Rail lift manufacturers tell you what are the characteristics of the rail lift

Product introduction: Monorail rail lift freight elevator is a non-scissor hydraulic lifting mechanical equipment used for the transmission of goods between two and three floors of industrial plants, restaurants and wine floors, with a very low height of 150-30 mm, especially suitable for workplaces that can not excavate pits and do not need upper hanging points, diversified forms (single column, double column, four columns) Also equipped with: relief valve:

It can prevent the system pressure from being too high during the upward movement, emergency manual valve: when the power supply fails, the car can be made to drop to the nearest floor position to open the door, hand pump: when the system fails, the hand pump can be manipulated to play high-pressure oil to make the car rise to the nearest floor position; Line rupture valve:

When the hydraulic system pipeline is ruptured, when the car stalls and descends, the oil circuit can be automatically cut off to stop the descent. Fuel Tank Oil Temperature Protection: When the oil temperature in the oil tank exceeds the standard set value, the oil temperature....

Rail type hydraulic lift features:

1. The maximum load is 5 tons, which realizes multi-point control, and the upper and lower floors are interlocked to achieve safe use;

2. The lifting height is high, and the side cylinder or double-sided cylinder is adopted, which is stable in operation, noiseless, easy to maintain, and has a long service life;

3. Power failure manual lowering and emergency stop button, convenient, fast and practical;

4. The floors can be connected, and the inside and outside of the plant can be poked open with each other, which is convenient and space-saving;

5. It is especially suitable for 2-5 storey steel structure workshops, which can be used both inside and outside;

6. The pumping station adopts imported pumping station, if the speed requirement is too high, the imported customized pumping station is used to meet the ideal delivery requirements;

7. The oil cylinder and seals are imported parts to solve the problem of unstable oil pressure and oil leakage of parts and components;

8. Only need to dig a pit of more than ten centimeters to ensure the convenience of goods in and out, and facilitate the installation and use of equipment;

9. Hydraulic cylinders, special heavy-duty chains, and multiple protections ensure the safety of equipment operation and use;

10. The slope treatment can be directly used without the pit, which greatly facilitates the installation and use of the equipment space and field.

Speaking of lifts, I believe you have seen such a lift in many factories and restaurants that are renting vertical decorations: it can freely transport goods between the factory and the restaurant floor, and the upper part does not need to be hoisted, and the form is also beautiful. That's right, it's a rail lift, today I will focus on introducing this kind of lifting equipment in the decoration, if you are interested, just look at it!

What is a rail lift.

The rail lift is a kind of non-fork-reducing hydraulic mechanical equipment, commonly used in construction sites and other places, it requires a relatively low height, can be conveniently operated in the two or three floors of the plant and restaurant, in general, its minimum height is between, but its application has a large limitation, such as in the excavation of the pit workplace, it is not very applicable. Although in appearance, the rail elevator has a single column, double column, multi-column, the form is very diverse, but the number of columns does not affect the smooth operation of the equipment. It's just as easy and reliable to operate.

Advantages of Rail Lifts:

For the guide rail lift, due to its hydraulic characteristics, when the power supply fails, the car can automatically drum down to the nearest floor position to open the door immediately, so it is much higher than other lifts in terms of safety and stability, and secondly, its cost is also very low, and the advanced nature of the hydraulic system makes its failure rate in a low state, so it reduces many later maintenance costs.

In addition, the rail elevator has the civil engineering advantages that other elevators do not have, and above the hoistway, the rail elevator does not need a special machine room, and only needs to be more than 4 meters higher than the top floor to be installed and used. Finally, let's talk about the stability of the rail lift, because the rail stool Xiang lift has a relief valve, so when the lift is moving, if the pressure of the system is too high, the relief valve can be effectively controlled. Secondly, its operating cost also has a disadvantage of coarse and fixed, when the hydraulic elevator goes down, the self-weight can produce a great pressure drive, so it can achieve the purpose of energy saving.

Well, after talking so much about the knowledge of the guide rail lift, I don't know if you have improved your knowledge of this field to a higher level, and finally remind you that the elevator is easy to use, but don't overuse it, we must not only regularly check the wires and cables of the elevator, but also check whether the wire rope of each part is loose, so as to ensure that the guide rail lift is used for us for a longer time!

You can get it for free

Now with the continuous development of industry, people in the factory in order to pursue more interests, now in the factory in the way of processing their own goods transport has a lot of convenient methods, we use the most or the freight elevator method, and the guide rail lift freight elevator method has a lot of benefits, can bring great benefits to people, so what are the guide rail lift freight elevator manufacturers? Today, I will introduce to you the problems of guide rail lift freight elevator manufacturers, you should listen carefully!

