-
Depending on your driving skills, I recommend outfitting. The car is getting more and more advanced, and if you want to exercise your driving skills, you can also practice step by step, anyway, I don't have a panoramic camera, and I really don't have a bottom in my heart, although I only look at it when I reverse, but it has always felt at ease with me.
-
It must be installed, and there are many inconveniences in relying on the rearview mirror alone. And now there are many cars in the community, there are many children, and there are many dogs, and it is good to accidentally touch the car and touch the dog, and it is good to say that if you touch the child, this life will be over. It is recommended to install it in its entirety, and if you have the conditions to install 360 images, you can also install it.
If you want to practice skills, you can skip these exercises, and there is no need to give up safety and convenience for the sake of practicing skills. It's like I want to eat steamed buns and buy them, but the technology of steaming them has been abandoned, so what?
-
If you don't want to be a professional driver, there is no need to practice this, unmanned driving has begun to be measured on the road!
-
The reversing image is visible, we can see the status of the parking space, and the reversing radar will have a certain blind spot, some sharp objects can not be displayed on the radar, and some relatively high obstacles on the ground can not be displayed by the radar, which may cause damage to the vehicle; In the case of reversing the vehicle, we can clearly see what the situation behind us is, there are stones on the ground, or small pillars can be visually seen, and it can be avoided when reversing.
-
The car now. If there is a condition, it is recommended to install a reversing image, thousands of things, improve a lot of safety, there is a reversing image is not to look at the screen reversing, but to facilitate the observation of whether there are obstacles in the rear.
-
On the right side of the vehicle, male drivers are mostly on the right rear side, and female drivers are mostly on the right front side. Compared with the driving position, the blind spot on the right side is larger, and the rearview mirror, reversing radar, and reversing image all have blind spots that cannot be observed, scanned, or illuminated. The 360° reversing image can completely eliminate blind spots through the bird's-eye view stitched together by 4 cameras.
Male drivers have better control over the front space than female drivers, but they always feel that there is still reversing space behind them, and they want to make full use of the space behind the car and risk reversing, resulting in a scratch on the right rear of the vehicle; Female drivers will have a sense of crampedness in the rear space of the vehicle earlier, and dare not risk continuing to reverse, on the contrary, there is always a "almost" psychology for the front space of the car, but in fact, there is not enough space to scratch the front end of the vehicle.
-
If you have a reversing radar, there is little need for additional images. Among the reversing aids, I think radar comes first, and images come second. Because, when reversing, you not only have to look behind, but also take care of the left and right, and you have to pay attention to the front of the car when reversing in a non-straight line.
Therefore, sound prompts are more practical and safer than screen displays. Of course, if it is a particularly narrow place, the reversing camera can help you make full use of the space and park "seamlessly". This is the advantage of imagery.
Although this can be done according to the frequency of the sound cue of the reversing radar, it requires a familiar process, which is not as intuitive as the picture.
-
Reversing is the most difficult driving technique and the best way to show the driver's driving skills. Because when reversing, the driver is facing away from the direction of the vehicle, often in the distance grasp, angle grasp and other aspects are far from being comparable with normal driving, coupled with the increase in the blind spot of sight, the reversing scratch is more common. Normally, when reversing, the front and rear of the body may be scratched, but the right side and front side are relatively more likely to be scratched.
Because, those places are farther away from the driver, and it is more difficult to judge the distance.
-
If the technology is not good, it is recommended to install a reversing camera. If you're confident in your skills, you can have a reversing radar. Drivers often use reversing cameras, which will have a certain dependence.
Generally, the reversing image is bound to the navigation, and a camera is installed at the rear of the car. When the car is in reverse, the system automatically turns on the camera located at the rear of the car, which is in the center console.
Or the LCD screen of the rearview mirror shows the rear of the car. Although the reversing camera can provide the driver with a real-time view of the rear of the vehicle, it cannot reflect the exact distance between the obstacle and the vehicle.
Conversely, due to the distortion of the camera image, it may even affect the driver's control of the distance. At this time, the accurate feedback of the reversing radar on the distance of the obstacle is particularly important. When considering reversing at night, the image is sometimes blurry, and it is safer with the help of radar.
So, even if you have a reversing image, you can consider installing a radar probe in front of the car. But the radar probe and the reversing camera do not conflict. Radar probes are mostly drilled into the bumper.
, most of the reversing cameras are installed at the license plate lights.
System. This set of reversing images allows you to see a much wider range of the body, from front to rear, from left to right. Moreover, the current 360-degree panoramic reversing image is a collection of multiple functions: reversing image and 360-degree panoramic image.
And it is better to choose brand products, with high clarity and reversing tracks, which will be more secure. Reversing radar is a device that senses obstacles through the radar in the rear (or front), and is a safety aid device when reversing or parking. It is generally divided into front radar (front) and rear radar (rear).
It consists of ultrasonic sensors.
