ZTE N918ST can t restart

You can flash the phone, first of all, on the Internet** with your phone model matching the ROM package, first, to enter the card swipe mode, that is, the recovery interface, to shut down first, press the volume on + home button + power on until the recovery interface appears. (Operation: Volume up and down is selective, Power button is OK, left button is down, right button is back, home button is up.)

ps: The operation mode is slightly different depending on the version).

If you can't press and hold the "volume up button" + "home" + "power button" to enter the cmw, it means that the cwm kernel of your self-made recovery above has not been flashed correctly, and you must use odin to flash in first.

Then, before flashing, you have to double wipe, which is actually to empty the data, cache, and return to the exit mode. If you don't, you will have an unnecessary failure.

Then, it's time to start the legendary flash!

Select the fifth item "install zip from sdcard";

Then select the first item "choose zip from sdcard", and find your flash package, that is, the "zip" format file.

If you put the ROM package in the external SD card, it is in the extenal-SD folder In addition, if "choose zip from sdcard" does not respond, you can choose the fifth item "choose zip from internal sdcard", here the version of lz is too old so there is no option, but the new version is there, please rest assured).

5The whole flashing process is about 3 5 minutes, after brushing, select the bottom "go back" to return to the main interface and then select the first item "reboot system now" to restart the phone, the first boot time will be a little longer, everyone wait patiently on the line (it really doesn't work to break the electric board to force shutdown and then turn on, lz often do this, rest assured that the phone can withstand such a toss), to enter the desktop is to indicate that the flashing is successful!

Hello !

According to your description, the ZTE N958ST phone can't be turned on, and the boot interface can't be entered.

It is recommended to try restarting your phone first.

If the problem persists, we recommend that you try the following steps:

When the device is fully charged, after backing up data, press and hold the [Power Button] and [Volume +] buttons for 10 seconds with the device off (off).

After entering recovery mode, move the cursor with [Volume+], Volume-] (see figure below).

Operate 2-wipes again

Select Wipe Data Factory Reset > yes, home] to confirm.

Select wipe cache partition > yes , home] to confirm.

Select reboot system now > yes , home] to confirm.

After doing this, reboot completes the repair of the system.

Hope this helps you!!

This needs to be flashed.,I don't know how to add me.。

ZTE Red Bull v5 root tutorial also to share,This root tutorial is also the use of third-party root software to operate,It is equivalent to one-click root,I saw some card brush root methods before,I feel that the operation is a bit much,Many people don't want to get it,Now everyone likes the operation of one-click root,I don't like too cumbersome operation,The operation mode shared here today is also more suitable for novices,If your phone has not been rooted, Let's take a look at the specific operation steps:

The first root method: (the latest method at the moment).

1. Preparation before rooting:

3: Because it is a card swipe, so the mobile phone must first be flashed into the third-party recovery, if your mobile phone has not been flashed into the third-party recovery, click here to view the detailed tutorial of flashing recovery

Two: Start flashing the root package:

1: First unzip the root package in the above ** good RAR format on the computer, as shown below, and then find the zip file [v5] in the folder that is unzipped out, and then copy the [v5] package in zip format to the root directory of the SD card of the mobile phone.

2: Then the phone is turned off and enters the brushed recovery (how to enter: the phone is turned off and press and hold the volume up button + power button of the phone at the same time (press the two keys together), until the boot logo appears Three seconds later, release the hand to enter the recovery).

3: Enter the main interface of Recovery, press the volume button to select [Install Zip Flash Package] and then select [Read Flash Package from SDCARD], then find the ZIP format that you just copied to the root directory of your phone's SD card, press the power button to confirm, and then select [Yes - Install V5], press the power button to confirm.

4: Wait for the flashing to be completed, return to the main interface of recovery, and finally select the first item [Restart Phone].

1. The mobile phone is poisoned, and any situation can occur after the mobile phone is poisoned.

2. Problems with the memory inside the phone.

3. Problems with mobile phone hardware.

Tools Raw Materials; ZTE N918ST mobile phone, mobile phone manager, flashing master.

the solution;

1.When the mobile phone is poisoned, due to the inability to boot stably, only the number of software files on the computer can be used to flash the machine [flash the time of the time, you can back up the things in the mobile phone to the computer], after flashing, install a software that can prevent viruses, such as Tencent Mobile Manager, Kaspersky, etc., you can prevent the virus of the mobile phone, and you can remind in advance when you use other things to help flash the phone package poisoning.

2. The problem of mobile phone memory, this can be considered in two aspects;

1] The storage memory of the mobile phone is insufficient, this situation is caused by too much software installed in the mobile phone, and the mobile phone cannot be operated due to the storage of many things in the mobile phone, and you can delete the unused software and games.

2] The running memory of the mobile phone is insufficient, this situation is that there is more software for mobile games, only less software can be run, not the main software does not run to save the game memory of the mobile phone, and there is a lot of cache garbage that will also occupy the running memory of the mobile phone when the first line of the Internet is often used, you can use Tencent Mobile Manager, Kaspersky and other security software to optimize the memory of the mobile phone with one click.

3. The hardware problem in the mobile phone, this problem is best not to come out, it is recommended to return the data in the backup data to the factory for repair.

Generally, the mobile phone cannot be turned on for the following reasons, which can be self-checked.

1) Check whether there is a virus on your phone.

If the phone suddenly fails to turn on, it is likely that it is a virus. You can use the mobile phone security guard to scan and disinfect the mobile phone first, and clean it up.

2) Uninstall some unnecessary software.

If there are too many mobile phone installers and too many software running at the same time, it is easy to fail to operate, resulting in the phenomenon of failure to turn on.

Line brush treasure is an Android smart line brush tool, supporting most of the Android mobile phone brands and models on the market,。 The line brush treasure is not only easy to use, but also provides a large number of flashing packages** and a complete flashing tutorial, one-stop service allows you to easily solve the problem that the mobile phone cannot be turned on!

So how do you do it?

1. **Line brushing. 2. **Mobile phone flashing package 3, follow the flashing tutorial step by step, easy to flash! In this way, even if your phone can't turn on, or if you fail to flash, you can easily get it!

Let's talk about the overall operation idea first: if your mobile phone can enter the system, you can put the ROM upgrade package into the root directory of the memory card that comes with the SD of the mobile phone through the data cable or WiFi, and then enter the recovery to flash in. The other is that if your mobile phone can't enter the system, you can't connect the computer with a data cable, you have to prepare another memory card, you can only put the ROM upgrade package on the external memory card, and then insert the memory card back into the phone, and then enter the recovery to flash it.

Start operation: 1: If your mobile phone can not enter the system normally, prepare an SD card with a capacity of more than 1G, it is recommended to use Sandisk, Kingstone, or KingMax, if you can enter the system normally, you can not prepare.

2: Use a computer to format the SD card (it is recommended not to choose quick formatting, format it according to the normal program, you can skip it).

4: Then copy it to the root directory of the SD card, if you use a data cable to connect to the computer, you can directly put it into the root directory of the SD card of the mobile phone through the data cable. (Note: It must be the root directory, otherwise it cannot be flashed).

5: When the phone is turned off, insert the SD card, and press and hold the volume up button + power on button at the same time to not let go, and the phone will enter recovery mode after a while.

6: Then press the volume up and down keys to move, move to "apply update from sdcard", if you don't have this item in your recovery, then select "apply update from external storage", press the boot key to enter the stupid infiltration line to confirm.

7: Then select the old file in the list that appears, and then press the power button to confirm, and then start flashing.

8: After about 1 to 2 minutes, the upgrade will be completed, and the phone will automatically restart.