-
It's all the same, just buy one, there's nothing that hurts or doesn't hurt, Roche's is the same, don't buy Roche's, you can buy domestic ones! There is nothing to do with these, so save some if you can! It's all painful, just adjust the depth of the lancet.
Just buy one, Johnson & Johnson is good, the same, you don't have to buy it so good, those things are all domestically produced, don't cheat, you can only say that you have money when you buy it.
-
The brand Roche is relatively old, but the blood collection volume of Omron is also 1 microliter. 5 seconds reading. Personally, I don't think this feature is comparable at all.
Because the amount of blood collected needs to be pricked, and the more blood comes out is a waste, and the less needs to be pushed. Suggest something that will work for you.
1. The test strip of each blood glucose meter is one-to-one, just like our ID card. After each change of test strips, proofread the test strips**.
2. The needle of all brands of blood glucose meters is 28g, and some people are afraid of pain and adjust the needle to a small force. In fact, the deeper the blood collection, the more accurate it is. It's like the deeper you drill a well, the more water you have, and the better the quality.
3. Pay attention to the shelf life of blood glucose meter test strips. Do not use expired test strips. Because test strips are also chemical principles. The use of expired test strips is inaccurate and harmful to the body.
4. Don't buy unknown brands for cheap, or be deceived by pharmacy staff. Be able to make sound judgments.
-
In fact, they are all about the same, there is no difference between 1-3 microliters of blood collection, these 2 are big brands, you can choose at will, At present, Johnson & Johnson has done the best in terms of market share, but the domestic ones are also good now, and the blood glucose meter is not high-tech, and the domestic technology is also very mature, so there will be no problem.
-
In terms of brand, Roche is stronger, and it is actually difficult to judge from the naked eye that the blood collection volume of 1 microliter and microliter is about 1-2 ml of blood collection, so this has nothing to do with good or bad. Or choose Roche's good point!
-
Omron is good, I don't regret buying it.
-
Sometimes a lot of things can't just look at the parameters, like Xiaomi and Apple.
-
<>1. Take out the blood glucose meter, blood collection pen, blood collection needle, and test strip bucket, and put them on a clean desktop, and there should be no electronic devices such as televisions, mobile phones, and microwave ovens near to prevent interference. After washing or disinfecting your hands with warm water, you must wait for a completely clean test. Take out the blood collection pen and install the blood collection needle, and pay attention to the smaller the number, the shallower the piercing.
Pull the lance spring on gear. The first time you use it, you can adjust it to the middle gear first, and the next time you adjust the depth appropriately according to the actual situation.
2. Open the test strip bucket and take out the test strip, pay attention to cover the bucket lid immediately after taking it out, and do not expose the air to it for a long time. Insert the test strip into the blood glucose meter, and the fingers should not pinch the blood suction port and plug during the process of taking and inserting the test strip, as the temperature of the finger will affect the result. If the blood glucose test strip needs to be corrected to know the lack of ** requirements, the ** displayed by the blood glucose meter must be consistent with the test paper**, and the results are not allowed to be raised when they are inconsistent.
-
Accurate. There are two differences in the working principle of blood glucose meters, one is photoelectric type and the other is electrode type.
The photoelectric blood glucose meter is similar to a CD machine, with a photoelectric head, its advantage is that it is relatively cheap, and the disadvantage is that the detection head is exposed to the air, which is easily polluted and affects the test results, the error range is about plus or minus, and the service life is relatively short.
Generally, it is more accurate within two years, and after two years, it is recommended that patients who are using photoelectric machines go to the repair station for calibration. In general, hospitals have hospital representatives to carry out regular maintenance, while home blood glucose meters need to go to the after-sales service department for bald maintenance.
-
Episode 581: Unboxing**Roche blood glucose meter, a small and capable big brand, is the accuracy passable?
-
The German Roche brand is very good, it is a common imported household blood glucose meter, and it is currently the world's No. 1 blood glucose meter brand. There are three main models of Roche blood glucose meters: vitality, excellence, integration, and Roche excellence.
Their blood glucose meters, test strips, and needles are all produced abroad and imported to China for sale. Roche test strips are considered to have a small amount of blood collection among imported brands, and all models support additional blood collection, so test strips will not be wasted due to insufficient blood collection. Another attraction is that the blood collection pen delivered by the Roche blood glucose meter is very good, and there is almost no pain.
Above, for reference.
-
When the test result of the Omron blood glucose meter is greater or lower, it will alarm "the result is too high or too low".
So the minimum test range of Omron blood glucose meter is:
I bought it for my dad in Jiu'an, and I've been using it for almost a year, and the overall effect is good, and I don't know how Omron hasn't used it, so it should be Japanese. Jiu'an's should be a domestic brand, which is introduced on the encyclopedia. >>>More
The electronic sphygmomanometer needs to be calibrated at the place of purchase or the manufacturer, and it is impossible to calibrate it yourself. Don't move on your own, or you'll probably break it. >>>More
Omron's relationship with China can be traced back to 30 years ago, when its founder, Kazuma Tateishi, began to communicate and cooperate with all walks of life in China as a representative of the Japanese business community. Lifu Yamashita, general manager of Omron (China) **** regional headquarters, revealed that in the ten-year long-term business concept formulated by Omron, China is positioned as an important piece of Omron's global strategic layout, and it is also the core pillar of Omron's global R&D system. After joining the WTO, China has become the focus of the world economy. >>>More
There are many ways to go back to the point of origin depending on the hardware. For example, three feedback signals may be a limit, a zero point is close to a zero point, if the middle is the origin, the last one is the limit, the beginning is the origin of the signal, when the movement to the origin of the approaching signal, the motor will slow down to the origin signal stop, such as two signals, may not be a limit, such as a signal is to use a signal as the origin of the signal, there is no origin proximity signal, these methods can achieve the function, but the three signals are the most reliable, The origin of the servo motor does not necessarily have to use an external input signal, its own Z phase can also be used as the origin input, you said that the rotation back to the origin is a way to find the origin, not necessarily so used, and the setting of the servo, such as the CW direction or the CCW direction, in short, there are many methods, which one depends on the conditions and the use environment.
What PLC are you using? The high-speed port of each PLC is different, in addition, whether you use an external module or use a unit PLC, its connection is different, if you use the built-in high-speed port, the connection method is relatively simple, A phase is connected to X0, B phase is connected to X1, Z phase can not be connected, because Z phase is a weekly pulse phase, that is, the encoder rotates one week for a pulse, according to your needs, if you want to use, you can connect to any input port. Shanghai Barutu Construction Machinery Technology Co., Ltd. will answer for you.