What is the best material to choose for the decoration partition wall?

I feel like I can choose a lighter material, like drywall.

The partition in our house is made of wood, pure solid wood material, which is environmentally friendly and looks very beautiful, and I feel very good.

If the quality is strong enough, you can use cement brick walls, not gypsum board or wood.

Depending on what you decorate, if you decorate the shop, you can use light steel wheels to make it very thin, 5 cm, saving space, and it is also very convenient to change it later. However, if it is used at home, in the living environment, there are more material surfaces, and for moisture resistance, the load-bearing sound insulation performance is relatively poor. Home decoration is directly built with green bricks, plus the later powder wall tiles, at most 12 cm thick, but load-bearing, sound insulation, durability is better.

The block is better, the use of the block belongs to waste utilization, which saves resources, and its first is also very reasonable, strong and durable, and not easy to deform.

The material used is Demai building materials, and I feel that it is not bad, and their glass bricks not only have good pressure resistance, but also have a good sound insulation effect, and their reputation in the market is also good.

In general, it is best to choose wood materials, because wood materials may be more comfortable to use, and have a sense of fashion.

It is better to use foam bricks, and it is necessary to work more, but the sound insulation and other effects are the best.

Personally, I feel that you can choose those paints that do not have formaldehyde, and then choose some wood with a smoother appearance.

Generally, the materials selected may be more stringent, and the sound insulation effect of the partition wall should be particularly good.

1. Glass bricks.

Its main source material is glass, bai

It is a material that is made up of two pieces of glass that are then bonded together in a process of smelting. It is simple and convenient to construct, just mix cement with glass glue to seal the gaps of glass bricks. The advantages of this material are good sound insulation, good heat preservation, good lighting, and rich patterns, but the disadvantage is that it is high, and the single piece is about 20 yuan.

2. Solid wood plywood.

This material has good applicability, can be cleverly matched with various styles, and its material is light and thin, and it does not occupy a place to use, and has a good decorative effect.

3. Clay bricks.

This material is more commonly used, it has a low life, a long service life, and a good decorative effect. However, its volume is heavier, the flatness is not high enough, and the environmental protection will be poor, so it is a more traditional partition wall material.

4. a partition board.

This is a kind of partition material that is used more at present, and its advantages are that the material is strong, the durability is good, and the construction is simple, and only need to be spliced at the construction site. However, due to its large size and relatively fixed specifications, it is not easy to cut again, so it has some limitations in indoor partitions.

5. Blocks. This kind of partition material is also more popular, it actually refers to lightweight bricks. It is more affordable, harder, more durable, lighter, not easy to deform, and can also be nailed. But the disadvantage is that if we need to dismantle, it will take a lot of effort and be more troublesome.

1. Light steel frame compartment.

Light steel frame compartments are often made of steel as the skeleton, and the surface is sealed with fireproof boards, such as cement boards, gypsum boards and other boards. The light steel frame compartment can be divided into dry type and wet type according to the construction method. Dry construction does not need to contact water, and the board is filled with sound-absorbing cotton, which is fast, light in weight, simple and convenient in construction; The wet type, on the other hand, requires lightweight concrete to be poured into the slabs, which requires a drying time.

Compared with the two, the waterproof and sound insulation effect of the wet light steel frame compartment is better, and many families will use the wet construction method!

2. Wooden light compartment.

Wooden light partition, as the name suggests, is to use wood as the main partition material, with the advantages of simple construction, convenient and fast, beautiful appearance and so on; However, because of the physical characteristics of wood, wood light partitions are easy to be deformed by moisture and are not fireproof. If you want to make a wooden light partition, it is best to use it with calcium silicate board, which can have a certain fire prevention effect as the surface of the wooden partition wall!

3. White brick wall light compartment.

White brick is a kind of lightweight brick processed by high temperature and high pressure, which has the advantages of light texture and convenient construction. The use of white brick interior partition walls can effectively reduce the pressure on the floor. The construction of white bricks is very simple, without watering, sediment.

