What to do with a Jaquet Droz watch running fast?

Hello, if the time is not accurate, it may be that the watch is magnetized and needs to be demagnetized.

Or it is not enough power and needs to be wound Hit or hit: The watch is very tight, if it is hit or hit, it may cause loose damage to the internal parts, and it may also cause time problems.

Need for maintenance: The lack of oil or the wear and aging of the internal parts of the movement may cause time problems, which need to be serviced and sent to a designated repair point for maintenance services.

According to the technician of the customer service center of Ruijiang Famous Watch, the most common reason why the Jaquet Droz watch is fast is that the watch is magnetized, you can go to the Jaquet Droz watch repair center for free demagnetization, or try the following methods:

1.The demagnetization of a watch theoretically places the watch in a strong alternating magnetic field, and the intensity also decays gradually. Usually, a large hollow coil is used, an alternating current is applied, the watch is placed in the hollow coil, and then slowly withdrawn, which is equivalent to gradually reducing the strength of the magnetic field.

This action has to be repeated many times, and each time the watch must be changed by 90 degrees, because the demagnetization effect is best when the magnetic field lines of the demagnetized magnetic field and the magnetic field lines of the demagnetized watch are in the same direction, and when they are at an angle of 90 degrees, they are invalid. Therefore, it is necessary to demagnetize the watch in all directions before it can be cleaned.

2.The professional demagnetization equipment uses a C-type silicon steel core with two sets of coils to discharge with a large capacitor to produce an alternating magnetic field with attenuation. The watch is placed in the groove of the demagnetizer, press the button, the neon lamp flashes to complete the demagnetization instantly, of course, the watch also needs to change several directions and repeat the demagnetization process.

3.To demagnetize the watch in a simple way, it is to find a transformer (the power should be sufficient) or something, and it is also to gradually move the watch closer to their core, and then gradually leave; Change the angle or the direction of the watch and repeat this action constantly, but this method does not guarantee that the watch will be demagnetized. Demagnetization should also be a necessary procedure for watch maintenance, and the accuracy of the watch should be corrected after it is completely demagnetized.

There is no place to repair watches in Xicheng District, and there is a place to repair watches on the 11th floor of Block D, Central World Trade Center, No. 6 Jianguomenwai Street, Chaoyang District.

There are two situations in which the watch is not allowed.

If it's just a little fast, for example, it's only more than ten or twenty seconds a day, then the gossamer circle is a little shorter, and this situation is okay.

If you know a little bit about the watch, you can adjust it yourself, if you don't understand, you have to find a watch repairer.

1. If your watch is getting slower and slower within a year of buying it, it may be that the watch has been in contact with magnetic items, and you can bury it in the repair center to demagnetize, and then please avoid the contact between the watch and magnetic items. It could also be that the oil has not been washed for a long time, or the gears may be misaligned due to vibration.

2. Lack of maintenance: mechanical watches are maintained every 2-3 years, and quartz watches are maintained every 4-5 years. The watch maintenance should completely disassemble, clean, oil, reassemble, adjust, and check the function of the movement; Repair or replace any worn or malfunctioning movement components.

If the watch lacks maintenance, it will lead to the wear and tear of the parts, the sludge will dry up, affect the normal running time of the watch, and make the watch appear fast and slow. Regular maintenance of the whole machine can effectively prevent the occurrence of various failures of the watch.

3. Mechanical failure: Mechanical failures such as watch hairspring failures, escapement system failures, and parts and components may cause the watch to appear fast and slow, so when the watch is abnormal, you can first pull out the crown and take it to a professional maintenance organization for the maintenance technician to check the reason.

4. The mechanical watch may be fast and slow, which may be caused by severe impact, water ingress and other reasons.

The main reasons why the watch does not go are: the movement gear is misaligned, the watch is magnetized, bumps, and the oil sludge is dried for a long time when it is left on hold. The most common reason for the failure of the watch not going is the lack of power of the watch and the movement of the watch does not work.

When the mechanical watch stops, the priority is to think about whether it is caused by lack of power. Hand-wound watches should be wound at the same time every day as much as possible so that the watch can operate with sufficient energy for the next 24 hours. Quartz watches, on the other hand, can be actively wound and should be worn on the hand for more than 8 hours a day to replenish the mainspring.

