting in idle stalling failure; 3. When the engine is idling, the speed is higher than the normal range, and it cannot be adjusted to reduce it, which is the fault of too high idle speed, resulting in stalling.

Ask me if sometimes there is a lot of jitter, is it a fault with the line?

Is it the oil pump, or the fuse.

Hello, open the song, the engine high-voltage line is short-circuited, resulting in excessive consumption of the second spark plug, the guide is filial piety Zheng Zhisan, the abnormal water temperature leads to the low viscosity of the Shenmin oil, and the lubrication is poor, fourth, the carbon deposit valve, the throttle intake hole These parts are easy to deposit carbon, resulting in engine shaking. Fifth, lack of cylinder.

Diesel rock car, no spark plug, the car inspection computer shows that the value of the fourth cylinder is abnormal, is the voltage of the oil pump unstable, refueling and driving are good, to the traffic light, the throttle is loose, sometimes good, sometimes the speed is cautious and unstable, and the rough bridge can be opened again, it is a new era transit, v348,2,4.

Hello dear, it is also possible.

Hello, what's wrong.

I've been going to be for months, and the head of the repair shop said that changing the oil pump doesn't necessarily work.

Hello dear, check the line first to see if there is any problem.

Hello dear, first rule out other factors.

Hello, the oil pump is not so easy to break, under normal circumstances, if the oil pump is broken, it is caused by the poor quality of the oil.

Summary. Idling out is generally caused by the following conditions:

1. After the engine starts, it runs well from low speed to high speed, but when the accelerator pedal is released, it will turn off immediately, or it will run unstable first, and the engine will be extinguished from the cause;

2. When the engine is idling, the operation is not stable, and the exhaust pipe makes a "purring, purring" sound, which is generally unstable at idling, resulting in idle stalling faults;

3. When the engine is idling, the speed is higher than the normal range, and it cannot be adjusted to reduce it, which is the fault of too high idle speed, resulting in stalling.

What is the fault of the idle stall of the Transit new era engine.

Hello! I am your automotive consultant, a special guest teacher, and the cumulative service has exceeded 10,000 people.

I've seen your problem, I'm sorting out the material for you, it will take a little time to type, please wait. 

Idle stalling generally occurs due to the following situations: 1. After the engine starts, it runs well from low speed to high speed, but when the accelerator pedal is released, it will turn off immediately, or it will run unstable first, and the engine will be extinguished from the cause; 2. When the engine is idling, the operation is not stable, and the exhaust pipe makes a "purring, purring" sound, which is generally the unstable idling of the Huai code, resulting in the failure of idle shutdown; 3. When the engine is idling, the speed is higher than the normal range of lead, and it cannot be reduced by adjustment, which is the fault of too high idle speed, resulting in stalling.

Is there anything else you would like to consult? If you don't have any words or words, please give me a thumbs up. You can also follow me when you start a group. If you have anything to consult in the future, you can feel free to consult me. I wish you a happy life, thank you.

May I ask the Transit Xinshihua V348 cold start, and then the fire will stop after a while, and it will be difficult to start, what is the reason?

Hello! The V348 turns off after a short period of cold start, which may be caused by a variety of reasons. Here are the possible causes and workarounds:

1.The battery is low or aged. If your battery is undercharged or severely deteriorated, it will cause the car to not provide enough current and energy to crack during cold start, making the engine unable to start or stalling soon after starting.

The solution is to replace the battery with a new one. 2.Problems with the ignition system.

If there is a problem with the ignition system, such as damage or aging of the ignition coil or spark plug, it may cause the engine to fail to start or stall after starting. The solution is to check and replace the faulty ignition element. 3.

The fuel system is a stupid question. For example, a clogged fuel filter or a faulty fuel pump can cause the engine to not get enough fuel to start or stall after starting. The solution is to replace the faulty fuel filter or fuel pump.

4.Air source rental filter problem. If the air filter is clogged or needs to be replaced, the engine will not get enough oxygen and will affect the start.

The solution is to replace it with a new air filter. In general, when the above problems occur, it is recommended to go to a regular car service center for professional inspection and repair in time.