This dry construction method is simple and fast, and has a good effect of fire and sound insulation. However, the white brick wall light compartment is not suitable for a humid environment, and its waterproof effect is relatively poor, so it is best not to use a white brick wall light compartment in the bathroom!

4. Ceramite wall light compartment.

Ceramsite wall, that is, in the production process added ceramsite, clay, etc., high temperature and high pressure firing, ceramsite wall finished product hardness, high quality, at the same time has the advantages of heat preservation, wear-resistant, fireproof and sound insulation. The ceramsite wall panel can be tailored according to the size of the space, and then transported to the construction site for on-site installation, which greatly shortens the construction period!

1. Gypsum.

BAI board partition is relatively convenient, has a certain fire performance, and DAO also has an adjustment back.

The function of humidity.

2. Lightweight bricks and cement sand ash are relatively strong, will not increase the floor load, and have good sound insulation effect. But ** is more expensive than gypsum board.

3. The glass partition is good-looking, and the space partition will not affect the line of sight, but will make the line of sight more spacious and bright, but it is more expensive than the first two.

4. Glass bricks, brick-like building materials made of glass. Glass facing bricks are inseparable from the support of the wall or frame structure, and must rely on a certain carrier to be used, and are generally used in home decoration or some entertainment venues with special requirements.

5. Wooden screen partition is highly decorative, depending on whether it is solid wood or board or better wood. The downside is that the sound insulation is not very good.

Drywall: It can be used in both kitchens and bedrooms, mainly depending on what kind of drywall it is.

Lightweight bricks and cement sand ash: there are many advantages, and they are suitable for indoor use.

Glass: Office or bathroom partitions are more commonly used.

Glass bricks: toilets, outdoor public partitions.

Screen partition: living room, bedroom can be, not only play a partition role, but also decorative role.

The traditional wall BAI partition generally adopts DU

Gypsum partition, rock wool color steel plate, polystyrene zhi color steel DAO board and other materials.

However, these materials generally have problems such as poor sound insulation, poor fire prevention, insufficient fire protection, and insufficient strength. Now there is a new type of wall partition material on the market--- phenolic color steel insulation board, which completely solves the shortage of these materials.

1. Light white steel keel gypsum board, ** is relatively cheap, but soundproof

It doesn't work very well. 2. Light bricks and cement sand ash are relatively strong and sound insulation.

Answer: Drywall is good. But it is relatively more expensive than drywall. 3. Tempered glass partition is good-looking, but it is more expensive than the first two.

4. Glass bricks, brick-like building materials made of glass. 5. Wooden screen partition is highly decorative, depending on whether it is solid wood or board or better wood. The downside is that the sound insulation is not very good.

The traditional wall partition is generally made of gypsum partition, rock wool, color steel plate, polystyrene color steel plate, etc

materials, but these materials generally have problems such as poor sound insulation, fire prevention does not meet fire protection requirements, and insufficient strength. Now there is a new type of wall partition material on the market--- phenolic color steel insulation board, which completely solves the shortage of these materials.

It is better to use cutting material for partition walls.

1. The partition wall of clay material is the lowest among these materials, but there are certain problems with the quality of the partition wall of this material.

2. In comparison, the partition wall of block material will be more cost-effective, and it is understood that the partition wall of block material is about 3 yuan per piece, and the service life of the partition wall of block material is also relatively long, and the practicability is also great.

There are several kinds of materials for decoration and partition walls.

1. The main material of the indoor partition board is generally composed of gypsum and lime and other materials, and the partition board of this material is very strong and durable, and will also play a better role in partitioning.

2. Glass brick material can also be used to make partition walls, which can play a better sound insulation effect and meet the problem of lighting in the house.

3. Clay brick material can also be used to decorate partition walls, the flatness of partition walls made of this material is not particularly good, and the environmental protection of clay is also relatively poor.

4. The block material is also a more common material for partition walls, the firmness of this material will be better, and it is not easy to deform in the case of a humid environment.

The villa master provides you with local building policies, building drawings, and villa design drawings;

Villa appearance renderings service, thousands of popular drawings for you to choose.