Lack of exercise after wearing it will also show that the watch does not move or stop.

If the watch is used for a long time, then its wear and tear will be more serious, and the external maintenance of the watch will be easily damaged. It is necessary to regularly replace the watch you are wearing, and it is necessary to maintain the watch regularly, for the service life of your watch, it is better to maintain it regularly.

I think you can go to him for this question, and you should know what the reason is.

It is recommended to go to the Jaquet Droz Maintenance Center [2nd Floor, Ruili Building, No. 1325 Huaihai Middle Road, Xuhui District, Shanghai] to check it.

Lacking in power, an automatic watch uses the movement of the arm to complete the winding. If the watch is left for too long or the amount of arm movement is less every day, the clockwork energy of the watch will be due to insufficient winding, and it is easy to produce the phenomenon of inaccurate time or night stopping. The hairspring is faulty, and the clockwork will be tighter if the amount of exercise is large.

If there is a problem with the upper bar mechanism that causes insufficient power, it generally appears between 9 o'clock and 12 o'clock in the evening, "with a calendar function table" because at this time the hour wheel begins to drive the calendar wheel, and the load is large, if the power is insufficient, it is easy to stop during this time period. This time should not be reversed dial needle, now many mechanical watch calendar roulette using plastic parts, accidentally will break the gear, once the tooth is broken, every day at this time will be stuck, or to a fixed day auspicious period will no longer jump. As a result, the mechanical watch was stopped.

Bump failure, the watch is a precision mu pure instrument, once the bump receives a violent vibration, then the parts may fall off or damaged, you can let the watch steal stop.

When the watch is worn and used daily, it is easy for the watch hands to fall off when it is impacted. Since the hands are installed in layers, and the top tube is connected to the second hand, the second hand is usually lost.

Watch hands fall off need attention:

1. Avoid moving the watch, so that the hands scratch the dial or the hands are damaged.

2. For some hollow watches, try to avoid the small needle falling behind the dial.

3. After the crown of the watch is pulled out, it should be repaired in time to prevent the watch from entering the dust and damaging the movement.

The maintenance address is located in Room 1003, 10th Floor, Hongyi International Plaza, No. 299 Nanjing East Road, Huangpu District, Shanghai.

There are two main reasons why the watch stops.

First, the power is insufficient.

The quartz watch may be a dead battery, please replace it as soon as possible, otherwise it may cause the battery to leak and corrode the movement;

Manual mechanical watches may not be wound in time, and should be wound at the same time every day as much as possible so that the watch has enough energy to operate in the next 24 hours;

Automatic watches may be worn for too short a day or with insufficient exercise after wearing, because such watches need to rely on the movement of the arm to drive the rotor to rotate to generate energy, and it is generally recommended to wear it for no less than 8 hours a day.

Second, the watch is faulty.

Foreign objects entering the movement, and the watch is knocked or dropped and the crown is loosened, which will affect the sealing of the watch;

Watches are magnetized, and strong magnetic fields can be seen everywhere in life, such as magnetic buckles of leather bags, electrical appliances, etc.;

The movement is rusty, which is mainly caused by water ingress into the watch, please try to avoid exposing the watch to humidity or high temperature differences;

When the lubricating oil dries, it will increase the resistance of the movement of the parts, and it will stop when it is serious, so it is necessary to do regular oil washing and maintenance.

The reason for the mechanical watch to stop.

1.Insufficient power: mechanical watches are divided into manual mechanical watches and automatic mechanical watches, insufficient power is an important reason for the watch to slow down or stop the watch, manual mechanical watches can be wound directly when slow, and the reason why automatic mechanical watches are slow is mostly because of insufficient wearing time or the arm does not maintain a normal amount of movement, and it can be directly manually wound to supplement the power.

2.No maintenance: mechanical watches are generally maintained once every 2 to 3 years, the watch is used for a long time, the lubricating oil in the movement will dry up, and the friction of each gear for a long time will produce iron filings, increase the friction between the gears, this kind of problem only needs to clean the movement, re-refueling.

3.Shock: A mechanical watch has a complex structure and is composed of hundreds of precision parts, which is very fragile, and the watch is subjected to a strong impact, and the parts in the movement may loosen and cause the watch to slow down or stop.

