How to manually reset the Hanteng X7 maintenance lamp to zero? How to eliminate Hanteng X7 small wre

When the light is on, something is wrong! Go to the repair shop for overhaul to ensure driving safety.

Manual zeroing has two buttons in the lower left corner of the instrument cluster. First, press the maintenance button, mileage reset button, and turn on the ignition key until the light is on, and let go of the maintenance button after hearing the ding, and hold it for two seconds. Keep the ignition switch still, and then press and hold the minute button next to the meter, as long as the minute time does not move, the zero is completed.

Key Benefits:When you change your engine oil, you can check your transmission oil by the way, and since the inspection process is more cumbersome, you can ask the dealer's service department to handle it. In order to measure accurately, the car must be discharged into neutral p, run at idle speed, and parked on a flat place, and the oil must run to an operating temperature of 80 93.

Too much or too little oil can damage the gearbox, and too much oil may cause excessive resistance to the operation of the parts, or cause the transmission oil to bubble and deteriorate, resulting in abnormal wear and tear of the parts. So when you check your transmission fluid, it's important to measure accurately.

(1) Press and hold the zero button "A" while pressing the brake.

2) Twist the ignition switch to "on" and do not start the car.

3) The character "INSP" will flash or the display will flash.

4) Keep holding down the zero button "a" until "...appears on the display.

5) Release the zero button "A" and release the brake.

6) The ignition switch is twisted back to the "off" state. The zeroing work is over.

Go to the settings menu, the vehicle menu, select Oil Life, Reset to Zero.

Start by pressing and holding the button in the bottom right corner. Then turn on the key (don't drive the car) and hit the brakes and wait five seconds.

Hanteng X5 small wrench removal steps:

1. Turn off the ignition switch to make the car Kaizhi in a power-off state;

2. Press and hold the long bar button at the bottom right of the instrument cluster;

3. Turn on the ignition switch and power on the car (no need to turn on the car);

4. Keep pressing the long lever button of the instrument cluster and press the brake;

5. Wait for about 5 seconds to eliminate the small wrench.

Regular maintenance can improve the performance of the car and prolong the service life of the car. According to the relevant car maintenance trial plan, if the car is properly maintained, it can save fuel during driving.

Car maintenance is as fast as 40 minutes, slow as two or three hours, the specific maintenance time is uncertain, the amount of time depends on the number of maintenance items that the car needs.

Conventional maintenance is divided into three aspects: car body maintenance, car interior maintenance, and car body refurbishment.

1. The maintenance of the car body is mainly to remove all kinds of oxides inside and outside the car body to prevent the car body from being corroded;

2. The maintenance in the car is mainly the repair of fuel, lubrication and other operating systems to ensure the driving of the car;

3. The refurbishment of the car body is mainly to repair scratches, engines, bumpers, leather and other materials.

Maintenance is divided into small maintenance and major maintenance, the main item of small maintenance is to replace the oil and filter, so the ** will not be very high, around 500-800 yuan; If it is a large maintenance, then the maintenance items have increased, and the ** will naturally increase a lot, around 1000-1500 yuan.

Hanteng X7 maintenance of the world regret lamp manual search is positive zero adjustment method:

1.Press the reset button "A" for a long time and do not let go, press the brake;

2.Turn the ignition to the "on" position. If it is a one-button start car, press the one-button start button (do not start the car);

3.The "insp" character will flash on the display, or the display will flash;

4.Keep pressing the zero key "a" until "."The symbol appears on the screen;

4.Release the reset button "A", and then release the brake;

5.Turn the ignition to the "off" position so that the maintenance light is completely zeroed.

The function of the maintenance light is to record the mileage of some important accessories, just like a timer in a sprint race, reminding the owner and maintenance personnel. Although the maintenance light does not affect the performance of the car, after the maintenance is completed, the maintenance must be cleared, otherwise the owner does not know when the new parts will be used next time.

Benefits of maintenance.

The maintenance light is on, indicating that the car needs to be maintained. Regular maintenance can improve the performance of the car and extend the service life. According to the relevant car maintenance inspection plan, proper maintenance of the car can save fuel during driving; In addition, after vehicle maintenance, CO emissions at idle are reduced.