Introduction of guide rail lift freight elevator manufacturers

1.Jinan Shuangkai Machinery Co., Ltd. is a company specializing in the production and processing of lifts, sawing machines, lifting stages, boarding bridges and other products, with a complete and scientific quality management system. Jinan Shuangkai Machinery's integrity, strength and product quality have been recognized by the industry.

2.Jinan Strong Lifting Machinery **** is a professional production of hydraulic lifting machinery enterprises, is a member of China's logistics industry, the company's main products are mobile, fixed, aluminum alloy, guide rail, truck-mounted hydraulic lift and logistics hydraulic boarding bridge and other six series of more than 50 varieties.

3.Yishui Yiliyuan loading and unloading machinery manufacturing plant is a manual hydraulic lifting truck, repair platform, manual hydraulic pallet truck, conveying equipment, lifting platform, multi-functional seeder and other products specializing in the production and processing of individual operations, the company is headquartered in Yishui County, Shandong Province Chengbei Industrial Park, Yishui Yiliyuan loading and unloading machinery manufacturing plant has a complete and scientific quality management system.

4.Jinan Guanding Machinery Equipment Co., Ltd. is a manufacturer specializing in the research and development, design, production, sales and service of hydraulic lifts, hydraulic lifting platforms and aerial work platforms. Products throughout the industrial and mining enterprise workshop, warehouse station, highway, high-rise cleaning, maintenance, logistics and warehousing, communications, airports, port shipments and other fields.

According to the requirements of the customer, the non-standard automation equipment is customized to solve the high labor cost of the customer, so as to help the customer improve the core competitiveness of the market.

Introduction of guide-rail lift freight elevator**

Well, these are the questions about the guide rail lift freight elevator manufacturers, which can bring benefits to people to a great extent. And with this method can be a lot more convenient, the general transport of goods this kind of thing is more tired, people do this kind of work are more dirty and tired, so through the guide rail lift freight elevator this method can be convenient for people, blue socks can also improve efficiency, why not.

You can get it for free

The main structure and function of the guide rail lift: the mechanical part of the guide rail lift mainly includes three parts: the lifting device, the track device and the belt change device, of which the lifting device is mainly used to suspend the person being lifted, which is the core part of the whole mechanism, the role of the track device is mainly to provide the moving track, so that the operation is smoother, and the belt change device is used to switch the track when the elevator wants to pass through the door. The internal structure of the lifting device is mainly composed of a gear mechanism, a bracket, a worm gear and worm, a guide mechanism, a boom, an upper and lower shell, etc.

The gear mechanism mainly includes large and small pinions, belt pulleys, central shafts and safety devices composed of stop buckles and torsion springs.

The selection of closed gear transmission, large and small pinions are made of steel, after quenching and tempering, belongs to the soft tooth surface, because the common failure mode of closed soft tooth surface gear transmission is tooth surface pitting, according to the tooth root bending fatigue strength check. The bracket is used to fix and support all the mechanical parts and some electrical components inside the elevator box, which is mainly welded by the side plate, connecting pipe and connecting piece and other parts, and the materials are selected, in which the thickness of the two sides of the plate, and at the same time, in order to reduce the weight of the bracket, a lot of process holes are designed on the two sides of the plate. Worm gear and worm mechanism has the advantages of large transmission ratio, compact structure, small impact load, stable transmission and low noise, and has the characteristics of reverse self-locking.

It can ensure that in the process of handling patients, the transmission mechanism can be self-locked when the motor is powered off, so the worm gear reducer is selected. The involute worm is used, the material is steel, and the spiral surface is quenched to improve the transmission efficiency and increase wear resistance, and the worm gear material is polyoxymethylene. Plastic worm gear has the advantages of good processing economy, stable transmission, vibration absorption and noise reduction, light weight, wear resistance and self-lubrication.

