The billiard hall with a bay of 100 square meters has 16 balls and four or five tables

I just talked to a graduate who is in a similar situation to you yesterday.

Advice for you:

Table: 3000 yuan table * 5 = 15000, you can buy new non-brand, you can also buy second-hand newer brand.

Decoration: 500 yuan for the bar, 3,000 yuan for sofas, chairs and coffee tables, 1,500 yuan for electric fans and other others, a total of 5,000 yuan.

Rent:? Total: 20,000 cash + rent, rent can be negotiated to see how to pay, generally annual payment, you talk more about your difficulties, and the landlord has a good relationship, it is estimated that there is a chance to pay half a year or quarterly. In this case, the total one-time investment will be about 30,000 yuan.

Cost recovery typically takes one year.

Yesterday, my friend was also at school, but there were no competitors around, and I estimated that he would earn an average of about 300 yuan a day for 6 desks.

Table: 10,000 20,000 (five ordinary sheets).

Decoration: 100 from a few hundred to a few thousand (ordinary).

Plus the others will not exceed 100,000.

15,000 yuan is enough to talk about in detail.

Twenty or thirty thousand at most!

I wish you a speedy fortune

1000-2000 as you say.

Billiard table. The quality will not be good, it will be good to last for half a year, and it will charge 8 yuan an hour, that is, fooling yourself is fooling customers, you still have to investigate other oak ball rooms, what are they using.

Table. What environment, what service rotation. Go next to the pepper to learn about the quality, cost performance and after-sales service of various brands of billiard tables, and then position it, or I'm worried that your first business will fail!

A billiard table is about 5 square meters, and 40 sheets can be placed in 200 square meters without considering the remaining space. If you consider that it can be used normally, it is more appropriate to put a billiard table in 10 square meters, so that 200 square meters can put 20 sheets.

Billiard table precautions.

Factors that affect the levelness of the countertop.

Adjust the level by yourself and change the initial state.

Move the billiard table on your own and place four billiard balls at the four corners to correct them.

Factors influencing the levelness of the slate.

Stepping on and sitting on the slate causes the deformation of the slate.

When playing a jump ball, the slate is hit with a small pit, and the ball path changes line.

Disassemble and assemble the billiard table by yourself, so that the joints of the stone slabs are uneven, and the direction of travel of the ball in motion is changed.

Factors influencing the edge of the library.

A hard object slammed into the edge of the warehouse.

The rubber strip deteriorates and hardens when exposed to high temperature or for a long time.

The tweed is broken, changing the angle of the ball.

Sitting and pressing down on the small helper will cause the perpendicularity between the gang and the table to change.

The ball bag bursts the rod and hits the ball, and the ** force acts directly on the chamfer of the slate at the mouth of the bag, and there is a knife-like crack on the table.

When the ball is hit, the skin of the bag mouth is damaged, and the ball is damaged when it hits the copper mouth directly.

Excessive use of the blast rod, its impact force hits the front end of the slide, and the nut is loose and the ball is left and leaked.

Bags and slide nuts should be inspected regularly.

Slate bowling method.

The slate bowling method is one of the simplest, practical and intuitive ways to test the quality of high-end billiard tables (slate flatness).

The specific content is: on the slate of the billiard table without tweed, gently push the center point of the cue ball, so that the ball is slow on the slate (less than rolling along the straight line of the test, if the line does not change, it proves that the flatness of the table is qualified.

200 squares; up to 10 pool tables; Friends upstairs; What to say 15-20 pcs; billiard room, a billiard table; At least 20 squares should be placed in one; Fight like this; Customers feel good; I don't know how you put it; If you open a billiard table room; You can contact the manufacturer; Let them design you 'Longxiang Billiards Table Factory; There are free designers.

