Why should the Midea water heater be turned off when you make an appointment for bathing?

It should be heated at any time, and 04 is the start of heating at 4 o'clock.

Yes, if it is on for 34 hours, it is recommended to use the middle insurance function, which can save electricity, and you can save electricity by making an appointment for a bath After you set the temperature and press the reservation button, the general display will display 1-24 hours The number This number represents 1 hour Or 24 hours later, the machine has a water heater For example, if you go to work at 8 o'clock in the morning and come home at 6 o'clock in the afternoon, there are 10 hours in between, you can.

17:00 The machine starts operating.

Smith imported brand, the quality is better, it comes with leakage protection, and the after-sales service is also better, I also use it. However, it is more expensive.

Haier has a water heater for bathing.

Smith imported brand, the quality is better, it comes with leakage protection, and the after-sales service is also better, I also use it. However, it is more expensive.

Well, the power consumption is not very large, and the power consumption in the national standard standby state is less than 6W.

Function. Let's say I take a shower in five hours, then the timing is: use after five hours You say there will be hot water in the morning, but. Hot water is well mixed with some cold water in a water heater and it gets cold – especially the kind that is heated in layers for an overnight night.

1. The boiling time is too short, generally more than 30 minutes. 2. The temperature may be too low, and it can be set to 50-60 degrees 3. Check the plug, whether the leakage is working properly, maybe the plug is loose, or the leakage switch trips.

The water heater safety warning light is on, it is abnormal, indicating that your water heater is leaking, first of all, you have to check the power supply of your socket, I met you said that there are several situations, all of which are problems with the wiring at the user's home, find an electrician to check your zero line and place.

It should be heated at any time, and 04 is the start of heating at 4 o'clock.

If you don't know, you can take out the product manual and take a look.

Need. First, tap the power switch to turn on the power. Otherwise, you will not be able to use the appointment function, so click on the appointment display function in the control panel.

Click on the + sign and the - sign on the control panel to adjust the appointment time setting. Adjust the time to the time you want to use, select the heating mode of the water heater, and the reservation function can be used.

Precautions for the use of electric water heaters.

1. Don't use a valve with a handwheel: Don't use a valve with a handwheel for the tap water valve at home, it is recommended to use a wrench valve, because once someone turns off the water valve by mistake, the water tank will burn the heating wire due to lack of water.

2. Turn off the power when there is no water: When using the water heater, when you open the boiling water valve and find that there is no water, you should immediately turn off the power supply, otherwise the electric water heater will be damaged when it works without flowing water.

The reservation function of the water heater: set the temperature and time, and the controller will automatically calculate when the heating will start according to the time and temperature, and reach the time and temperature you set! For example, if you set it to 40 degrees at 6 p.m., the water heater will be heated to 40 degrees by 6 o'clock! Of course, this mainly depends on the model of the water heater, some have an appointment function, and some do not. If there is a reservation function, set up the program and press the preheating button to set the water time

1.Turn on the power and turn on the electric water heater;

2.Click to make an appointment for a bath adjustment room, and the screen for the quasi-appointment will flash to set the time;

3.Click on the appointment bath cycle setting, the screen of the appointment extension will flash, set the time;

4.It can be used when you need to take a bath.

Summary. If you want to cancel the reservation function while you are setting the reservation function, you can do so when you select the reservation time. At this time, the number of hours to wait for the reservation will be displayed on the washing machine display, such as 1 hour, 2 hours, 4 hours, 8 hours, all you need is to press the select button continuously until the washing machine display has no time to display, at this time, the scheduled laundry function that is being set has been canceled.

If the scheduled laundry function has been set up, and we need to cancel the scheduled time for some reason, what should we do at this time? In fact, the cancellation operation at this time is simpler, we only need to press the pause button on the washing machine first, and then turn off the power of the washing machine, so that the scheduled laundry function that we have set up is completely turned off. The next time we need to set up the scheduled laundry function, we can reset it according to the method described at the beginning.

Or you can stop for about 5 seconds and turn it back on directly, and then re-set the washing machine according to the washing function we need.

Midea electric water heater reservation function has been booked and then I don't want to make an appointment, how can I cancel itHow to cancel the reservation function?

Can you tell us more about that?

