What are the characteristics of the guide rail lift freight elevator and the system of the hydraulic

It can tailor a high-efficiency delivery platform, the product hydraulic system is set up with anti-falling, the upper and lower doors are interlocked, and the operation buttons can be set on each floor and the working surface of the lifting platform to achieve multi-point control. The product has a solid structure, large carrying capacity, stable lifting, simple and convenient installation and maintenance, and is an ideal cargo conveying equipment for replacing elevators between low floors in an economical and practical manner. According to the installation environment and use requirements of the lifting table, choose different optional configurations, can achieve better use results, this product is mainly used in chemical industry, high temperature, high pressure, power plants, nuclear industry bases, explosives and other explosion-proof enterprises.

The maximum load is 10 tons, which realizes multi-point control, interactive interlocking of upper and lower floors, and achieves safe use; The lifting height is high, and the side cylinder or double test cylinder is adopted, which runs smoothly, no noise, is convenient for maintenance and has a long service life; Power failure manual lowering, emergency stop button, convenient, fast and practical; The depth of the pit is generally 15cm-30cm, and the height of the top layer is not limited, which can be customized according to the site environment; The floor door can be penetrated, and the inside and outside of the plant can be poked open with each other, which is convenient and space-saving; It is especially suitable for 2-3 storey steel structure workshops, which can be used both inside and outside; The pumping station adopts imported pumping station, if the speed requirement is too high, the imported customized pumping station is used to meet the ideal delivery requirements, the cylinder and seal are imported parts to solve the problem of unstable oil pressure and oil leakage of parts and components, and electrical parts are optional, (Shanghai People's Electric, French Schneider, German Siemens).

While the hydraulic elevator has the safety device of the traditional traction elevator, it is also equipped with: relief valve: which can prevent the system pressure from being too high during upward movement, and emergency manual valve:

When the power supply fails, the car can be made to descend to the nearest floor position to open the door, and the manual pump: when the system fails, the hand pump can be manipulated to play high-pressure oil to make the car rise to the nearest floor position; Pipeline rupture valve: When the hydraulic system pipeline rupture car stalls and falls, it can automatically cut off the oil circuit to stop the descent.

Fuel tank oil temperature protection: When the oil temperature in the oil tank exceeds the standard set value, the oil temperature protection device will signal to suspend the use of the elevator, and the elevator can be started only after the oil temperature drops.

Low failure rate: Due to the use of advanced hydraulic system and good control mode, the failure rate of elevator operation can be minimized. Low power consumption: When the hydraulic elevator goes down, it is driven by the pressure generated by its own weight, which greatly saves energy.

It is only necessary to dig a pit of more than ten centimeters to ensure the convenience of goods in and out, and to facilitate the installation and use of equipment.

Hydraulic cylinders, special heavy-duty chains, wire ropes, and multi-slave protection ensure the safety of equipment operation and use.

Hydraulic cylinders, special heavy-duty chains, wire ropes, and multi-slave protection ensure the safety of equipment operation and use.

It can be directly treated by slope without pit, which greatly facilitates the installation and use of equipment space and occasions.

The guide-rail lift freight elevator is a non-scissor hydraulic lifting mechanical equipment. It is used for the transmission of goods between the floors of the second and third floors of industrial plants, restaurants and restaurants. The minimum height is 150-300mm, which is suitable for workplaces where pits cannot be excavated.

And there is no need for upper hanging points, and the forms are diversified (single column, double column, four columns). The equipment runs smoothly, the operation is simple and reliable, and the cargo transmission is economical and convenient.

According to the operation mode, the stationary hydraulic lift products can be roughly divided into scissor type, double scissor type, guide rail type, sleeve cylinder type, wall-mounted type, etc. Novel design, double ladder anti-rotation structure, two-speed descending system, maximum height of 35 meters, stable, reliable, beautiful, easy to operate is the biggest feature of the sleeve cylinder type fixed hydraulic lift. The double-ladder anti-rotation structure ensures the safety and stability of the operation.

In addition, considering the actual environment of the site, the lifting cylinder can be dumped to ensure the maximum range of machine operation. The sleeve cylinder fixed hydraulic lift is a multi-stage hydraulic cylinder that rises upright, the hydraulic cylinder is made of high-strength material and good mechanical properties, and the tower-shaped trapezoidal guard frame makes the lifting platform have higher stability. Even at an altitude of 20 meters, you can feel its superior smooth performance.

Applicable occasions: factories, hotels, buildings, shopping malls, stations, airports, stadiums and other main uses: installation and maintenance of power lines, lighting appliances, elevated pipelines, etc., high-altitude cleaning and other one-person work of aerial work.

It is suitable for the workplace where the pit can not be excavated, and the chain gear is used to pull up the height, with single and double collapse, and an efficient guiding system is adopted, so that the gap between the lifting platform and the fixed platform in the translation process is small, the operation is stable, and the speed changes steplessly. The synchronous device adopts low-speed and large-torque drive, so that the lifting process is absolutely parallel, free, and telescopic in place, and can automatically realize leveling. The elevator is stable, safe and reliable, and is suitable for supermarkets, hospitals, restaurants, workshops and other industries.

Rail-type double-column hydraulic lift freight elevator.

According to the type, the elevator can be divided into: scissor elevator and guideway elevator. The lifting height of the lift freight elevator ranges from 1 meter to 20 meters, and the lift freight elevator with special specifications can be customized according to user requirements.

Sleeve cylinder lift freight elevator: It is a kind of multi-purpose aerial work machinery, and its function is to send the platform carrying workers and equipment to the specified height for aerial operation. This kind of equipment is widely used in industrial and mining workshops, high halls, warehouses, stations, squares and other aerial operations.