Hanteng X7 maintenance lamp manual zero mode:

1. Press and hold the zero button "A" and don't let go, and press the brake pedal;

2. Twist the ignition switch to the "on" place, if it is a car with a key to start, press the key start button once (you don't have to run the car);

3. The "INSP" identifier will flash on the display or the display will flicker;

4. Keep tapping the zero button "A" until "..." occurs in the displayMark;

4. Release the zero button "A", and then release the brake pedal;

5. Twist the ignition switch to the "off" part, so that the maintenance lamp will be reset to zero.

The effect of the maintenance light is to record the application kilometers of some key components, just like a timer in a 100-meter race, which has the effect of alerting car buyers and their car maintenance workers. Although the maintenance lamp does not harm the performance of the car, after maintenance, the maintenance must be cleared, otherwise the next time the auto parts are replaced, the buyer will not be able to know exactly when the new parts will be used.

The benefits of maintenance.

The flashing maintenance light indicates that the car must be maintained, and regular maintenance can improve the performance of the car and increase the service life of the car. According to the relevant car maintenance test plan, the car can be properly maintained, and the gasoline and diesel can be saved in the course of driving; In addition, after vehicle maintenance, the amount of CO emitted from the car is reduced when the car is on standby.

Hanteng X7 maintenance lamp zero method:

1. Turn off the ignition switch; Press and hold the mileage reset button and hold still; Turn on the key until the instrument lights are all on, and then you can see that the instrument mileage is changing;

2. When the odometer does not change, release the mileage reset button; Turn off the ignition switch and turn it back on, and the maintenance will be reset to zero;

3. [Precautions] The current car driving computer has maintenance mileage prompts, if there is no maintenance to the kilometers, then the maintenance light will be on, after the maintenance, the service station will help you zero the maintenance light, start to record the mileage, to the next maintenance kilometers prompt. If you don't go to the service station, reset it manually and follow the instructions. If it is not returned to zero, then the mileage of your maintenance will not be recorded;

4. [Maintenance car] Pay attention to the quality of oil products, and be sure to refuel at a large regular gas station such as "PetroChina and Sinopec". The higher the gasoline mark, the better, according to the engine compression ratio or the oil number specified in the car manual, the higher the general compression ratio of the car requires the higher the gasoline mark. Pay attention to the oil level of the gasoline tank should not be too low, because the current cars are all EFI, and the gasoline pump is cooled by gasoline, if the gasoline liquid level is too low, it will cause the load of the gasoline pump to increase, which will easily lead to damage to the gasoline pump.

It is recommended to replace the gasoline core every one to 20,000 kilometers.

The reset method of Hanteng X7 maintenance light is: turn on the ignition switch, do not start the car, the word INSP will flash or the display will flash, keep pressing the reset button A until it appears on the display. Release the reset button A and release the brakes.

Turn the ignition back to the off state to reset to zero. Fortune and.

The Hanteng X7 is positioned as a compact SUV. In terms of appearance, the front face of the Hanteng X7 adopts a double-spoke grille, which is integrated with the headlights on both sides, and the fenders are equipped with decorative parts. The tail is trimmed with chrome.

In terms of interior, Hanteng X7 is equipped with a 9-inch multi-touch capacitive screen, leather multi-function steering wheel, etc. The center console is cleverly designed. In terms of configuration, Hanteng X7 is equipped with intelligent electric tailgate, electric side steps, panoramic sunroof, HUD head-up display system, keyless entry, one-button start and other intelligent technology equipment.

At the same time, Hanteng X7 is also equipped with tire pressure monitoring, lane merging assist, lane departure pre-pickpocketing alarm, electronic anti-glare rearview mirror, this Kai panoramic image and other safety configurations.

In terms of power, the Hanteng X7 is offered with a turbocharged engine with a 5-speed manual and a 6-speed power shift, respectively. The maximum engine power, the maximum torque of the engine is 140kw, and the maximum torque is 250Nm.

Millions of car purchase subsidies.