Commonly known as probes), controllers, and displays (or buzzers.
and so on. It can tell the driver about the obstacles around the driver through sound or more intuitive display, and relieve the driver of the trouble caused by patrolling forward, backward, left and right when parking, reversing, and starting the vehicle. The sound of radar proximity warning will allow you to avoid it in time, and you don't need to drive well.
Put the dash cam.
It's enough to pretend to be reversed. There are both front and back images. It can automatically jump when reversing, and it can also prevent touching porcelain. A must-have for basic drivers.
-
It is necessary to install the reversing image, for some novices, there is a coach to teach when taking the driver's license, but after they get started, they will still be a little rusty, the installation of the reversing image can better reverse, to avoid some collisions, so the reversing image is more friendly to novices, and the old driver does not need to install it.
-
I think it is also necessary to install a reversing camera when buying a new car, because novices still don't know much about the situation of the car, so it is necessary to have a reversing camera.
-
I think it's still necessary, because it's much safer to have a reversing camera, and the chance of an accident is smaller.
-
Reversing image introduction:
Reversing image is also known as parking assist system, or reversing visual system, vehicle monitoring system, etc. English name: vehicle-backup-cameraThe system is widely used in a variety of large, medium and small He Hui vehicles reversing or driving safety assistance.
Advantages of inverting an image:
Install a simple Zen cheat answer. Generally, the ordinary single-channel output reversing image only needs to connect the positive pole of the power cable to the positive pole of the reversing lamp, and the negative pole of the power cable to the negative pole or ground (GND) of the reversing lamp. Depending on the type of cable, you can understand how to arrange it through a simple study, and you can install the camera by making a hole in the easy to install position.
Millions of car purchase subsidies.
-
The installation of reversing images in the car 4S shop will cause the car to be not warranted at the route level, and there is no other problem, but if the car appears on the route, the cause of the vehicle's spontaneous combustion is found to be related to the route, and the car 4S shop can also not recognize the problem of installing the danger of reversing; However, this problem can be prevented if it is installed in the jewelry store outside, and the price will be more cost-effective than the car 4S shop, but now there are some reversing Yingqing Cong who does not need to destroy the original route, and can install the power plug in the ** position at the same time.
Although there are some car buyers who have a longer car age, and the driving technology is also very high, feel that the reversing image regrets, but in fact there is still a significant difference between the reversing image and the reversing image without safety, the same as the car has ESP and no ESP car body stability system software, there is basically no difference between all normal application and no ESP, but there is ESP more safety at a critical juncture, and the car of the reversing video is the same.
From the perspective of safety, there is a reversing image on it, which can reasonably avoid the car being scratched, and it is safer when reversing; At the same time, for some beginners or female drivers to stop driving, there are reversing images to better face a variety of complicated reversing natural environment, and will not be due to not understanding the reversing natural environment while reversing while poking out the risk posture of observation, so the reversing image is also particularly high in applicability at a critical juncture, and the reversing assistant is reassuring and reassuring.
And the installation of reversing images is not expensive, and the vast majority of car jewelry stores are also a few hundred yuan to install one; Reversing camera, also known as parking assist system software, has been continuously upgraded and improved to be applied to a variety of vehicles such as large trucks, buses, cars, and combine harvesters, and is relatively one of the most suitable equipment.
Millions of car purchase subsidies.
-
According to the electric state, some car owners, at the same time in the car equipped with radar and reversing image, but after getting used to the reversing image, may rely on it, it is difficult to adapt to the car without reversing image. Some car owners are equipped with radar and image, because the radar can only hear the sound can measure the obstacle distance, and the reversing image uses a far-infrared wide-angle camera device, through the display screen in the car, the obstacles behind the car are clearly visible. Therefore, I would like to introduce to you "Is the reversing image useful, and how to use the reversing image".
Is the reversing camera useful - Precautions:
1. When reversing, when the lower edge of the left middle window sees the center of the wheel of the other car, the left side is about a meter away from the left car;
2. When reversing, the middle window on the right side is vertical in the middle, and when you see the center of the wheel of the other car, the right side is about 1 meter away from the left car;
3. When reversing, when the rear end of the bumper on the rear tire is seen in the rearview mirror and the parking line is aligned, the rear of the car is about one meter away from the parking line;
If you see the stop line five centimeters from the front door angle through the window in the car, the car is aligned with the stop line.
