How to clean anti static clean clothes What are the precautions for cleaning anti static clothes?

1) The newly sewn clean work clothes can be washed directly, and the ** worn clean work clothes found oil stains, the oil stains should be carefully removed before the washing procedure.

2) Before washing, the scratched, damaged and buckles and other accessories should be inspected, and the defective ones should be repaired, replaced or scrapped.

3) It must be washed, dried, and packed in a clean room with a higher degree of cleanliness than the clean room where work clothes are used.

4) The water used for wet and dry cleaning should be filtered, and the solvent should be distilled and then filtered more than once as needed with a filter membrane smaller than the pore size at the point of use.

5) In order to remove water-soluble pollutants, wash with clean water, and then perform a final wash with distilled solvent to remove oily pollutants. Ant anti-static** answers for you.

If you want to be anti-static, you can buy that kind of fabric softener online or in the supermarket, which can be anti-static and smooth after washing, and it is also very comfortable to wear.

There are many things to pay attention to when cleaning anti-static clothing:

1) The newly produced anti-static coveralls need to be cleaned before they can be worn, because the anti-static suits are produced in an ordinary environment, and if you want to meet the requirements of 10,000, 1,000 and 100 clean rooms, you need to clean them first.

2) Anti-static clothing needs to be dust-free at a higher level.

Indoor cleaning, for example, anti-static clothing that needs to be used in the 1000-level workshop should be cleaned in the 100-level workshop.

3) Before cleaning the anti-static coveralls, you need to check whether there is any damage, if there is damage, it needs to be repaired, and if it cannot be repaired, it will be scrapped directly, and it must not be used again in production.

4) In order to remove water-soluble contaminants, the anti-static suit needs to be distilled water.

Do the final cleaning.

5) According to the different fabrics, choose the appropriate water temperature for cleaning, generally the water temperature is between 50-70.

6) For anti-static clothing with buckles, wash them with buckles attached.

7) When rinsing, you can use electrostatic solvents to improve the antistatic properties of antistatic clothing.

8) The solvent should also be filtered with a small fish pore size filter membrane after distillation.

9) In the clean workshop for cleaning.

Dry the washed anti-static clothing, put it into a clean polyester bag or nylon bag, and vacuum package it, so as to ensure that the anti-static clothing is not polluted by the outside air and maintains cleanliness.

Hello, the cleaning of anti-static overalls needs to pay attention to the following points:

First of all, it is necessary to ensure that special anti-static cleaning equipment is used when cleaning, not ordinary washing machines.

On the premise of ensuring the quality of washing, the washing environment also has strict requirements, and work must be carried out in a clean room that meets the quantitative standards of cleanliness.

Anti-static workwear must use special ultrapure water when cleaning, and the purity of ordinary industrial water cannot meet the requirements, so it is not.

When cleaning, it is not suitable to use excessive acid or alkaline laundry detergent, but should use a relatively neutral concentration of washing liquid, because it is considered to fully ensure the service life of anti-static workwear. Generally, it is not advisable to clean in excess or mixture, and should be classified, after all, anti-static workwear is still very widely used.

1. The newly sewn anti-static overalls can be washed directly, and the anti-static overalls worn by ** should be carefully removed before the washing procedure is carried out.

2. Before washing anti-static work clothes, check the scratched, damaged and buckles and other accessories, and repair, replace or scrap the defective ones. Work clothes with buckles should be washed in the buckled state.

3. When washing, the water temperature should be below 30, add 1 gram of neutral soap or enzyme-free detergent per kilogram of clothing, and the liquor ratio should not be greater than 1:40.

4. When rinsing through water, an antistatic agent can be used to improve the antistatic properties, but the selected antistatic agent should be well combined with the fiber and no dust will fall off.

5. After washing, it needs to be dried in the sun, or ironed at a high temperature of 150 for 2 minutes after natural drying, or it can be used for more than 4 minutes at 150 drying.

6. Dry and ventilated storage to avoid mechanical or chemical damage.

1. Pour half a cup of white vinegar when washing clothes in the washing machine, which can well prevent the generation of static electricity.

2. Use some special anti-static sprays, which can help eliminate static electricity on clothes.

3. Some detergents have their own anti-static function, so pay attention to the selection when purchasing.

4. For some clothes that are particularly dry and cause static electricity to gather, you can spray some distilled water to reduce the impact of static electricity.

5. Natural drying can be considered, and static electricity is often generated when using a dryer for drying, because static electricity is only generated when drying.

6. Generally, synthetic fibers are more likely to produce static electricity than natural fibers.

7. Reducing the drying time of clothes can also reduce the generation of static electricity.

8. You can consider putting a few drying balls when drying, since they will absorb static electricity, there will be no static electricity on the clothes.

1. The material of anti-static clothing is special, you can choose to wash with full-effect laundry detergent or anti-static special laundry detergent, when there are local stains: when the clothes are dry, apply the original liquid of full-effect laundry detergent to the stains, completely cover the stains, and let it stand for 5 minutes (you can gently scrub it), add full-effect laundry detergent for regular washing.