What s the matter with the induction cooker electronic ignition not working

The induction cooker should not be lit with electricity.

Most of the induction cooker buttons use a micro micro switch, long-term use will occur failure, replace the damaged switch on it, do it yourself, a few yuan to get it.

<><1. What should I do if the induction cooker can't catch fire?

1. The pot used is incorrect

Induction cooker needs to be equipped with special pots, if the pots used do not meet the requirements, it will cause the induction cooker to not be able to heat, in this case, we only need to replace the pots and pans with special pots and pans for induction cookers, such as flat bottom iron pots, and the induction cooker can be restored to normal.

2. The sensor is open or short-circuited

The induction cooker sensor has an open circuit or a short circuit, resulting in the induction cooker being in a closed state, no matter which button is pressed, it is useless, and the induction cooker will show the fault, in this case, you need to know the meaning of the fault first, and then carry out targeted repairs, and should directly let professionals be responsible for maintenance.

3. Induction cooker IGBT overcurrent protection

In the case that the current of the induction cooker is too strong, it will cause the overcurrent protection device to be automatically turned on, causing the induction cooker to stop working, in this case, you can wait for a period of time, wait for the current to return to normal, and then turn on the induction cooker again, you can use it normally.

4. The voltage of the induction cooker is too high

In the case of too high voltage of the induction cooker, the IGBT tube overpressure protection will be turned on, resulting in the induction cooker being unable to heat the source of the induction cooker, in this case, the use of the induction cooker needs to be suspended, wait for a period of time, before continuing to use, and pay attention to the voltage of the induction cooker when using, so as not to turn on the IGBT tube overpressure protection again.

2. Respect for the use of induction cooker

1. In the process of use, the induction cooker heats food by induction, so you can not put electronic products on the induction cooker when using, otherwise it will cause electronic products to burn or even **. In addition, you should not put metal substances on the induction cooker, as this can easily cause a fire.

2. If the induction cooker has not been used for a long time, it needs to be inspected before use, and the surface should be wiped, in addition, it is also necessary to check whether the power supply is damaged, so as to facilitate timely maintenance. When using an induction cooker, it is also necessary to place it on a flat table to avoid sliding out of the table due to vibration during use, which may cause danger.

Brand model: Supor induction cooker.

System: C22-IJ59E

If the induction cooker does not catch fire, the first thing to consider is whether it is a circuit problem. When there are too many household appliances, the circuit load is large, the voltage is unstable, or the circuit has a short circuit problem, resulting in the induction cooker cannot start normally. At this time, it is necessary to ensure that the voltage is higher than the voltage of the induction cooker to reduce the load on household appliances.

There are also problems such as poor contact, induction cooker switch, induction cooker hot plate burnout, and aging of induction cooker. It is common for the induction cooker to be unable to properly start the confessional hall.

1. Circuit problems. If the induction cooker can't be started, the first thing to consider is whether it is a circuit problem. When there are too many household appliances, the circuit will be loaded, the voltage will be unstable, or the circuit will have a short circuit, which will cause the induction cooker to not start normally.

In this case, it is necessary to ensure that the voltage is higher than that of the induction cooker to reduce the load of household appliances.

2. Poor contact. The plug-in head of the induction cooker is in poor contact with the power socket, resulting in frequent power failures, which will affect the induction cooker and cannot be started; The plug-in head of the induction cooker is disconnected from the induction cooker body, and the circuit failure will also occur if the contact is not tight, which will then cause the problem that the induction cooker does not work. In this case, you just need to double-check the power supply or re-strengthen the plug-in cable.

3. Induction cooker switch problem. The switch of the induction cooker is the first step to start the Nianyin induction cooker, when the switch of the induction cooker loses its efficiency, the induction cooker can not start normally. Therefore, a broken switch button is also a big reason.

At this time, you need to go to a professional maintenance office to replace the new switch button.

4. The induction cooker inlet water burns out the heating plate. Due to improper use of water inside the induction cooker, it will wet the heating plate and cause a certain degree of damage, once the heating plate is damaged, the induction cooker will not work when it is opened, and it will not be able to start smoothly. In addition, improper cleaning of induction cooktops can also cause water ingress, causing the same result.

Therefore, it is necessary to pay attention when using it and try to avoid the occurrence of water accidents.

5. Induction cooker aging. Long-term use of the induction cooker will cause wear and tear of internal parts, and some functions will be lost or completely lost, and it will not start normally at this time. When the induction cooker is not used for too long, the internal parts will also be corroded and rusted due to moisture, and the induction cooker will basically not be used, and there will be a phenomenon of not starting.