Villa Master.

The materials that are good for decorating partition walls are bricks; gypsum board, cement board; prefabricated partition panels; Gypsum keel.

1. Bricks. <>

is the most primitive way. After the bricks are built, you only need to apply putty on top to create the same effect as the rest of the walls of the house, which is conducive to the overall beauty of the house. Using red brick to make partition walls can also make the wall stronger, and compared to ordinary materials, this red brick material also has a good sound insulation effect.

2. Gypsum board, cement board.

In order to save space, some homeowners choose to use plasterboard when choosing what material to use for partition walls. Gypsum board is cheap, and it is relatively thin, but it is also not strong enough, and the sound insulation effect is very poor. Some consumers will choose to use cement board, because this is a material that has the advantages of both red brick and gypsum board.

3. Prefabricated partition panels.

Most of the prefabricated partition panels are made of gypsum and sand plaster and other materials, which are spliced at the construction site after direct production by the factory, it has the characteristics of strong and durable, and the general building main structure is completed, and the prefabricated partition panels are used to separate the interior pattern.

4. Gypsum keel.

After we lay the frame with the keel, and then close it with gypsum board, it becomes the gypsum keel. The keel is divided into two kinds: wooden keel and light steel keel, the material generally used in the wooden keel is pine, which has more specifications and can be processed; The light steel keel specification is relatively fixed, and its thickness is generally only 75 mm.

Introduction to the decoration partition wall

Partition wall, also known as high partition, high partition, high partition wall, and even called office screen, is mainly used in office space, which is this feature, which distinguishes the partition wall from the sanitary partition. Partition walls sprouted in the United States (World War II) and developed in the fifties and sixties, due to the high degree of specialization, commercialization and socialization of building materials and components in these countries.

Partition walls are also called high partition walls, or even office screens. Mainly used in office space. That is, this feature makes the partition wall different from the sanitary partition wall.

Partition walls are emerging in the United States. Due to the high specialization, commercialization and socialization of the commodities and components of building materials in these countries, the industrialization of decoration has matured. One of the biggest differences between partition walls and solid walls is the ease of removal and installation.

It doesn't have a load-bearing role, but it's still very convenient. A partition wall is an interior wall that separates one part of a structure from another. A partition wall is a component that separates a space and is one of the non-load-bearing walls.

Partition walls are usually the same as normal walls and are the elevation at the top.

What materials are generally used for partition walls? Most of the prefabricated partition panels are made of materials such as gypsum and sand plaster, which are spliced at the construction site after being produced directly at the factory. It is rugged and durable.

After the completion of the main structure of the general building, prefabricated partition panels are used to separate the interior mode. The prefabricated partition panels are large in size and relatively fixed in size. It cannot be cut and is used less in later decoration processes.

Gypsum keel, we use keel as a frame, and then seal it with gypsum board, it becomes a gypsum keel. Keels are divided into wooden keels and light steel keels. The wooden keel is generally made of pine, with many specifications and can be processed; The light steel keel specification is relatively fixed, and the thickness is generally only 75mm.

The gypsum keel is very lightweight, and it is also easy to disassemble and assemble, but the sound insulation and thermal insulation effect is poor.

In addition, bricks, is the most primitive way. Once the bricks are laid, simply apply putty to the bricks to create the same effect as the rest of the walls of the house, which will help the overall aesthetics of the house. Partition walls made of red brick can also make the walls stronger.

Compared with ordinary materials, this red brick material also has a good sound insulation effect. However, the use of this red brick as a material will not only make the ** higher, but also take up a larger space in the house and reduce the overall area of the house. drywall and cement board.

In order to save space, some owners choose to use gypsum board when choosing partition wall materials. The ** of drywall is cheap and relatively thin. Similarly, it is not strong enough and poorly insulated.

Some consumers will choose to use cement board because it is a material that combines the advantages of red brick material and gyplight board material. It is indeed widely used by people. However, this production does not achieve an aesthetic effect.