Is the reversing image useful - how to see the reversing image:
1. The car shadow occupies all the rearview mirrors, and the car distance is 3 meters;
2, the car shadow occupies the rear-view mirror 2 3, the car distance is 5 meters;
3, the car shadow occupies 1 2 of the rear-view mirror, and the car distance is 9 meters;
4, the car shadow occupies 1 3 of the rear-view mirror, and the car distance is 12 meters;
5, the lower edge of the front windshield, see the upper edge of the rear bumper of the front car, the distance between the car is 1 meter;
6. The lower edge of the front windshield, see the lower edge of the rear bumper of the front car, and the distance between the vehicles is 2 meters;
7, the lower edge of the front windshield, see the lower edge of the rear tire of the front car, the distance between the car is 3 meters;
8. The front stop line and the left front door angle are aligned at 5cm, just not crossing the line;
9. On the lower edge of the front windshield, see the middle of the lower leg of the pedestrian in front of you, and the front is about a meter away from the person;
10. On the lower edge of the front windshield, see the pedestrians in front of you on their knees, and the front is about 1 meter away from the person;
11. In the lower left corner of the front windshield, you can see the pedestrian arm, and the side is about a meter away from the person;
12. In the lower right corner of the front windshield, you can see the pedestrian arm, and the side is about a meter away from the person;
13. In the lower left corner of the front windshield, you can see the pedestrian under his knees, and the side is about a meter away from the person.
Is the reversing image useful--judging the distance between the vehicles:
1. See the upper edge of the rear bumper of the front car - the distance between the cars is 1m;
2. See the lower edge of the rear bumper of the front car - the distance between the cars is 2m;
3. See the lower edge of the front and rear tires - the distance between the vehicles is 3m;
-
Tell you how to use the reversing image in an all-round way.
-
There is no harm to the car when the car is installed and reversing, as long as the original wiring of the car is not damaged during the installation process, and the warranty is not affected. It is best to go to a regular tuning shop for installation. The main functions of the reversing image:
When the driver is reversing, he can see the situation behind the car on the display, which avoids the accident caused by the driver not seeing the situation behind the car when reversing, so that the driver can reverse more safely.
Automobile reversing image is a kind of automobile system, is a safety assistance device when the car is parked or reversing, can inform the driver of the surrounding obstacles with image display, relieves the driver of parking, reversing and starting the vehicle when the problem caused by the front and back left and right visits, helps the driver to sweep away the defects of blind spots and blurred vision, and improves the safety of driving.
The reversing image is simple to install, and the reversing image of the ordinary single-channel output only needs to connect the positive pole of the power supply cable to the positive pole of the power supply of the car reversing light, and the negative pole of the power connection line can be connected to the negative pole of the reversing lamp or grounded. According to the different models, you can understand how to arrange the cable by simple research, and the camera can be installed in a hole that is easy to install.
Photo by Tong Fei of Pacific Automobile Network).
-
I believe everyone knows more or less that some so-called old drivers and car owners are very disdainful of reversing images. It is even thought that the use of reversing images is a shame on your driving skills, and that truly skilled "car gods" do not need reversing images. So is the reversed image really as bad as they say Ye Xun?
Let's talk. Is it really useful to invert an image? Is it necessary to pretend to be a stool?
The reversing image captures the rear of the vehicle in real time through the rear camera and is displayed on the center display. At this time, our driver can intuitively observe the real situation behind the vehicle according to the screen image, which can greatly improve our parking safety and has extremely high practical value.
At the same time, many reversing images are equipped with a reversing trajectory system, that is, two dotted lines on the screen to simulate the rail ridge of the wheel, which will deflect with the rotation of the steering wheel, thereby further improving our parking safety.
Is it necessary to install a reversing camera?
At present, the reversing camera function is gradually being devolved to some low-end models. It is believed that in the near future, the reversing camera is expected to become a standard feature of the vehicle.
For vehicles that are not equipped with reversing images, and at the same time have doubts about their own parking technology, it is still necessary to install a reversing image function in the later stage.
Millions of car purchase subsidies.
The phenomenon of black screen in the reversing image is likely to be due to poor line contact, and it is necessary to check the wiring between the line and the vehicle installation in time to see if there is a false connection. If there is, it will naturally lead to the situation that the reversing image is not working at any time, and even a direct black screen is possible, at this time, as long as the virtual part is connected well. Of course, it may also be because the power cord is aging, you can try to replace it with a new power cord, if the black screen can be solved, it means that there is indeed a problem with the power cord.
Installation steps: First, remove the power supply cable at the vehicle battery, and place the removed wire away from the electrodes to prevent the power supply from being accidentally connected. >>>More
Installing the Bowen Bowon reversing camera under normal circumstances, there are auxiliary lighting of license plate lights, small lights, and reversing lights, so it is rare that there will be no light source at all. The chip's camera is self-sensitive, which means that the more sufficient the light source, the better the effect of the chip's self-sensitivity adjustment, and the better the clarity will naturally be. If you're in total darkness and you can't see your fingers, even a multi-million night vision camera won't be what you'd expect. >>>More
Hello, the individual reversing image kit** is relatively cheap, and it is sold on all major online platforms. >>>More
This wiring is simple. The line that transmits the best signal is the coaxial cable, which we simply understand and is the same as the cable of the CCTV at home. After this kind of wire is opened, there will be two layers of sheath, and the outer sheath protects a circle of copper wire (shield, which can be understood as a negative electrode). >>>More