How should a new router be set up from start to finish?

If it's a brand new route, it will have detailed steps on the manual, which will definitely be more detailed than here. Take a good look. If it doesn't work, it will explain the model and explain where the problem is.

What model of router, is it wireless or has a line, the configuration of each route is not the same, tell me the specific model I will tell you how to configure.

If you change a router, you need to reset it to surf the Internet normally. Here's how to set up your router:

1. Here prompts you to enter the username and password, the default username and password are admin, which is also written in the router manual. After entering, press enter to enter the router configuration interface. Note:

The default IP address of TPLink router is basically the same, and the password is basically admin, and you can enter the router interface for the first time.

2. Select Setup Wizard here.

3. Next step.

4. Choose ADSL virtual dialing here, most of them choose it, scatter the rest of the static that is selected by private line users, broadband users, Tietong, Netcom and other virtual dialing users, just choose it, and then the next step. Repentance.

5. In the next step, press Finish to set up the route.

6. Set the network parameters at the point, set the WAN port setting, and save the settings.

7. When you get here, everything in the router is set, and now it's OK to just restart the router. Point the system tool, reboot the router, and in a few seconds you'll be fine.

8. At this time, close the configured web window, connect to other computers and go online.

It's simple!

1. Connect the ADSL cat and the router first, there must be two straight-through bifocal network cables (1 meter 1 yuan), first connect a network cable with the first computer, after starting the computer, stop at the address of IE: Enter, the setting interface of the router will appear.

2. After setting, add the telecom Internet account and password, and the router will assign an IP address to the computer, and you can detect whether the first computer can access the Internet.

3. The first one can be on, connect the second one directly to the router, and the IP will be automatically assigned, and it will be OK.

Different Internet environments have different ways to set up wireless routers.

If it is a fiber modem wireless router that requires dial-up, set it up as follows:

1. Plug in the wireless router, don't connect the cat first, and connect the computer to any LAN port of the wireless router;

2. Enter the IP address of the router in the address bar of the browser (on the label behind the router), and enter the login username and password to enter the settings page;

3. Set up according to PPPoE (ADSL virtual dialing) mode, enter the Internet account and password;

4. Set the SSID, encryption method and password;

5. Save and restart;

6. After setting, connect the network cable from the cat LAN port to the WAN port of the wireless router.

The steps to reset your router are as follows:

1. First, press and hold the reset button on the back of the router until the router resets its factory settings, and then restart the router.

2. After checking that it is correct, open the browser and enter: press Enter to enter, at this time a dialog box pops up, you need to enter the account name and password, there will be in the back of the router, in general: account name:

admin password: admin.

3. After entering the password behind the router, you can log in to the settings page of the router.

4. Click on the setup wizard on the page and follow its requirements step by step.

5. Click Next to enter the account password setting, this account password is the account password of the current network network, if you don't know, you can consult the network operator.

6. After setting the account and password for surfing the Internet, the function of wireless Internet access is set, set the wifi name and wifi password, it is recommended that the password is not too simple, it is easy to be cracked, and the encryption method can be recommended by the system.

7. Click Done, restart the router, and the settings have been successful.

Reset the router: Find a small hole or button labeled REST (or guest) on the router, poke it with a toothpick for more than 5 seconds, and go back to factory settings.

How to connect and set up the router: Connect the computer to the LAN interface of the router with a network cable, and set the router as follows:

1. Log in to your router (enter or log in in IE, enter the username and password, and the router label is there.) Usually admin).

2. Go to the "WAN" setting

A If your broadband requires an account password, set up PPPoE, fill in the account password, select Automatic connection as the connection mode, and confirm that if your operator binds the account to your computer, choose to copy the MAC address of the terminal.

b If you don't need the account password, if you are given a fixed IP, please select a fixed IP address and fill in the correct address of the fixed IP address, mask, gateway, and DNS.

c If you don't need the account password and it is a dynamic IP address, please select a dynamic IP address and fill in the DNS address.

3. Go to the wireless settings, select WEP or WP2-PSK, set the wireless password, and remember this password.

4. Go to the "DHCP" settings and activate the DHCP server.

5. Set "LAN IP" to, remember to use this IP to log in to the router in the future, and save it after setting.

6. Connect the broadband network cable to the "WAN" port of the router, and connect the computer to one of the "LAN" ports of the router.

7. The computer is set to automatically obtain IP address and DNS address.

Computers, mobile phones, and wireless devices should be able to access the Internet.

If there is no wireless function, ignore the wireless part.

Find the reset button on the back of the router and enter It is recommended to buy 360 secure router 5G, there are two frequency bands and 5G, which is more practical, 5G Internet access is really fast, and it is also affordable in comparison. Wide signal coverage, safe and stable, multi-mode, children's online management.