What s the matter with Master Lu cleaning up the white screen of the computer

The computer starts up slowly, often crashes, and runs slowly, which is basically caused by a variety of reasons. 1.There is dust inside the case.

can cause your computer to become slower and slower. The landlord can open the case to clean up the dust. 2.

System issues. After a long period of use, the system will produce some redundant files, patch fragments, and some temporary files, the presence of which will affect the processing speed of the computer, causing the computer to become slower and slower. It is recommended that the landlord do regular defragmentation and clean up redundant files with Optimizer or Super Rabbit.

This can effectively improve the speed of your computer. 3.Hardware reasons.

It may be that when the landlord is playing a game or using any software, the game or software has high requirements for the configuration of the machine itself. The computer configuration does not keep up with the software requirements, which can also show that the computer is running slowly. This requires the landlord to invest some money to upgrade the hardware of the machine to improve.

1. Virus, Trojan, rogue software (anti-virus in safe mode), 4. There are too many startup items (including system services), and some unnecessary startup items are deleted with optimization software. 5. Press Ctrl+Alt+Delete to bring up the task manager, and close the process that stops responding or occupies a lot of memory. Or a process with high CPU usage (not system

idleprocess, its numerical value represents the remaining CPU usage) 6 memory is too small, it is recommended to replace the large memory or increase the virtual memory 7 Find an optimization software, for example, Almighty Assistant, Windows Optimization Master, optimize the system Good luck friends!

Is it an IE white screen or a computer white screen? Yes, IE white screen is Master Lu's setting, using a blank page. This prevents Trojans.

Hoohoo restart your computer.

Some system garbage can't be removed, it can only be deleted manually, it can't be said that there is no garbage after cleaning, in fact, there must be some more, but it's a lot less, but be careful with manual deletion, be careful with system files.

System junk is not completely cleaned up because garbage is constantly generated.

You don't need to clean it thoroughly, as long as you can free up memory space, and you can do it regularly.

Because there are also some system junks that are not deeply cleaned: such as ** cache, movie cache, etc.

Just check the unwanted cache garbage in the Deep Cleanup option the next time you detect garbage.

As long as the computer is turned on and running, log files will be generated, and when you open the browser, you will generate caches, and using any kind of software will also produce logs and caches, etc., which are normal phenomena and do not need to be cleaned up every day.

If you often watch movies and television dramas, the cached files will be relatively large, and some even reach several G. Nowadays, hard disks are generally relatively large, and they can be cleaned once a week, and there is no need to clean them every day.

Because you set up the PC to restart after the cleanup is complete. It's not about opening **. If you don't want your computer to restart, just remove the tick before the computer restarts after the cleanup.

There is a fan problem, others don't talk nonsense, don't you see that the speed of the fan is very stable, this is the CPU's own problem, AMD's U is like this, don't be nervous, generally AMD's U is normal at seventy or eighty degrees.

Master Lu is a "professional computer performance testing software"??

Don't make a joke about the landlord, rookies use this entertainment software, which master do you see using it to make evaluations?

The data measured by Master Lu Huzhao is all entertaining

My CPU turned off at 80 degrees, and it was really hot. After dismantling, it was found that the exhaust outlet of the cooling fan was blocked with a bunch of cotton wool, and it returned to about 60 degrees after being removed. FYI. If you don't dismantle the book, you can find a leather tiger to blow the exhaust vent of the CPU and try it.

This is normal, this is because any operation you make on the computer every day will be backed up in the C drive, causing the C drive to run slower and larger as it gets bigger and bigger, followed by poisoning, malicious plug-in tampering programs, system or software patches and updates, and the unstable operation of the pirated system and other factors (small advice: don't use 360 and Master Lu, I have been using the soft media Rubik's Cube recently, I feel very easy to use, and it is also very fun).

You can try other antivirus software, 360 is originally card, I recommend using Kingsoft Guardian and Master Lu better.

There is a lot of junk software, so it will naturally slow down My computer used to be 25 seconds and now it is 31 seconds.

Too many start-ups, too many things? It doesn't matter.

