High scores seek home router masters, high scores seek a wireless router

Turn off the power of the router, find a sharp object like a pen tip, and hold down the reset key;

Power on the router, wait for about 3-10 seconds, some lights will flash three times at the same time, if not, you can secretly calculate the time, generally about 10 seconds can let go, and the reset is successful.

How did you reset.

Press and hold the reset button while powered on, then unplug the power supply for 3 seconds, plugging in the power cord and not releasing the reset button halfway.

If it doesn't work, see if the network cable is working normally, otherwise it's a routing problem.

My route is the same as yours, I really begged for foolishness, and I did it for two or three days, and in the end, I actually solved it by calling the customer service, and they knew what was going on! Don't waste time looking for problems!

The default IP of dlink seems to be. Did you reset it incorrectly? First of all, turn off the power, then install the reset button and plug it in at the same time. After a few seconds, you release the reset button again. This resets.

Restart and try again. Take the power supply off. Then press the restart button for 20 seconds. Plug in while pressing the restart button...

Turn off all firewalls, anti-virus software, turn off the router for 2 minutes, and then turn it back on.

After you try again.

You have a total of three clients.

Recommend the cost-effective D-Link DI-504M transmission speed 10 100M, the number of users 4 sets, **85

It's good to find a home in the store or ** online, and you can transmit more than 100m. Generally TP's.

Just use a TP-Link wireless router.

First of all, I will tell you how to prevent rubbing the net:

1. Disable SSID broadcasting, and you can set SSID off in the "Basic Settings" in the "Wireless Parameters" in the wireless routing settings of the task brand!

2. Re-set the SSID name, the SSID name is generally the brand and model of the router, it is recommended to change it to prevent others from "touching"!

3. Change the router username and password, the router username and password are admin by default, it is recommended to change it to avoid others "touching"!

4. Re-set the IP address of the router, the IP address of the device is defaulted to this earthling, oh no, the whole universe knows it, so it is quite insecure! It is recommended to change it to an unfamiliar address, so as to prevent others from choosing to set up the entrance to our device!

5. Reduce the range of DHCP allocation address pool (100 available IPs are assigned to the route by default).

6. It is recommended to start MAC address filtering, but it should be noted that MAC address can be changed, if you configure the previous settings, then you don't have to worry about others getting your MAC address.

Note: The reason for the IP address conflict is that the IP address in the DHCP address pool in the router has not been released, so it is mistaken for an IP address conflict, but it does not rule out the possibility that someone else is rubbing the network, because the most obvious situation when someone else rubs the network is to prompt you with a route conflict.

Don't ask, get it automatically.

Is your desktop set up manually?

Change them or get them automatically.

You can just encrypt the wireless route, make the password more complicated, and then the alphanumeric combination will not be used to rub the network.

Then bind the MAC address to it.

Buying the cheapest route is enough for you.

1. How to set up the main router:

1. Plug the network cable (bus) into the WAN port of the wireless router, plug one end of the network cable into any LAN port of the wireless router and connect the computer network card at the other end, and turn on the power supply of the router.

3. Then enter admin, the default account name and password are the same (there is also a prompt for the original data on the back of the router) to confirm.

4. After entering the wireless router setting interface, select the Internet access method according to the setup wizard (different broadband options are also different), and enter the Internet access and password.

5. Save and continue to set the wireless key, (it is recommended to use a combination of numbers and English for the password, and it is best to use the @ symbol in the middle, so as to prevent others from rubbing the net).

6. After saving, you can surf the Internet normally.

7. If it is abnormal, you may wish to click the reset button of the wireless router and set up the router again.

Second, the setting method of the secondary router:

1. Do not connect the secondary router to the main router first.

2. One end of the network cable is connected to any LAN port of the secondary router, and the other end is connected to the computer.

3. Change the LAN port IP of the login interface through the computer browser to avoid conflicts with the IP segment of the main router;

4. WAN port Internet access mode selection: dynamic IP connection, enable DHCP server.

5. Wireless settings and keys, save and exit.

6. Connect a network cable from any LAN port of the main router to the WAN port of the secondary wireless router, and the computer can access the Internet at this time.

It seems to be to board the router management, that is, there is a sticker under the router, which has a management address written in it, and after going up, log in to your broadband password, and that's it.

It is not recommended what brand of router you buy, but it gives you a few suggestions for buying.

1: As long as you don't buy a miscellaneous router, you can buy a silver date from some popular brands or well-known brands.

For example, TP, D-link, etc., buy any of these brands.

Don't listen to other people's comments, no matter which relevant forum you are in, you can see some reviews that are not favorable to the router you chose, some of these reviews are untrue, and you will only know if you have used it yourself.

In fact, this kind of product, even if you buy a famous brand, if you accidentally buy a bomb, it is still possible. A friend of mine and I bought the D-Link together, but he always dropped the connection, and mine didn't, so I finally replaced it with a good one. But you can't deny the brand because of this one product, don't you say?

2: To buy at least dual antennas, ** in 80-200 yuan, family use is enough.

3: When you buy it, ask the boss how much megabyte bandwidth the router can identify up to wirelessly.

Explanation for the third point: My home is now 50 trillion bandwidth, used to be 2 trillion bandwidth, Feng Ju dismantled the router I bought a long time ago The wireless function can identify up to 20 megabytes, and then I ran 3 times before I bought a router that can identify the hole to 50 megabytes.