What are the advantages and disadvantages of manual coding and nesting and clothing CAD stacking?

Answer: Manual coding is slow, and the size is not accurate. CAD grading + plotter, at least 5 times faster.

2. What are the advantages and disadvantages of manual and garment CAD boards?

CAD arrangement, one person can row 4 sheets, 5 people row one, calculate by yourself.

I'm prodding, coding, and labeling, using Gerber software (ggt). I work as a master in the factory, and these three jobs used to require 4-8 people, but now I am alone, you say. The advantage ——— is that it is fast and accurate!!

Advantages of CAD technology:

Needless to say, the advantages of CAD technology are highly sought after, and it has several advantages.

First, the labor intensity is reduced, and the surface is clean.

Second, the efficiency of design work and the reuse of design results.

Third, the accuracy is improved.

Fourth, the data is easy to keep.

Fifth, the advantages of CAD in architectural representation drawings.

Sixth, the change of design concept.

Disadvantages of CAD technology.

First, the constraints of CAD technology on design ideas.

Designers' thoughts, ideas, and inspirations are constrained.

One. CAD is a waste of resources.

The complexity and difficulty of CAD make designers prohibitive, and some institutes are specially set up, equipped with computer operation and maintenance personnel, and even set up a special CAD work department, because an excellent designer is not necessarily a CAD master, and vice versa. CAD's waste of manpower and time can be seen.

Two. CAD is even more wasteful of material and financial resources. If an institution wants to implement a micromechanical diagram, its hardware equipment such as:

Computers, workstations, plotters, copiers, scanners, digitizers, digital cameras, recordable drives, UPS, etc. are expensive to invest, and their depreciation rates and upgrade costs are also high. Its investment in software is also high, provided that it uses genuine software, of course. Software costs tens of thousands of yuan, and the cost of commonly used office software is amazing.

Three. Consumables cost a staggering amount. Consumables include floppy disks, paper, plotter ink, copy toner, etc.

The cost of commissioning, maintenance and management of CAD equipment should not be underestimated.

Fourth, the unreliability of CAD technology.

CAD technology makes designers have to face some unreliable factors such as computer viruses, bugs in CAD software itself, equipment updates, and computer data saving. Due to one or more of the above reasons, the designer has to stop working to solve problems unrelated to the design, or due to the designer's misoperation and lack of knowledge of CAD, the design results may be deleted by mistake or covered for several years. The program error in the early version of a certain structural software in China is sweaty, and it has caused significant losses and has been corrected in subsequent versions, but who can guarantee that there are no problems with the current software.

The disadvantage of CAD is that it is a bit manual.

How to talk nonsense above.

If the CAD is not easy to use.

Why bother to buy so many manufacturers.

As far as grading and typesetting are concerned, there is no doubt that CAD is efficient and fast. In particular, it is convenient to automatically calculate the material consumption rate for typesetting. In addition, if the production is automated, CAD can be combined with CAM to produce samples directly from the cutting machine.

For large-scale production, production efficiency can be greatly improved.

The disadvantage is that the cost is too high, and in terms of the existing clothing CAD, the better ones are the French Lectra and the American KGB, as well as some small domestic clothing CAD software of various brands, which can be described as a wide variety and variety, but there is no compatibility, and the software is not perfect enough.

First, the current problems faced by the garment industry:

1. The finished product does not rise;

2. Labor shortage, recruitment difficulties;

3. Increased employment costs;

4. Personnel management is time-consuming and laborious.

Second, my solution - AGCO super nesting + inkjet plotter.

1. Save raw material costs: Fabric saving: automatic nesting improves the utilization rate of fabrics by 2%-5%, plotter paper pattern drawing lines, reduces fabric pollution, and avoids the pollution and scrapping of each batch of first layer fabrics; Cardboard: The computer automatically puts the code and discharges, and there is no need for the full proofing of the cardboard.

2. Save the cost of consumables: the ink cartridge is single-hole inked, and the amount of ink cartridge is reduced by half;

3. Save labor costs: a typesetting master can manage all typesetting, and other personnel can open the knife as long as they can do it;

4. Save time and cost: the generation of large cargo marks is reduced from 1 hour to 5-10 minutes.

5. Save management costs: the number of people who need to be managed is reduced by more than half, and only a few people and machines need to be managed, leaving managers with a lot of energy.

6. Rapid machine cost investment: through the cost savings of raw materials, consumables, manpower, time and other costs, the cost of the machine can be recovered in about half a year, and the service life of a machine is 5 years. The savings from the whole machine are still considerable!

3. Advantages of AGCO Nesting:

1. The earliest research and development of nesting software in China;

2. Unified management of database to avoid data loss;

3. Multiple people log in at the same time without interfering with each other;

4. The operation tools are comprehensive and detailed, and they are clear at a glance.

Fourth, the advantages of the one-degree plotter:

1. Accurate data proofing; At the same time as the machine is running, the sensor automatically monitors, finds an error and sends an alarm in time and automatically stops the machine operation;

2. Low noise: the machine uses imported motors, high-quality raw materials, and thoughtful design to reduce the noise generated by the operation of the machine, and also reduce the wear and tear of the machine and prolong the service life;

3. Automatic splicing of door width: beyond the normal width of the machine, the unique automatic splicing function of door width can perfectly solve this problem;

4. Double closed loop: horizontal and vertical double closed loop, automatic control of machine printing accuracy, no matter how long the print is, there is no need to worry about error;

5. Ink-saving device, single-hole ink, reducing the amount of ink used by half;

6. Servo motor: low noise, low energy consumption and high accuracy.

Yidu Technology, a cooperation, a lifetime of trust!