What are the advantages of imitation stone paint?

Pure Propionic Acid 30%.

Natural colored stone sand 65%.

Thickener 3%.

Plasticizer 1%.

Other additives 1%.

First, add emulsion, thickener, plasticizer and other additives and stir well, and then slowly add natural colored stone sand and stir evenly to package. Pure Propionic Acid 60%.

Water 35%, anti-mildew, preservative 2%.

Other additives 3%.

Add emulsion, additives, etc. first and stir well, then add water and stir well to package. Component A.

Polyurethane resin 60% coatings, inks, resins, adhesives, formulations.

Butyl acetate 18%.

Xylene 20%.

UV resistance 1%.

Other additives 1%.

Mix and stir well, and it is ready to pack.

Component B. HDI Curing Agent (75%) 66% UV, Radiation, Waterborne, Additives, Pigments.

Butyl acetate 34%.

Mix and stir well, and it is ready to pack. (Note: The flour oil needs to be mixed and prepared according to the ratio of a:b=4:1, and can only be used after stirring evenly, and the service life cannot exceed 8 hours. ）

Imitation stone paint is more durable than ordinary exterior wall paint, such as UV resistance, weathering, weather resistance, long service life and so on. After the ordinary exterior wall paint is used for a period of time, there will be various problems, such as hollow drum falling off, yellowing and alkali return, etc. And the decorative effect of imitation stone paint is also very good, and the shape is comparable to real marble.

When decorating a house, you need to use various types of paint, including imitation stone paint, so what exactly is it? PChouse will take you to find out.

Imitation stone paint is a kind of thick exterior wall decorative paint with a decorative effect similar to marble and granite. The main goaf is prepared with natural stone powder of various colors and is mostly used to make the imitation stone effect of the exterior wall of the building, so it is also called liquid stone.

Imitation stone paint has fireproof, waterproof, acid and alkali resistance, and pollution resistance. Non-toxic, tasteless, strong adhesion, never fade and other characteristics, can effectively prevent the external harsh environment from eroding the building, prolong the life of the building, because the imitation stone paint has good adhesion and freeze-thaw resistance, so it is especially suitable for use in cold areas. Imitation stone paint has the advantages of simple construction, easy to dry and time-saving, and convenient construction.

Hours After 24 hours, polishing.

2.Spray the bottom oil twice--- spray the real stone paint 2-3mm--- spray the face oil twice.

3.Construction technical indicators: UV, radiation, water-based, additives, pigments.

1) Spraying primer: choose a lower pot spray gun, the pressure is 4-7kg square centimeter, the temperature during construction can not be lower than 10 degrees Celsius, spray twice, with an interval of 2 hours, a thickness of about 30 microns, and dry at room temperature for 12 hours.

2) Spraying real stone paint: choose real stone paint spray gun, air pressure is controlled at 4-7 kg square centimeter, the construction temperature is more than 10 degrees Celsius, the thickness is about 2-3mm, if you need to apply two or three coats, the interval is 2 hours, and the drying can be polished after 24 hours.

3) Grinding: Use 400-600 mesh sandpaper to gently smooth the raised sand particles on the surface of the real stone paint. Pay attention to the force should not be too strong, otherwise it will damage the paint film, cause the bottom to loosen, and in serious cases, it will cause poor adhesion and the real stone paint will fall off.

4) Spraying oil: choose a lower pot spray gun, the pressure is 4-7 kg square centimeters, the construction is not less than 10 degrees Celsius, spray twice, the interval is 2 hours, the thickness is about 30 microns, and it takes 7 days to completely dry.

4.Construction substrates and requirements:

It is suitable for concrete or cement interior and exterior walls and brick walls, as well as asbestos cement boards, wood boards, gypsum boards, polyurethane foam boards and other substrates. The surface base of the construction substrate should be smooth, clean, and has good strength, the new wall should be hard for a month, before construction, the old wall is renovated, the base layer must be leveled first, and the impurities such as looseness, peeling off the surface layer and dust and oil scale can be constructed.

Is the landlord going to open a store? Or is it for decoration?

1. If you open a store:

If you want to do imitation stone paint, choose a big brand, Bardes imitation stone paint, no need to worry about brand fame, simple operation in the early stage, as long as you do a good job of receiving orders and construction services.

2. If you use it for your own home decoration:

It is also a good brand, and how to construct according to the process.

How to do imitation stone paint: The practice of imitation stone paint is that after the cement mortar is scraped, it needs to be cured for more than 15 days and completely dried. After the cement mortar is scraped, it needs to be cured for more than 15 days until it is completely dry.

Before the front is scraped with the exterior wall elastic putty powder, and then spread the mesh cloth, after drying, scrape the exterior wall elastic putty powder once or twice, so that the wall has a good flatness. After it is dry and can be polished, the spine of the code is cleaned and cleaned, and the sealing primer of Ali Master is used to completely seal it, and the coating cannot be missed. Grid line construction:

According to the height, width, design and planning of the wall, the grid is reasonably divided and divided, and the black paint is painted, and the black paint is dried and pasted with high-quality masking paper. Before construction, ensure that the thickness of the construction wall is uniform, and spray Ali master granite paint in a medium coat.

01 First of all, we need to clean the base surface to be treated with imitation stone paint, and clean the dust on the surface. When there is a hollowing phenomenon at the grassroots level, it should also be eradicated and repaired.

02 We carry out smooth scraping of the construction base, that is, we call scraping putty, scraping putty to keep the whole flat.

03 We are using a special anti-alkali sealing primer to treat the base layer. It is mainly used to improve the adhesion of the surface layer of imitation stone flake paint.

04 After that, we can play the line grid. We sit down and then use spray paint to spray it