If you want to cancel the reservation function while you are setting the reservation function, you can do so when you select the reservation time. At this time, the washing machine display will show the number of hours to wait for the Lingsen reservation, such as 1 hour, 2 hours, 4 hours, 8 hours, all you need is to press the selection button continuously until the washing machine display has no time to display, at this time, the reservation laundry function that is being set has been canceled. If the laundry function has been set up or set up, and we need to cancel the scheduled time due to some reasons, what should we do at this time?

In fact, the cancellation operation at this time is simpler, we only need to press the pause button on the washing machine first, and then turn off the power of the washing machine, so that the scheduled laundry function that we have set up is completely turned off. The next time we need to set up the scheduled laundry function, we can reset it according to the method described at the beginning. Or you can stop for about 5 seconds and turn it back on directly, and then re-set the washing machine according to the washing function we need.

How to use the Midea water heater local destruction reservation function: set the temperature and time, and the controller will automatically calculate the heating according to the time and temperature to reach the set time and temperature.

This answer is suitable for most hot water bionic models such as Haier CEWH-60P5, Wanhe JSLQ20-12EV20, etc.

Summary. Kiss <>

I'm glad to answer for you, the water heater function can not be turned off, so that the drainage warning function restarts the timing, the water heater is turned on, the drainage indicator light is always off, after the drainage time is up, the drainage indicator flashes and displays, the inlet water pipeline antibacterial patented technology, the antibacterial rate is greater than 99%, the cyclone diversion groove design, two-way convection technology, uniform heating, no dead end, automatic power-off technology for drainage, intelligent automatic detection, fast cut off the power supply, to prevent dry burning. <>

<> how to turn off the water function of the water heater.

Kiss <>

I am happy to answer for you, the living water function of the water heater of the United States can not be turned off, so that the drainage early warning function seepage macro can restart the timing, the water heater is turned on, the drainage indicator light is always off, after the drainage time is up, the drainage indicator flashes and displays, the inlet water pipeline antibacterial patented technology, the antibacterial rate is greater than 99%, the cyclone diversion groove design, two-way convection technology, the heating is evenly dusted, no dead angle, the drainage automatic power-off technology, intelligent automatic detection, and the power supply is cut off at high speed to prevent dry burning. <>

<> knowledge expansion <>

Midea living water heater has TECH living water technology, through "one police, two rows, three flushes", to achieve the great purpose of replacing the stagnant water of the inner tank and releasing the living water. First of all, the water heater control panel comes with a "health warning prompt", which intelligently remembers the usage time of the electric water heater and automatically reminds the drain every 90 days. With just one key, open the drain valve on the left side of the bottom of the inner tank of the electric water heater, and the water and impurities of the inner tank can be discharged smoothly.

In addition, Midea's unique water inlet environment can help to further flush out the stagnant water at the bottom, and experiments have proved that the water quality replaced by Midea's active water heater is 80% cleaner than before, so that users can easily enjoy the living water bath. As long as you pass the "one police, two rows, and three cleanings", you can easily discharge the scale in the bladder, improve the water quality of the inner tank, and realize the "living water" bath. With the intelligent sewage warning function and the unique patented drainage structure, Midea's TECH series of water heaters help consumers easily achieve regular cleaning of water heaters.

In the daily life of consumers, they also have such intimate and exclusive private bathing butlers. <>

Summary. Hello, how to turn off the electric water heater Steps: 1. Press the appointment button and choose between appointment 1, appointment 2, and cancel. 2. Press Appointment 1 and Appointment 2 to stop when they are not displayed. It's good to flash for a while, and the setup is successful.

Hello, how to turn off the appointment method of the electric water heater Steps: 1. Press the appointment button, choose between appointment 1, appointment 2, and cancel. 2. Press Appointment 1 and Appointment 2 to stop when they are not displayed. It's good to remove the sail and flash it for a while, and the setting is successful.

The temperature will automatically jump to 75 degrees how to set.

The temperature will be adjusted to 75 by yourself, how to set the temperature.

1. It may be that the thermostat of the hot water pants hole is malfunctioning. 2.It may be that the default maximum water temperature set by the water heater is 75 degrees, and when the dashboard asks about this question, the setting of 45 degrees directly burns to 75 degrees.

That's how to tune it.

The temperature control has been changed.

Dear, if the temperature control has been replaced, it is also possible that the display screen of the water heater has failed, in this case, you can remove the display screen, find a professional to repair it, or directly replace a new display screen to see if there will be such a failure. If these problems are not these, then you need to contact a professional repairer, the key person and the section staff will come to the door for inspection, and repair the problem after the manuscript reputation is detected.