According to the reason why the watch is slow, you can take corresponding measures, pay attention to the winding of the manual machinery, maintain the normal amount of exercise of the automatic mechanical arm, maintain it on time, pay attention to the watch waterproof, shockproof and anti-magnetic, and send it for repair in time if there is a problem.

4.Hairspring failure, hairspring failure is also one of the reasons for the mechanical watch steal stop, the above mentioned lack of power caused by steal stop, on the contrary, if the amount of exercise is too large, the clockwork is relatively tight and causes the failure of the upper bar mechanism, it will also cause insufficient power, this situation generally occurs at about 9 o'clock to 12 o'clock in the evening, at this time, the watch with calendar function turns the roulette wheel, which will lead to insufficient power calendar jam to stop the watch. This kind of technical failure also needs to be tested and repaired by a professional watch repair shop.

5.Watch magnetization: Watch magnetization is one of the common reasons for watches to slow down, even anti-magnetic watches can not be placed next to electrical appliances with magnetic fields, such as TVs, automatic mahjong machines, etc.

Because some of his parts are not anti-magnetic, they will still be magnetized over time. The watch is magnetized and needs to be demagnetized by a professional watch repair facility.

Our mechanical watches often have the situation that the time is not accurate, and most people wonder if the mechanical watch is broken. There are many reasons why a mechanical watch can be parked, but there are several main reasons.

1. Insufficient kinetic energy.

2. Gear failure.

3. Lack of maintenance.

Mechanical failures such as magnetism, lack of maintenance, malfunction of the watch hairspring, escapement system, slippage of parts, etc., can cause the watch to be fast and slow. Mechanical watches are sometimes fast and sometimes slow, and it may be caused by severe impacts, water ingress, etc.

In life, there is more than one reason why the watch does not go: there are many reasons such as bumps, magnetism or moisture of the watch, drying of oil sludge for a long time, misalignment of the movement gears, and many other reasons will cause the watch not to go. So if the watch is gone, you have to go to a professional repair shop to deal with it.

Reasons why the watch is not running accurately:

1. Insufficient power reserve. If the amount of exercise is small, it may also cause a lack of power reserve, so you can replenish the power by winding it manually, and then observe whether it continues to be fast or slow.

2. The watch has been hit or impacted, which may cause loose damage to the internal parts and may also cause the problem of running time.

3. The lack of oil in the movement or the wear and aging of the internal parts may cause the problem of running time, which needs to be maintained.

4. The watch is magnetized: If the hairspring of the watch is magnetized, the watch will not be accurate. The influence of the wearer's usage habits may cause an increase in the time error. Sending the watch to a repair center for inspection and adjustment will restore the watch to its normal tolerance.

a.Lack of power: If your quartz watch suddenly notices that it is slowing, it is likely that the battery is running low, and you can take your Blancpain watch to an authorized repair center to have its battery level checked.

b.Insufficient power reserve: You need to check whether the power is sufficient, if the amount of movement of the self-winding watch is small, it may also cause insufficient power reserve, you can replenish the power by manual winding, and then observe whether it continues to be fast or slow.

c.Blancpain watches are magnetized: if the hairspring of a mechanical watch is magnetized, the watch will not be accurate.

d.Need for maintenance: Lack of oil or wear and tear of internal parts of the movement may cause time-running problems, and need to be sent to a designated repair point for maintenance services.

e.Having been hit or impacted: The watch is very delicate, and if it is hit or hit, it may cause loose damage to the internal parts, and it may also cause time problems.

Please send the watch to the designated repair point for professional inspection and adjustment, which can restore the watch to the normal error range.

The service center provides Jaquet Droz watch strap customization, cleaning and maintenance, identification, refurbishment, fault repair, watch appearance parts damage replacement, strap replacement services. Our technicians have undergone strict professional skills training and provide two years of after-sales guarantee services. The service center is guided by the watch manufacturer on the spot**, **transparent, no hidden consumption, no additional charges.

Insufficient power reserve: You need to check whether the power is sufficient, if the amount of movement of the self-winding mechanical watch may also cause insufficient power reserve, you can replenish the power by manual winding, and then observe whether it continues to be fast or slow.

Insufficient kinetic energy: The watch is not winded enough, and the kinetic energy is insufficient. In particular, automatic watches require more arm movement, and the winding efficiency is very low. If you usually exercise a little bit, you can wind it manually, which can ensure enough kinetic energy.