Can the Bandai Gundam model cabin be opened

It depends on what ratio you buy.

There are five grades of bandai's models, which are as follows:

1）.The initial engraving model, the lowest grade, this is a very poor GUNPLA, the scale is 1:144, the production is poor, and the real thing is different, of course, ** is also cheaper.

2）.FG (First Grade) beginner type, this is a model specially made for beginners, all in a 1:144 scale, but the use of PG technology, so the accuracy of the model is much higher than the general grade, easy to assemble, **low, a FG** in the range of 200 700 yen.

3）.HG (high grade) has 1:100 and 1:

144 two, the production is more refined than FG, there are more moving parts, you can perfectly reproduce the body in the animation, the assembly is more complex than the first two, **moderate, but because of the presence of a mainframe in HG, there will be a lot of abnormalities in the body, an ordinary HG's ** between 700 2800, and the price of the mainframe is 5000 28000.

4）.The MG (master grade) is mostly a ratio of 1:100, but there are also very few 1:s

60's, metal parts are added, the detail is super high, the head, chest and other places have internal structures, fingers can move, if it can be perfectly assembled, it must be very beautiful, but **more expensive, mg** generally in 2000 9000.

5）.PG (Perfect Grade) is all 1:60 products, the most perfect GUNPLA, all fingers can be moved, and a luminous device is also added inside, it is the model's eyes that glow, which can open various hatches on the body, leaking out the beautifully made internal machine, and the same use of metal parts to make the model look more realistic, of course, **is also very expensive, PG's** are all 5000 19000!

As a fan of GUNPLA, it is recommended to purchase at least HG or higher. model.

mg, rg, pg, a few hgs can (most of them are old hg), and a few bb (it seems to be just one mk2

Not only can you open it, but you can also sit in it.

Most of the HG can't.,MG PG is basically OK.,I won't lie to you if my model spells less.。

The Fallen Angel Gundam and Wisdom Angel Gundam I bought are 1500 and 1200 yen respectively, and 00+ raiser and Seraphic Gundam don't know. LZ can take a look at the last four digits of the international stripe code on the model packaging, which is the Japanese yen ** of the model. I'm from another province and I don't know your situation, but there are almost non-existent physical stores that are counted as 5, and it is possible to reach the Internet.

Chongwenmen Souxiu has a bandai store, 1 to 144 for 90-100 yuan.

I bought 1 to 100 arios for 165 yuan.

The 00 Gundam is about 230 yuan (RMB), the lifting wing is about 180 yuan, and the airos is about 280 yuan.

Let's take a look at it, just search for it, and the physical store is more expensive than the ** by about 20 more!

If you just look at the manual and put it together, then no one is difficult.

But if you want to fight hard, you can find some ghd to do.

Some of ghd's machines that are very hellish in combination such as God Gundam, because the combination of parts is very poor, so they basically need to cut off the tenon and grind it yourself, trim it, fill the pit, drive the pile, and glue it.

lz, if you really want to toss yourself.

First into a set of air pump and airbrush, and then buy some paint, solvent, offset plate, soil glue stick, if you still want to trouble, such as some etching sheets and other PE

Then find a battlefield-like body such as the EZ-8 Marine Gundam Desert Demon and paint it, modify, stain it, filter it, etc.

If this is not enough, then buy a FG to make your own joints and skeletons.

EX-S MG has more parts than PG, and the relative volume is larger than that of 1:100, because the original setting is larger, about 25cm, and it can't stand up without a bracket.

mg fazz, the number of parts, the highest of all mg, followed by ex-s, sinan also has quite a lot of parts, and manatees.

In fact, it is still recommended that you play MG, the main ** has advantages.

First of all, I recommend EX-S, the screws on the bare skeleton are enough for you for a while, and then there is Sin'an State, and then there is a small piece of hell Unicorn If you want to be perfect, you have to stick the water sticker for at least a whole day, in fact, if you are really rich, it is recommended that you buy a gp03-D of hguc, even if you don't put it together, you can use it for the town.

MG60 MSA-0011(EXT) EX-S Gundam, parts and PG have a fight.

MG's exia, HG's GP03D or simply PG is fine.

Ex-S, Perfect Zeon, Manatee, Heavy ZZ, Red Heresy.

Uh, I always think that it is not difficult to assemble, but the painting is actually more troublesome! If you really want to find trouble, pretend to be a manatee It seems that that one is more troublesome, and there is a pirate x change That color separation is very scary.

Red heresy is more complicated.

Go to Guangzhou to buy Bandai's genuine Gundam, is it better to go to ** than to excited? Cheapest? There is a guarantee of authenticity. How to distinguish if it is not a physical store, the Yue Fu Plaza **, I know that there is a shop called Little Evil Pants Oak Devil on Chunqiao Road Not bad, as for the inspection.

Russia up to 150?? The MG version of Bandai (1:100) has to be at least about 200

If you really want to buy it, you can choose the 1:100 TV version For example, the seed and w series are OK **More than 100 or so But it can only be regarded as an enlarged version of the HG The details are not as good as MG

There is only one of the mg version below 150! It's God Gundam and Touhou Undefeated Gundam! It's worth it!

God Gundam is the only MG that counts as a skeleton! The mobility of the skeleton is comparable to that of PG! If you don't want these two, you can choose the so-called TV version of those series after Seed!

Not before the seed! Just an enlargement of the parts! Boring!

The TV version from SEED onwards can be said to be comparable to MG before 2000! If it's the TV version, I'd recommend the Blue Heresy! But now it's out of MG!

The TV version is boring! But if you offer the best value for money, this is it! mg recommends God!

130 or less,That's only to consider the HG TV version,Only the series after the seed,Although now seed and 00 are the mainstream from the perspective of playability, I personally recommend MG** in 200 to 400 range,Of course, novices still start with HG as well,In fact, the so-called TV version after seed is basically the same,The range of choices is based on a person's taste,In a word,Choose the body you like。

There are also iron balls, the cheapest MG

Iron ball,Jim changed,If you find the ancestor Gundam and red, you can buy three.,But it's basically not built.。。。 It is highly recommended to price between 159 and 165 Tiger B3 and its row, which is only about ten yuan more than your budget.

Go to ** buy, generally about 100 for HG specifications, about 300 for mg, and more than 700 for PG.

The store can find a store with a high praise rate, and generally as long as it is written and sold by Bandai, there will be no fake.

What else can you hi me if there is any question.