The guide mechanism is mainly composed of parts such as the guide plastic pipe, the guide bracket, the compression spring, the safety plug, the guide shell and the guide shaft, the half-section view of the guide mechanism, a narrow slit is formed between the two guide plastic pipes, and the lifting cloth belt stretches out of the box from this narrow slit to prevent the cloth tape from rolling up and plays the role of guidance. The safety plug is supported by a guide bracket and a compression spring, and in order to prevent the compression spring from losing stability after being stressed, a small guide rod is designed on the safety plug, and the gap between the small guide rod and the spring is designed with reference to the table. The boom shaft is welded, a boom hook is installed at both ends respectively, the material is selected, the quenching and tempering treatment is carried out, and the hook of the lower shell of the box body constitutes three suspension points, the lifter is lifted by the soft support spreader, the load-bearing arm of the boom, in order to make the lifter be able to be in a comfortable state when riding, the relevant data of the horizontal size are listed in the reference table of the two boom hook spacing as a design reference, the balance bar is used to maintain the balance of the lifting device, and the material is designed to be hollow tubular shape, and the weight of the boom as a whole is reduced.

The guide rail lift is a kind of non-scissor hydraulic lifting mechanical equipment, which is used for the transfer of goods between the floors of the second and third floors of industrial plants, restaurants and restaurants, and the minimum height is 150-300mm, especially suitable for workplaces that cannot excavate pits, and there is no need for upper hanging points, and the forms are diversified (single column, double column, four columns).The equipment runs smoothly, and the guide rails of the guide rail elevator are generally made of channel steel, I-beam, and square tube welding, which is simple and reliable in operation, and economical and convenient in cargo transmission

The guide rail hydraulic lift is not the same as the guide rail of the elevator, there are generally two kinds, one is welded by square pipe, and the other is H-shaped steel!

National standard 10 I-beam, on the sea z bull z force z machine z, remove"z"That's the answer.

Roller guides can be used, which are dirt-resistant and flexible. Our company uses nadella rollers. Nadella has a company in Shanghai, and you can search for it on the Internet.

Yuxuan elevator with H steel.

1. The guide-rail lifting platform should carry the goods in accordance with the technical requirements, and it is strictly forbidden to overload and overweight, and it is not allowed to carry people.

2. There should be guardrails or other protective structures around the guide rail platform, with a height of not less than 900mm and a width of not less than 450mm.

3. The guardrail structure should be able to withstand the external force of 360N m acting on the top guardrail or the middle railing in the horizontal direction, and the guardrail terminal support should be able to withstand 900N external force from the top of the pole in all directions.

Fourth, the door at the entrance and exit of the guide rail lifting platform shall not be opened outward, and the door can also be replaced by railings, chain barriers or other effective facilities, with a width of not less than 350mm.

5. The lifting platform for live operation shall be insulated on the supporting ground or an insulated platform shall be adopted, and the insulated platform shall indicate the insulation voltage and its detection period on the platform. The lifting platform should be equipped with eye-catching signs of the rated load of the platform and the maximum platform height.

6. When the wire rope or chain bears the rated load of the working platform, the safety factor of the wire rope or chain shall not be less than 8.

Operate in strict accordance with the instruction manual of the hydraulic lift, and illegal operation is strictly prohibited.

It is strictly forbidden to transport ** in a closed garage for a long time. Carbon monoxide is present in the exhaust gases from the engine of the hydraulic lift. It is a toxic gas that is exposed to low concentrations of carbon monoxide gas for a long time.

It can cause symptoms such as headache, shortness of breath, nausea and vomiting, weakness and dizziness, mental confusion and even brain damage. In severe cases, it can cause death, such as starting the engine of a device in a garage. The garage door should be opened or the exhaust unit should be turned on.

In order to exhaust the exhaust gases out of the garage at any time. Even if it is operated in the open air. Also do not linger near a working engine exhaust pipe for long periods of time.

It is strictly forbidden to damage the hydraulic lift. Brake fluid has a damaging effect on the paint film of the hydraulic lift. It dissolves the paint film very quickly. Meantime. Brake fluid is also harmful to the eyes, Jinan Lichuan Lift reminds everyone that if it splashes into the eyes, it must be rinsed with water immediately.

Attention must be paid to the rotating parts of the hydraulic lift. When the engine is running. Hands and tools must be kept away from rotating fan belts and fans. During the test, it must be in a wide place, and the hydraulic lift must be safely parked and steered effectively.

Test run or finished. The hydraulic lift and the site must be cleaned. When closing the motor cover or other assembly cover of a hydraulic lift. Items such as tools, rags, and removed parts should be checked for forgetting. After confirming that it is correct. before it can be turned off.

Work on a hydraulic lift table. Seat belts, hard hats and other tools must be worn in case of accidents.

Drunk driving is strictly prohibited, and work at height should be terminated if you feel unwell.

It is strictly forbidden to overload or long-term eccentric operation, which will not only reduce the service life, but also have potential safety hazards.