-
But please note that this will format your SD card, so be careful!
Back up important data ahead of time.
If the following figure appears: (it means that there is no SD card, and the space is insufficient), of course, this operation is also to click "Empty internal memory card" --Empty "--Next", but I do not recommend the operation.
Reason 2: The wifi fails to start, and you can only restart the phone to try again.
Or: If you don't find wifi, you can only check your wifi, and in this case, you should first check whether there is an available hotspot on your router or nearby.
The default wifi connection failed, wifi is not commonly used, change wifi at this time can only re-enter the new wifi password, the operation is as follows: select the current wifi name--- enter the secret (click on the small eye on the right is the secret visible) and click "connection".
After the above is completed, there will be the following picture, so that your wifi will be reconnected! Note that you must make sure that the Wi-Fi you are connected to can be connected to the Internet normally, and does not require web portal authentication, for example, check whether your other devices (such as pads) can access web pages under the Wi-Fi connection, and do not require web portal authentication.
It is best not to use public WiFi, because first of all, some public WiFi cannot be connected to the Internet, and secondly, the emergency recovery system does not support web portal authentication (that is, after connecting to a WiFi hotspot, you also need to authenticate by visiting a web page), and users cannot use WiFi hotspots certified by this way.
-
1. Back up your data first, restore factory settings, and try: go to Settings, General More Settings, Restore Factory Settings, and restore all settings (Restoring all settings will lose all data).
2. If it is the same after recovery, it is recommended to contact the official after-sales service center and the engineer will help check whether the hardware is faulty.
-
If it doesn't work, let's change the phone again, the most useful way!!
-
Line brush, if you really can't find after-sales.
-
It's better not to use public WiFi, because first of all, some public WiFi cannot be connected to the Internet, and secondly, the emergency recovery system does not support web portal authentication (that is, connected to WiFi
-
If the connection to the hotspot fails, in this case, turn off the hotspot first and then restart the phone.
-
You can directly go to the settings, then select the wireless network settings, and then restore your wireless network separately, so that you can connect to the hotspot of this wireless network, and you can directly connect successfully.
-
Hello, according to your description, the phone fails to link wifi in erecovery mode, it is recommended to confirm whether the password is correct; In addition, you can try to change other wifi links.
-
In this case, it should be your wifi password that you have entered incorrectly, and you can re-enter the wifi password, or maybe a few times.
-
Hello! If you fail to upgrade the system by following the prompts in System Recovery or connecting your phone to the Huawei Mobile Assistant.
-
You may have pressed the wrong button to restore factory settings, looking for Cancel Exit.
-
Other operations or misoperations were performed during the system BAI upgrade.
After that, the system upgrade failed.
As one of Huawei's three core businesses, Huawei's consumer business began at the end of 2003 and has set up 16 R&D centers in China, Russia, Germany, Sweden, India and the United States. In 2015, Huawei was selected as one of the top 100 most valuable brands in the world by Brand Z, ranking 16th among brands in the technology field.
On July 31, 2018, preliminary data released by the International Data Corporation, a market analysis agency, showed that in the second quarter of 2018, Huawei's shipments surpassed Apple's mobile phones, ranking second in the world.
On July 17, 2019, on the official website of the China Quality Certification Center (3C certification), 8 5G mobile phones obtained 3C certification, including four mobile phones including Huawei Mate 20 X 5G and Mate X 5G.
As of October 22, Huawei has shipped more than 200 million mobile phones in 2019. On March 31, 2020, Huawei released its annual report showing that in 2019, Huawei's smartphone shipments (including Honor) reached 100 million units, a year-on-year increase, making it the world's second largest mobile phone manufacturer.
One: Press F1 basically because the battery in your computer is dead, you can dig it out and put it back in for a while. (If it doesn't work, you have to change the battery) The second reason is that your machine may not have a floppy drive, or the floppy drive is broken, but your BIOS also detects the floppy drive, so it prompts you to press F1 to enter the system every time. >>>More
1. Step 1: The reason for this is that the system is not yet stable. What we have to do is click on the advanced settings first. >>>More
On the desktop, right-click on the properties, click on the desktop, define the desktop in Braille, and just tick on it. >>>More
I think there may be something wrong with this file of yours. You can copy this file from another machine to your C drive. Here's how you can do it: >>>More
The installation method of HarmonyOS system update for Huawei mobile phones is as follows:Device: Honor 10 >>>More