-
Anonymous users2024-02-09The blue screen of a computer can be caused by many reasons, and the solution is to first the software and then the hardware, that is, check the software problems first, and then check the hardware problems.
1. If the software or driver is installed before the blue screen, enter the safe mode, uninstall or delete the newly installed software and driver, and then boot it to try again.
2. If there is still a blue screen after deletion, or you can't enter the safe mode at all, then reinstall the operating system and try it.
3. If the blue screen is still blue after reinstalling the system, consider the hardware problem. First of all, clean the dust inside the computer thoroughly, remove the equipment on the memory, graphics card, and PCI slot, and test it with an eraser. Because the temperature caused by dust is too high, poor contact, etc., it will also cause a blue screen; At the same time, remove the CPU, graphics card and other fans and replace them with new heat dissipation silicone; Also, check that the temperature of all hardware is normal.
4. If it still doesn't work after cleaning the computer, then use the replacement method to check the computer hardware, if there is no replaceable hardware or not familiar with the computer, it is recommended to find a professional maintenance personnel to deal with it.
5. Hardware replacement is troubled in the following order: memory, hard disk, graphics card, motherboard, power supply, other hardware, and CPU.
6. When using the replacement method, it is best to unplug all the cables on the computer and the hardware that is not needed for booting, and only keep the power supply, motherboard, CPU, memory, graphics card, hard disk, and monitor.
7. Pay attention to check whether there is a burnt smell on the hardware and whether the capacitor on the hardware is bulging.
Tips: The replacement method to check the hardware problem is mostly used in the case that there is redundant hardware that can be replaced, and the fault point is not easy to judge directly, you need to have a certain understanding of the computer hardware, if you are not familiar with the hardware, it is not recommended to use the replacement method to check the hardware failure.
-
Anonymous users2024-02-08This is because XP does not have an AHCI driver for hard disks by default. Booting XP in AHCI mode will result in a blue screen. To change to IDE mode. Win7 is the opposite.
Enter BIOS and change the hard disk mode to IDE compatibility mode. If you can't find the IDE item, it's because many motherboards indicate that this item is worded differently. Some say ahci and compatibility
This AHCI is equivalent to SATA mode. Compatibility is equivalent to the IDE pattern.
Precautions for installing the system on the brand machine: Many brand machines have problems when reinstalling the system, this is because a partition installed by the manufacturer is hidden before the main partition for the whole machine system detection, so you should pay attention to this problem when installing or reinstalling the system on the brand machine.
When installing the system on a brand machine. Make sure that you install the system without hiding partitions. Otherwise, there will be:
1).Blue screen. 2).
Installation time is extraordinarily long. 3).There was an error in the replication process.
About 20% of these situations are brand opportunities.
Solution(1)Refresh the installation using the original image installation version.
3).Delete the hidden partition before installing or reinstalling the system. 4) If the blue screen appears during the installation process, you need to enter the BIOS to change the hard disk mode to IDE compatibility mode, reboot and try to install the system again.
Give you the original version of xp, you try to install the xp system again according to the above said, don't ask again, if it helps you, please adopt it in time
-
Anonymous users2024-02-07Hello, your machine has a blue screen failure, there are many possibilities, I give you a good tutorial to help you solve this problem.
If there is still a fault, you can call Dell's after-sales service** consultation: fixed** dial 800-858-2969; Call 400-886-8610 from your cell
Dell Workshop Inquiries provided to you**:
Flip the switch on the left to turn it on/off, and the new model no longer uses FN+F2 control. >>>More
System issues reinstall it.
Well, my friend, my machine is also this graphics card, I play lol, it's okay, this 2k should also be able to be low-end, but friends, the processor is okay, and there is also a memory stick that can be added to the root, and there is no problem at all in playing 2k, and I hope my friend can ask any questions, and my friend will be happy for a lifetime.
Hello, it is recommended that you must install the original Windows operating system, and do not use the ghost version of the operating system, because this kind of operating system is mostly a thin system, and the stability and compatibility are very poor. And be careful not to use the driver management software to find the public driver, but should use the factory-built operating system CD or go to the official website of Dell ** corresponding hardware drivers to install, so that the stability of your operating system is very high. >>>More
Dell Computer Screenshot Method:
The computer itself has a screenshot function, and the key is the "print screen" key on the keyboard, and some keyboards are "prt sc sysrq", all the same. >>>More