How to deal with the white screen of the computer:

1. First disassemble the shell of the LCD display, and then check whether the screen cable interface is loose or not connected. After checking, the screen cable is connected normally.

2. Then turn on the power switch of the laptop, and then use a multimeter to measure whether the power supply voltage of the screen cable interface is normal. If the supply voltage is normal, go to step 5; If it is not normal, then check whether the fuse resistor or fuse inductor near the output of the screen cable is open or damaged. If it is damaged, the damaged component can be replaced.

3. If the fuse resistor or fuse inductance near the output end of the screen cable is normal, then check whether the output voltage of the DC-DC voltage conversion circuit supplying power to the LCD LCD screen is normal. If the output voltage is abnormal, check the fuse resistor, PWM controller, switch tube, inductance coil, filter capacitor and other components in this power supply circuit, and then replace the damaged components.

4. If the voltage at the output end of the DC-DC voltage conversion circuit is normal, there are damaged capacitors and other components between the output end of the DC-DC voltage conversion circuit and the screen cable interface, and the damaged components can be checked and replaced.

5. If the power supply voltage of the screen cable interface is normal, then check whether the timing signal and driving signal in the LCD panel drive circuit are normal. If it is abnormal, check the output signal, input signal and power supply voltage of the chip that generates this signal respectively to determine whether the driver chip is damaged. If it is damaged, it can be replaced.

The maintenance of the white screen of the display screen is not as easy as the black screen of the display screen, and it is necessary to master some knowledge of the circuit of the display screen, and it is best to ask professional display maintenance personnel to overhaul it.

The cable from the display driver board to the display screen is oxidized and the contact is poor. The screen power supply circuit is not in good contact.

Answer: "Take Dell G5, Win10 system as an example: 1. The white screen of the computer may be caused by poor heat dissipation, you can dust and oil the fan in the case, or replace the fan, or you can add an extra temporary fan to assist in heat dissipation. 2. Check whether the screen cable interface connected to the computer screen is loose or not connected, if so, reconnect it to repair.

3. Check whether there is too much dust in the chassis, clean the chassis in time, and plug in all the cables tightly.

Ask what to do in this way.

Answer 1: The white screen of the computer may be caused by poor heat dissipation, you can dust and oil the fan in the case, or replace the fan, or you can add an extra temporary fan to assist in heat dissipation. 2. Check whether the screen cable interface connected to the computer screen is loose or not connected, if so, reconnect it to repair. 3. Check whether there is too much dust in the chassis, clean the chassis in time, and plug in all the cables tightly.

If the question is not right, tell me how to do it.

Answer: You can dust and oil the fan in the case, or replace the fan, or you can add an extra temporary fan to assist in heat dissipation. 2. Check whether the screen cable interface connected to the computer screen is loose or not connected, if so, reconnect it to repair. 3. Check whether there is too much dust in the chassis, clean the chassis in time, and plug in all the cables tightly.

Hello dear, isn't that the way?

It's useless to ask questions. I need a computer to ask now.

1. First of all, in the lower taskbar, click the right mouse button, find "Task Manager" in the pop-up function, and click Task Manager to enter the interface;

2. Then you can also press and hold the three keys of "Ctrl Alt Delete" on the keyboard at the same time, and find the "Task Manager" in the pop-up interface;

3. Next, enter the manager interface, find "Process" in the upper function column, and click "Process" to enter the interface;

4. Finally, in the process interface, find the application that does not respond, click the application, and then click "End Task" at the bottom right of the interface.

You're trying this.

You can cancel the option to clean up and shut down in the settings.

You set it up in Master Lu.

You set it up to automatically shut down after cleaning, and you have to ask others, you have no brains.

This is just a bug on Master Lu's software, this kind of software can only be referenced, and if you can't trust it, you can use other software to test it.

Brother, in fact, there is no problem with this, you can rest assured that you continue to use it, you use the driver wizard to detect the same as showing that you bought a new one, I can only say congratulations to you that you have found a bug of Master Lu, you can go and notify their company.

Uninstall Master Lu and try it again.