I d like to ask you a question about the Dell Vostro 1450 Reload System

Hello, it is recommended that you must install the original Windows operating system, and do not use the ghost version of the operating system, because this kind of operating system is mostly a thin system, and the stability and compatibility are very poor. And be careful not to use the driver management software to find the public driver, but should use the factory-built operating system CD or go to the official website of Dell ** corresponding hardware drivers to install, so that the stability of your operating system is very high.

At the same time, because the current computer configuration is relatively high and the memory is relatively large, so chip manufacturers are also focusing on the development of drivers under the 64-bit operating system, it is recommended that you install the 64-bit operating system, otherwise the 32-bit operating system may not be able to use the driver after the installation of some hardware can not use the driver to drive normally.

In addition, you are reminded to use as little domestic optimization software as possible, and carry out the so-called "optimization" or "garbage cleaning", which can easily disable the boot operation of the driver or directly delete the driver by mistake, resulting in problems in the operation of the machine.

Vostro 1450 reinstalled XP OK,I just installed it a few days ago,But to modify the BIOS settings,Your situation must be that the driver is not installed,Look at the device manager to see if there is a small yellow question mark,It's best to update the driver under the driver wizard。 There are always small boxes because the language pack is not installed, in short, reinstall the system.

1. First of all, plug the installed U disk into the computer, then turn on the computer to enter the installed system 2, and then click the browse button in the dialog box that appears.

3. Then select the system image file.

4. Next, select the system disk, which is also the C disk.

5. After clicking OK, the system will be automatically reinstalled.

Step 1: Change the hard drive mode. When the Dell 5460 is powered on to the Windows system screen, press the F2 key to enter the BIOS settings and change the SATA hard drive mode of the laptop from ACI to ATA.

Step 2: System hard disk partition. The user refers to the previous method, enter the BIOS settings, set the Dell 5460 to boot from the U disk, and then insert the U disk with the system installer, restart the Dell 5460, enter the PE, format the hard disk, click the tool, select Set as the role, pay attention to set the C disk as the function, otherwise it will affect the normal installation and start of the system, the general Win7 system disk is recommended to be more than 30G, and then divide the hard disk into 2-4 partitions according to the user's own preferences.

Step 3: Initial installation of the system. Restart the Dell 5460, select and install the Ghost Win7 system in the boot U disk image file, and then the program will automatically start the installation, and the progress bar will read to 100%, which means that the preliminary installation of the Dell 5460 system is complete, and you can unplug the U disk at this time.

Dell 5460 is easier to install Win7 system than Windows XP.

Step 4: User System Settings. After the user restarts the Dell 5460 computer again, you can enter the system page, this is the first time to start the system, the user wants to set the system language, keyboard type, user name, computer name, system password, and then agree to the installation agreement of the win7 system, set the system time.

Step 5: Install the driver. The Dell 5460 system is installed, and after installing drivers such as sound card and graphics card, the computer is ready to use.

Dell notebooks can be installed in the system by following the steps below:

1.First, buy a system disk and put the system disc into the optical drive.

2.Turn on the power and then observe the on-screen prompt to press "F2" for BIOS settings before booting the system.

3.Set the startup mode. Find the boot option, there is the first boot, generally 1st boot device, move the cursor to it, press the enter key to go in and select the item with the word ***, press the enter key to confirm.

4.Some of the key methods for moving the cursor are the arrow keys of the keyboard, and some are f5 and f6, which are prompted by the screen. Then press F10, select Yes, press Enter to confirm, and then the computer will automatically restart.

5.At this time, boot from the disc when starting, enter the installation system interface, follow the system prompts, step by step, and the installation process will be restarted many times.

Dear Dell users:

It is recommended that you go to the after-sales department to install it, do not use a pirated system, which will damage your computer, you can buy a genuine system, and the staff will install it for you for free!

You can call Dell's after-sales service** consultation: fixed** dial 800-858-2969; Call 400-886-8610 from your cell

Provide you with a link to Dell's service outlets.

Dell is here for you.

It's better to use a fully installed one.,The ghost version,There are still some problems in driver identification.。

Disassembly steps: disassemble the back. First remove the battery, then remove all the small covers on the bottom shell, and then unscrew all the screws on the bottom shell, only one screw of the optical drive is fixed, and directly pull it out after unscrewing.

After taking out the optical drive, unscrew the three screws under the optical drive.

Remove the keyboard box. After all the screws on the back are unscrewed, come to the side of the keyboard, and you can directly cut out the frame of the keyboard, but there are some small plastic hidden buckles around it to be careful not to break.

Disassemble the keyboard. After the keyboard frame is taken down, you can see that there are several screws on the upper side to fix the keyboard, unscrew the screws and turn the keyboard up, unplug the keyboard cable at the back, then the keyboard can also be taken down directly.

Dismantle the C shell. After the keyboard frame and keyboard are removed, unscrew the screws that can be seen under the keyboard, remove the cable of the touchpad, and remove the C shell.

Remove the hard drive. There is a cable on the top of the hard disk that connects the motherboard to the external small board, first remove the cable, and then unscrew the screws that hold the hard disk and remove the hard disk.

Remove the motherboard connectors and screws. There are many interfaces for built-in functional devices on the motherboard, such as speaker cables, fan cables, microphone interfaces, screen cable interfaces, etc., and there are many screws marked with numbers on the motherboard.

Remove the screen cable interface, the screen cable interface is a relatively large and fragile interface, and it is extremely important. When removing the screen cable interface, be sure to pay attention to the amount of force.

After all the connectors on the motherboard have been processed, the protective plate can be taken out, and the heatsink is fixed to the CPU, and it can be removed by unscrewing four screws.

The processor of the Dell Vostro 1450 is a 64-bit processor, and the processors produced after 2004 are all 64-bit.