Automatically closes programs that take up the most memory

Method: 1. Don't open too many programs. If you have too many documents open or too many programs running at the same time, you will not have enough memory to run other programs, so you should close the programs and windows you don't use at any time.

2. There should not be too many programs that run automatically. Click Start, then Run, type msconfig, click OK to open the System Configuration Utility window, delete the auto-add.

Set up virtual memory appropriately.

1. The setting of memory is mainly based on the size of the memory and the purpose of the computer. The so-called virtual memory is to use a part of the hard disk space as memory when the physical memory is insufficient, but because the speed of hard disk transfer is much slower than the memory transfer speed, the use of virtual memory is slower than the efficiency of physical memory. The value that the individual actually needs should be adjusted many times by himself.

If it is too small, it will not be enough, so the system will prompt that the virtual memory is too small.

2. In general, Windows can be used to automatically allocate and manage virtual memory, and it can dynamically adjust the size of virtual memory according to the actual memory usage.

3. Custom virtual memory, the general default virtual memory size is to take a range value, it is best to give it a fixed value, so that it is not easy to produce disk fragmentation, the specific value is determined according to the size of the physical memory, generally 128MB physical memory set 2 -3 times, 256MB set times, 512MB set 1-times, 1GB set times or not.

4. The specific steps are as follows: right-click "My Computer" Properties Advanced Performance Settings Advanced Virtual Memory Change Select the partition where the virtual memory (page file) is stored Customize the size Determine the maximum and minimum values Settings OK.

5. The partition where the virtual memory (page file) is stored must have enough space, and the hard disk resources are insufficient, resulting in insufficient virtual memory.

As we all know, Windows Task Manager shows the details of the programs and processes running on the computer, and we can view or close some processes through the task manager. Recently, many users have found that a large number of duplicate processes suddenly appear in the task manager, and these duplicate processes will waste the CPU of the computer, so most users choose to turn it off. However, many novices don't know how to operate, so let's introduce you to the detailed operation steps below.

Recommended:Zhongguancun win7 system。

Method 1:

1. First click the win7 system start menu, then find the attachment in all programs, command prompt and right-click, and then run as administrator;

2. In the command prompt window, type **taskkill f and press enter;

3. After the above operations are completed, the duplicate IE process in Task Manager will be closed.

Method 2:

1. Right-click in the blank space of the WIN7 system desktop and select New-Shortcut;

3. After completion, a shortcut will appear on the desktop, and if you need to close the duplicate IE process quietly, you can directly double-click this shortcut to close all the duplicate processes with one click.

The method of shutting down the running program in large batches to expand the CPU memory of the Windows 7 system is introduced here, and sometimes it can be very troublesome to delete them one by one. Follow the above two methods to delete in batches, a simple and practical small method.

1. It is recommended that you restart the system to see if it still occupies so high.

2. If there is an error in the program, it should be that when completing the exit task, there is a command that cannot be completed, so it has been repeated, resulting in super high.

3. Too many startup items will also lead to high CPU usage, in addition to anti-virus software, input methods can prohibit boot start-up, and there are unnecessary services and scheduled tasks (open computer manager - computer acceleration - optimize startup project).

4. You're using high-usage software. The best way to do this is to replace it with other software with similar low-usage software.

5. If you install too many beta drivers on your computer, especially the graphics card driver, it is best to choose a Microsoft certified or officially released driver to install it.

6、Security software runs according to (or multiple security software,Grab all kinds of resources),It is recommended that you try Tencent Computer Manager,Free professional security software,Anti-virus management two-in-one,Small memory,Good anti-virus,Good protection,No false alarms and false kills。 You can also upgrade PC Manager to the latest version. The new version has specially strengthened the resource occupation, and the resource occupation is extremely low.

7. There are virus Trojans, which occupy resources, so let's kill them. If you encounter a stubborn Trojan, you can enter the safe mode to kill the virus, you can use Tencent PC Manager Toolbox - Stubborn Trojan Killer (strong killing), or you can try file shredding.

As far as programming is concerned, it takes up space in different areas of memory. For example, the program file occupies a piece at runtime, and this size is relatively fixed. In some cases, the program only allocates space from memory when it is working, and returns it to memory when it is used up.

When users frequently ask programs to perform these kinds of operations, it naturally becomes a large memory consumption. In summary, the amount of memory used by a program is a dynamic process that depends on how the user interacts with the program.

If a large amount of memory is occupied for a long time and cannot be released, it is necessary to consider whether the user's operation is not standardized, or the program design is unreasonable.

Another terrible situation is the memory leak, that is, the program must not release the memory after it has occupied, which is caused by the negligence of the programmer and is a serious problem that must be checked and corrected in the development of the program.

The situation that you're adding is very specific, and it depends on what the program is and how well your machine is performing.

Your GPU cache of 500M is not too large, and if it is a large online game, it is likely to be caused by the memory occupied by the GPU.

Some software in the mobile phone starts automatically, and some software needs to be installed to restrict the software that is not commonly used by the system. Of course, it is not recommended to flash the machine, if the brush is successful, you can unload the unnecessary programs that come with the system.

Ways to make your computer system faster. (Adding a memory module or reinstalling the system can also solve the problem of a slow computer, and can also make the computer faster.) Refer to the information on the system to reinstall the ghost base.

1.Computer boot startup items, optimized. Turn on 360 Security Guard - Boot Acceleration.

2.Usually use tools such as 360 Security Guard to clean up system junk and temporary files (IE cache) generated by surfing the Internet, and check and kill malware.

3.Try to set the IP address to a static IP address to reduce the boot time of the computer.

4.Don't put too many files and icons on the computer desktop, which will slow down the computer's response, and try not to install the software on the C drive. There are too many C disks, and you can also use 360 software housekeeper - toolbox - software to move and solve it.

5.Close some startup programs. Start-Run-Enter msconfig-OK-Click "Start" - Start in the "System Configuration Utility" window, in addition to entering CTFMON and anti-virus software, the general program segment mill can be turned off.

360 Software Manager - Computer Acceleration, Intelligent Optimization Boot Acceleration.

6.It is recommended to install only one main antivirus software, as installing multiple will take up computer resources and make the computer slower.

7.Regularly defragment the disk, open my computer to defragment the disk - Properties - Tools - select the defragmented disk to grind the "Disk Defragmenter" window - analyze - defragment - the system will start to defragment.

8.On a regular basis, clean up the dust in your computer.

9.Regularly clean and optimize your computer.

10.The computer hard disk is used for a long time, it will also make the computer slower, repartitioning and installing can fix the logic is bad, the computer will be faster, and the physical read and write speed of the hard disk is slow, and it can only be changed to a better point! The memory module can also be erased down to prevent oxidation.