The F disk cannot be opened, and the prompt The file or directory is corrupted and cannot be read

If the F drive is your removable disk, it means that the USB flash drive is broken.

In this case, you can try to use AuroraDataRecovery software to recover file data by following the specific steps as follows

1. After opening the auroradatarecovery software, double-click the partition that needs to be recovered, then unzip it and right-click the software icon to select the software "Run as administrator" software (if it is an XP system, you can directly double-click to open the software).

2. After the program is opened, double-click the partition that needs to be recovered.

3. After the software scans the data, it will be placed in the same directory as the label of the leather beam coil to be recovered.

4. Tick the data to be recovered, right-click and select "Copy the checked file", and the program will copy the checked file.

5. The last step is to wait for the software to copy the data. If the problem persists, we recommend that you repeat the above steps and try again.

**How to open a file that is damaged and unreadable when the file or Paison directory is corrupted and cannot be read ProHello 1, when the mobile phone SD card or U disk is inserted into the computer, if the message "file or directory is corrupted and unreadable" is displayed, we first need to repair the directory of the mobile phone SD card or U disk. Insert the USB flash drive to be repaired, open "My Computer", and find the drive letter where the SD card or USB flash drive is located. 2. Open the "Run" window (you can directly press "Windows+R" to open it), enter "cmd" and click the "OK" button to enter the command prompter interface.

3. From the "Command Prompt" window that opens, type "chkdsk i: f" and press enter to repair the operation. where "i:

Indicates the drive letter where the SD card or USB flash drive is located. 4. When the repair of the USB flash drive is completed, you can open the "computer" again, and you will find that the capacity of the USB flash drive can be displayed normally. This indicates that the repair of the USB flash drive is successful!

If my answer is helpful to you, please give a thumbs up (comment in the lower left corner), and look forward to your thumbs up, your efforts are very important to me, and your support is also the motivation for my progress. Finally, I smile again and wish you good health and a happy mood!

Open the Run window. Right-click the Windows icon in the lower left corner of the desktop, find "Run" in the pop-up box, and click to enter (the Windows shortcut key is Win + R).

Enter the cmd command.

Enter the chkdsk f: f command in the command panel, and press enter after entering the command.

See if it works properly after repair.

Generally, such a situation is basically a data error caused by the hard disk enclosure, and there are several aspects, first.

First, you have a mistake in the operation, the correct operation is to remove the device first, prompt you can remove the device when you unplug the hard disk box, if you often do not use this method to forcibly pull out the hard disk, very Rong Yi caused such an error.

Clause. Second, the power supply of the hard disk enclosure is unstable and cannot provide a stable voltage for the hard disk to use, which is generally caused by the defects in the design of the hard disk enclosure or the mismatch between the voltage required by your hard disk and the hard disk enclosure.

Clause. Third, there is a quality problem in the hard disk enclosure itself, and there is nothing to explain this.

If you can't enter the system at boot and can't enter the black screen**, then most of the cases are caused by system corruption, such as the loss of the main boot file, the broken partition table, etc. You need to make a USB flash drive boot tool to reinstall the system for the computer.

Use partitioning software to repair the hard disk partition table and see that it will not damage the data.

Hello. First of all, the data in the SSD is recorded incorrectly, except in logical storage and partition tables. Otherwise, the basic data cannot be retrieved.

It is advisable to troubleshoot hardware faults, such as interface or power supply issues, before recovering data. The SSD can replace the data interface and power socket, if there is a condition, get an SSD mobile hard drive enclosure or connect it to other computer motherboards to see if it is displayed normally.

According to your description, the F drive has very important information. I don't know how important your information is. If it is very important, I have no experience myself. For the sake of conservatism, it is recommended to find a hard drive data recovery company in the local computer market.

If you don't get to the point where you need to pay to save your data, you can find a partition software to check the partition for errors. For example, some PE boot USB flash drive systems come with the basic DiskGenius software. It is recommended that you recover data under the PE system or DoS as much as possible.

Check to troubleshoot partition table errors. Next, use DiskGenius or other data recovery software to try to recover the read data.

For example, software such as EasyRecovery operates and selects differently depending on the software and version. Follow the prompts to see what happens.

Open cmd and execute chkdsk f:f repair to fix it and try it.