The whole machine is composed of a platform, a telescopic cylinder, a single ladder or a double ladder anti-rotation mechanism, a chassis fuel tank, outriggers, walking wheels, etc. The platform has a telescopic cylinder to directly jack up, when the motor is started, there is a motor to drive the gear pump to supply oil, the oil is input into the oil cylinder through the check valve and the electromagnetic channel, the telescopic cylinder rises section by section, when the platform rises to the maximum height, the system pressure also reaches the rated working pressure, at this time there is an oil overflow valve unloading, the oil pressure is kept at a constant working pressure, the check valve is pressurized after the shutdown, the platform stays in the maximum working position, and the platform can stay at any position below the maximum height according to the working height of the site.

Aluminum alloy elevator freight: using high-strength and high-quality aluminum alloy materials, it has the advantages of beautiful appearance, small size, light weight, stable lifting, safety and reliability. Widely used in factories, hotels, restaurants, stations, theaters, exhibition halls and other places, it is the best safety companion for maintenance of machinery, paint decoration, replacement of lamps, electrical appliances, cleaning and maintenance.

Rail lift freight elevator manufacturers:

1. Guangzhou Baiwang Lifting Machinery ****.

The company is a domestic enterprise integrating manufacturing, research and development, and is currently concentrating on the field of hydraulic lifting platform. The company's main products are: shear and plug mobile lifting platform, shear and plug fixed lifting platform, sleeve cylinder lifting platform, aluminum alloy straight arm lifting platform, folding arm lifting platform, curved arm lifting platform, vehicle-mounted lifting platform, traction lifting platform, etc.

2. Jinan Shenghan lifting machinery.

The company is a production and processing company of lifts, lifting platforms, freight elevators, lifting equipment and other products, and has a complete and scientific quality management system.

3. Zhejiang Huaqi Heavy Machinery****.

The company specializes in sales, forest limb installation, transformation, maintenance of various single and double girder cranes, electric hoists and other lifting equipment, the company's quality, good image to occupy the domestic and foreign markets, the formation of a huge sales network and customer groups, in the same industry has a very high competitiveness.

4. Hefei Tadisen Electromechanical ****.

The company is a professional manufacturer specializing in the production of freight elevators, food elevators and elevators. Product performance and quality are guaranteed.

5. Jinan Qingrui Hydraulic Machinery ****.

The company specializes in the sales, installation, transformation, maintenance and maintenance of various single and double girder cranes, electric hoists and other lifting equipment, and is equipped with various types of lifting accessories.

Now with the continuous development of industry, people in the factory in order to pursue more interests, now in the factory in the way of processing their own goods transport has a lot of convenient methods, we use the most or the freight elevator method, and the guide rail lift freight elevator method has a lot of benefits, can bring great benefits to people, so what are the guide rail lift freight elevator manufacturers? Today, I will introduce to you the problems of guide rail lift freight elevator manufacturers, you should listen carefully!

Introduction of guide rail lift freight elevator manufacturers

1.Jinan Shuangkai Machinery Co., Ltd. is a company specializing in the production and processing of lifts, sawing machines, lifting stages, boarding bridges and other products, with a complete and scientific quality management system. Jinan Shuangkai Machinery's integrity, strength and product quality have been recognized by the industry.

2.Jinan Strong Lifting Machinery **** is a professional production of hydraulic lifting machinery enterprises, is a member of China's logistics industry, the company's main products are mobile, fixed, aluminum alloy, guide rail, truck-mounted hydraulic lift and logistics hydraulic boarding bridge and other six series of more than 50 varieties.

3.Yishui Yiliyuan loading and unloading machinery manufacturing plant is a manual hydraulic lifting truck, repair platform, manual hydraulic pallet truck, conveying equipment, lifting platform, multi-functional seeder and other products specializing in the production and processing of individual operations, the company is headquartered in Yishui County, Shandong Province Chengbei Industrial Park, Yishui Yiliyuan loading and unloading machinery manufacturing plant has a complete and scientific quality management system.

4.Jinan Guanding Machinery Equipment Co., Ltd. is a manufacturer specializing in the research and development, design, production, sales and service of hydraulic lifts, hydraulic lifting platforms and aerial work platforms. Products throughout the industrial and mining enterprise workshop, warehouse station, highway, high-rise cleaning, maintenance, logistics and warehousing, communications, airports, port shipments and other fields.

According to the requirements of the customer, the non-standard automation equipment is customized to solve the high labor cost of the customer, so as to help the customer improve the core competitiveness of the market.

Introduction of guide-rail lift freight elevator**

Well, these are the questions about the guide rail lift freight elevator manufacturers, which can bring benefits to people to a great extent. And with this method can be a lot more convenient, the general transport of goods this kind of thing is more tired, people do this kind of work are more dirty and tired, so through the guide rail lift freight elevator this method can be convenient for people, blue socks can also improve efficiency, why not.

You can get it for free

The guide rail is a component for the elevator car and the heavy noise.

a.That's right. b.Mistake.

Correct Answer: a

To be precise, it cannot be called a guide rail chain lift freight elevator, but a guide rail chain lift, because the lift and the lift freight elevator are completely different. Pay attention to the following points when purchasing.

First, is it not a manufacturer (there are quite a lot of leather bags now) and second, does the state allow this company to produce.

Third, can the company's after-sales service keep up?

Fourth, how about the quality of the product.

Fifth, how (can not blindly covet **low, low**, the quality is not good, carefully considered) the last point is how to serve the attitude.

I wish you a happy device as soon as possible.