First of all, don't t know the length of your house L 5 width, if it is the kind of platform Y on the side of the road, the specifications are: 260x285cm = square 2, if you want to play ball, you need to add a meter of club space on the four sides, then X a l U platform I will need 30 L square 4 or so space, if the space can be 8, it is estimated that 5 full calculation R is the most 0 tables, if it is a long 0 square 8 shape point is 2 sheets of loose space.

n v i float c xu u i float e e

This is not necessarily, you better give the length and width, I can give you an accurate calculation, if the placement is reasonable, and the use of the house is also reasonable, you can put more than 20, or even 25.

The approximate size required to set up a pool table.

Taking the most used Chinese billiards in China as an example, the table has two sizes, inner diameter and outer diameter, when considering the floor area, it is necessary to judge according to the outer diameter of the table, and the outer diameter of the table of Chinese billiards is that the left and right space can be reserved around the edge of the table library, so that it will not affect the swing action when playing, and will not produce too much space waste.

Billiard table purchase precautions

1. Appearance: It is necessary to pay attention to the fine workmanship of the high-end table, horizontal and vertical, and the joint parts are tightly seamless; The paint is smooth as a mirror, and the feel is smooth and delicate. In addition, hit the edge of the library with a little force with your waist to see if the ball placed on the table is shaking.

The less shaking, the better. The platform that can't be knocked shows that the wood used is hard and well-made. The low-quality table is rough in workmanship and dull in paint, giving it an uncomfortable feeling.

2. Paint film: Look at the paint surface smashed by the ball is a deep pit, or a shallow point that turns white, if it is a shallow point, it means that the hardness of the wood on the surface is high, and the paint film thickness and hardness of the fully enclosed paint spring modification are good.

3. Warehouse edge: It should be noted that the library edge is a rubber strip wrapped with tweed, and the contact part between the library edge and the table surface has no gap, and the library edge is generally in the middle drum or upturned on both sides when it is deformed. If the gap is small and you can't see clearly, you can try to insert the card to the bottom of the library edge, and it is better to insert it if it can't be inserted.

The above content refers to Encyclopedia - Billiard Table.

A pool table needs about 26 square meters。The standard size billiard table is 1520x2810mm, and at least 150mm or more of the rod space should be left on each side of the perimeter, so the space needs to be meters wide and meters long.

Precautions for buying a billiard table

The main body, that is, the frame, is generally made of hard wood, especially the small states on the four sides of the table, and high-quality hardwoods, such as teak and oak.

It is better to press the wood, etc., and the quality of the main body directly affects the stability of the billiard table, so when buying, you must understand it clearly.

The countertop, currently the most commonly used is cyan slate, it is also the only stone slab officially designated by the global billiards organization, which is called bluestone or inkstone in China, and China's origin is in Jiangxi, which is polished by the machine, and the flatness requirements are very high. The flatness of the slate is also extremely important, and the error is required to be within the limit.

Taiwan is also called tablecloth, it can be touched by hand to feel the quality of the table, the method is to use the palm of the hand to the direction of the top library to stroke, such as touching the feeling of the Song Bureau Hu Chizi is mostly imported Taiwan, and to the direction of the bottom library to touch, the more noisy the feel is only delicate, smooth, the smoother the better, this is also the main way to identify high-end and mid-range imported Taiwan, domestic Taiwan.

The area required to place a table of billiards is about 26 square meters. The size of the standard Chinese billiard table is meters, and in addition, the outer diameter of the Chinese eight-ball table is.

Summary. 180 square meters can put several billiard tables: 8 12 sheets.

A billiard table occupies an area of about 5 6 square meters, plus the event space, generally requires an area of 15 20 square meters.

So 180 square meters can put 8 12 pool tables.

If you consider the pillars, walls, etc., there are about 7 or 10 pool tables.

180 square meters can put a few billiard tables.

180 square meters can put a few billiard tables: 8 12 sheets. A billiard table covers an area of about 5 6 square meters, plus the event space, which generally requires an area of 15 20 square meters.

So 180 square meters can put 8 12 pool tables. If you consider the pillars, walls, etc., the large infiltration base can put about 7 10 billiard tables.

180 sq. m.

Wait a minute.

Square and square meters are the same concept.