They are all connected to W1F1 and can access the Internet, why do I show that the hotspot cannot ac

Summary. This is usually a problem with the network source. It is recommended to restart the wireless router. Then re-enter the password to connect.

The link wifi shows that it is connected and cannot access the Internet, and the logo is yes! Good what the reason.

This is usually a problem with the network source. It is recommended to restart the wireless router. Then re-enter the password to connect.

I've tried it and it still doesn't work.

Other mobile phones can be used.

Can the phone be connected to other wifi?

Nothing else can be used.

Then that's the phone problem, you can try backup and reset.

Or find this service provider.

It's the seller who may have to overhaul it.

It was possible to use it a few days ago.

These settings are fine.

It's likely that the hardware is damaged.

Mobile phone hardware. Well.

Steps to Resolve:

You don't have to use it after you turn it on.,Just bury it with a small function in this software.。

After the user turns on Cheetah's free WiFi, Wang Qiao clicks on a drop-down sign next to "Share" in the upper right corner.

After clicking, a menu item will appear, where the user will find the "One-click repair" option and click on this option.

Select the option "I can't connect to the Internet after connecting" in this interface, and click to check it. After checking the box, the user clicks the one-click repair button.

After completing the above steps, the system will automatically fix the existing wifi connection problems, and after a short fix, your problem can be solved.

You have to authenticate it, you can't connect it.

Causes: 1. Mobile phone firmware problems.

2. The wifi parts need to be repaired.

3. Router setting problems.

4. The mobile phone wifi setting is wrong.

Solution: 1. Wipe and restore all previous WiFi settings.

2. Turn on the wifi option again.

3. There is a blue arrow number next to many wireless networks, click the blue arrow and then click Ignore this network.

4. Go back to the main interface and turn off your iPhone mobile phone and restart.

5. After restarting, enter the WiFi settings page to set up the WiFi.

6. Reset the router.

7. Go to the mobile phone repair point to check whether the wifi parts of the mobile phone are damaged.

The wifi signal at home is obviously full, but there is no Internet access, so the problem is here.

Wi-Fi is in arrears or has a limit set.

The reasons why the wifi is not available are:

1. The wifi itself is a problem, the wifi may not be connected normally, resulting in the inability to access the Internet;

2. Router problems, the router may be overheated or damaged;

3. There may be broadband arrears, resulting in inability to access the Internet;

4. The wifi name contains Chinese, resulting in some mobile phones unable to connect to the Internet;

5. There may be a problem with the mobile phone system, which may cause the connection to wifi but the Internet cannot be accessed.

Suggested workaround:

1. Use other mobile phones or devices to connect to wifi to try whether you can access the Internet and rule out the problem of wifi itself;

2. Restart the router to try, or restore the router to factory settings, and then dial up the Internet again, and according to.

Setup wizard to reset the wifi, or change to a new router and dial-up to connect to the Internet;

3. Contact the broadband customer service to confirm whether there is any abnormality in the broadband account, such as arrears, recharge the broadband, and then dial up.

Connect to try; 4. If the wifi name contains Chinese, it is recommended to modify it to English or a combination of English and numbers before connecting;

5. If the above reasons are ruled out, it is likely to be a problem with the mobile phone system for a long time, and it is recommended to restore the factory settings or.

Flash the phone to see if that solves the problem.

There is no network connection on the router

Cause 1: The line connection is incorrect.

Home Network Environment Cabling]:

1. There is a cat (modem): cat (modem) - router WAN port; The LAN port of the router --- a computer.

2. No modem: network cable --- router WAN port; The LAN port of the router --- a computer.

Reason 2: Router dialing is not set up.

Computer enters the router]:

1. The computer IP and DNS settings are automatically obtained.

2. Open the browser, enter the general router address in the address bar is this or check the login information on the back of the router) Enter the route - enter the user name and password, (the default is generally admin).

Set Router Dialing]:

1. In the [Setup Wizard], select [PPPoe Dialing] (some are ADSL Dialing), enter the Internet user name and password according to the prompts, and save.

2. In [Network Parameters] --WAN Settings], select [Normal Mode], and select [PPPoe Dialing] in the three options of [Connection]. The next step is to select [Auto Connect], Save, and Exit.

First of all, from your screenshot, your wireless router has Internet access, that is, you can actually access the Internet, but now you say that you can't access the Internet, which may cause problems in three aspects:

The first possibility is a DNS error, or it is problematic.

At present, when we access the Internet, because we can't know the IP of the other side, we need to query the corresponding ** through DNS, which causes if there is a problem with accessing DNS, in fact, the mobile phone is unable to access the Internet. Usually when you surf the Internet through a router, the DNS address is set to the router's private IP, but the actual DNS is set in the router. If you can't access the Internet, it is recommended to connect to the router to see if the router's DNS is set correctly, if the settings are normal, you can also try to set it to the public DNS, for example, try to see if it is a DNS problem.

The second possibility is that your access to the Internet is restricted, or the access to the Internet is restricted for many of your applications.

This situation is more common when the enterprise manages the Internet and employees access the Internet or has set up access rights in the router.

If your road stool is your own, you can connect it to see if there is a corresponding access setting prohibiting, if it is rubbing the network, you don't have to think about it, it is the owner of the wireless router who has made the corresponding settings, which is a way to prevent others from rubbing the network.

If the setting of Internet access is prohibited, because it is the setting at the top of your router, you can't crack it, and the corresponding port of many applications is restricted, so you can only do the approved applications. It is very common for many businesses to only send and receive emails online during working hours.

The third situation is more complicated, usually it may be interference from the wireless router, a problem with the router itself, or a quality problem with the uplink line.

At present, the interference of the WLAN channel we use is more serious, the delay of your Internet access is too large, resulting in some application access problems, you can try to set the channel of the router, and you may be able to access the Internet if you change it, if you don't know how to set it, restarting the router is also an option.

There is also a possibility that the wireless router itself is working for too long or other problems, in this case, you can also try to restart the router, restarting is always the first attempt to solve the network problem.