Router Manager cannot log in after changing the password

To modify it again, the modification steps are as follows:

First of all, we type in the address bar of the browser, and then enter the router management interface.

Here, we select "System Tools" and open the option "Change Login Password" to change the login password.

The original username and password are admin, and then everyone chooses their own username and password, and after modification, save it to successfully modify the router login password.

Set the password for the router's wireless signal connection.

When entering the router management interface, here, we open "Wireless Settings" and enter "Wireless Security Settings".

Here, we first need to turn on the wireless security settings, and then choose the security type. Security Tips: To ensure network security, it is highly recommended to use the WPA-PSK WPA2-PSK AES encryption method.

Regarding the authentication type and encryption algorithm settings, I recommend that you still have the default settings of the system, and we will not modify them here. Including the group key update cycle is not modified, we only need to enter the psk password we set. It is recommended to use numbers and letters for the PSK password, which is more secure.

After clicking Save, the router will ask the user to restart the router for the configuration to take effect.

I'm also having a similar issue that needs to be addressed.

Hello: When using wifi connection management, your router needs to start the wireless function in advance, enter it on the browser, then enter the router password, find the wireless settings, and turn it on.

And the current PC Manager router manager currently supports, some models of Mercury, TPLink and Fast. If you do not belong to the above models, you cannot use it.

What kind of router are you using? If it is a few models with a relatively high usage rate, it will not be a problem, such as TP-link, Mercury, etc.

If there is no problem with the account and password, you can log in normally.

You can try resetting your router, there should be some reset button on your router.

Another netizen's copy and paste will not solve your problem at all.

Your question is actually very simple, if you forget the router password, you look for the router body, there should be a small hole or reset button, press and hold it for 10 seconds, the router will be restored to factory settings, and its login password will also be restored to the default password (see the instructions on the router label).

Let's find out

Hello:Computer Manager Router Manager function view in detail:

You have already changed the password, you can only factory reset the router, and then set up the router again.

Hello: Brain Manager Router Manager currently supports some models of Mercury, TPLink and FAST.

Please check if you have any of these 3 brands of routers, if you are not one of these 3 brands, or if you are already from these 3 brands but there are a small number of models that are not supported, please pay attention to our subsequent version updates.

Computer Manager Router Manager function for detailed view:

You can find the reset button on the router, when the router is powered on, press and hold the reset button until the router automatically restarts, and then log in to the router settings with the initial account and password on the label on the back of the router.

Router restore factory value password press and hold the reset button, after 5 seconds, the original settings are basically cleared, log in with the initial password and set it again.

The main reasons for the wrong password of Router Manager are as follows:

1 When logging in to Router Manager to enter the password, I entered it incorrectly2 The version of Router Manager is too low, and the password cannot be recognized in time, prompting error3 The router is not connected to the network, causing the Router Manager to be unable to connect to the network from time to time, and the password cannot be successfully connected by entering.

4 The router device is damaged and cannot be recognized by Router Manager.

5. There are too many programs running in the background of the computer, which causes the computer to run slowly, fake death, and the router manager cannot run normally.

If the password is correct, try the username: root

1. The password has been changed by others, if the password is the default admin, and you have not changed it, others can change the password through the wireless connection. Solution: There is a small button on the back of the router, press and hold it with a needle or toothpick, reset the router to factory reset, and set the password by yourself.

After the reset, log in to the router management according to the address on the back of the router and the login user password, and click "System Tools" - "Modify Login Password" in the left navigation

Then enter the default password, and then enter the login password that you want to change.

If you have any other questions, please feel free to consult the computer manager business platform, and we will serve you wholeheartedly!

Actually, PC Manager doesn't support your router.

Check the case. In addition, it is recommended that you use 360 one-click free wifi

Factory reset. That's it.

Do not use Sogou or any input method to input with the system keyboard.

First of all, determine the router to which the line is entered, the first line is the line that comes out of the cat, and the optical fiber is the direct network cable to the WAN port.

Enter the IP address of the router, usually and .

Then enter the username and password, admin, admin (some don't need to enter the following admmin).

Just go in and design.

Good luck.

The username is admin, and the password is admin, otherwise any other password you enter will not be reflected! Set a password for the router, which is not the router itself, but the password set to receive the wireless network after the wireless function is turned on. There is no need to set any password on the route when the network cable is connected, otherwise it will ......!

You don't need to react! What you set should only be the account and password for entering the router, and yours shouldn't be a wireless router, right?

Computer Manager Router Manager always has the wrong password: the computer enters the router.

The computer goes into the router.

1. Check the IP first, method: win+r--- enter: cmd--- enter in the black and white interface: ipconfig, press enter.

4. Pop up the router login interface and enter the default login username of the router: admin and password: admin (if it is incorrect, look at the back of the router).

5. The above methods do not work, in the reset router. The address, account number, and password are all on the back of the router.

You can find this account password in the tab at the bottom of the router.

Are you referring to the broadband password inside? If yes, please re-enter, if the error still occurs, then it is a problem with your software itself, and the soft route is not very stable; The second is that there is an error in the data in the operator's computer room, just bring your ID card and go to the business hall to find them to recover or change the password. It doesn't cost a lot of money to buy a route, so why use that soft route?

I've also encountered this, let's see if there's a way to change the password.

Hello, the reason why Router Manager is not working properly.

The following reasons may cause the router manager to be unable to use normally, please confirm whether the following settings are correct:

1.Make sure that the network type is selected correctly (Windows 7 as an example).

1) Please find "Run" (shortcut key win+r) in the start menu, enter name and click OK.

2) Find the network you are connected to in the window that opens, and please confirm whether the network is "Home Network" or "Work Network", if the network type is "Public Network", please click on the text, and in the new pop-up window, change the network type to "Home Network" or "Work Network":

3) After the modification, please turn on Router Manager again.

2.Make sure that the network service is enabled properly (Windows 7 as an example).

1) Please find "Run" (shortcut key win+r) in the start menu, enter it and click OK.

2) Find "SSDP Discovery" in the list of open services and confirm if the service is disabled.

If the status of the service is "Disabled", right-click on the item and click "Properties" in the menu. In the properties window, change the startup type of the service to "Automatic", click Confirm and turn Router Manager back on.

3.Please make sure that the computer can connect to the router normally, that the router is in working order, and that you have administrator privileges to operate the router.

It may be that the management password of the security housekeeper that people say is the password to enter the routing after answering correctly.

If you have never changed your administrator password, enter your username: admin and password: admin in the login box, and then click the login button to log in.

If you have changed the password, enter the username and password you set, and if there are letters, be case-sensitive.

If you have forgotten your username and password, you can reset your router by pressing and holding the reset button on your router. (Note: This will reset the router to its exit settings, and all user settings will be restored).

Needless to say, get the password wrong and restore it to factory value.

Don't use PC Manager, useless software.

If the brand is fine, the username and password will be visible on the label at the bottom of the router.