I want to learn molds, senior plastic molds, please enter

Your previous contact with the injection mold has little to do with it, but you have previous experience should get started a little faster, plastic molds are generally used 3D software, I don't know how you use UG, but PROE is also possible, UG is more extensive, the function is also relatively powerful, the CAD part is just from the top of the 3D to get out of the following machine or fitter for the need to draw their own 2D drawings, generated from 3D drawings. So when you do design, you have to get a good idea of ug or proe in terms of software! Then there is the mold structure, the structure of the mold is divided according to the difficulty of the mold, the product is complex The mold is also complex, not only will there be the front and rear molds There will also be oblique pumps, inserts and the like, if you want to learn the structure, you must go to the company to do fitter apprenticeship, fitters are engaged in structure, many designs are fitters, I also need to go to the workshop for 3 months to practice in the workshop to learn design in the office.

It can be seen how important the learning of fitters is for design.

In fact, you can do anything, as long as you are not an unpopular, the key is that you have to learn that others can't, or there is a technology to shoot, don't know everything, then anyone can replace you, no competitiveness. I don't know much about the hardware you said, but you should have a plan for yourself in that line, take design as an example, I plan to learn the fitter within 2 years, and practice the software at the same time, and start to look for opportunities to enter the design industry after 2 years, and accumulate experience little by little after entering, the more experience, the more popular. The design is now capped at about 1w per month, and most of the people with a little seniority are about 6000 or so from your classmates' salaries, which is qualified!

No matter how high it is, it can't be more than 1w. Unless you sit on the management, it is estimated that it can be even higher.

Don't look at how much others make and you want to do it, and if you work for two days and feel that it is not as good as you think, it will be bad to change careers, and you will definitely have a big discount in income within two years, you are going to learn. If you think clearly and then do it, don't be hot-headed, you should have a plan for your current work, if the current job has no big achievements in the future or the salary of 5000 will be capped, then go to a higher level, the key is competitiveness, you are competitive, you will have a high salary.

It is recommended that you consider the structural design of electronic products, structural design refers to the creative design by industrial designers, and then the structural engineer will realize it into a product, improve the details of the product, so that it is easier for you to get started, because you understand the software, familiar with sheet metal, there are many products are made of sheet metal shell, so that you can play to your strengths, sheet metal shell of the instrument, the shape will not be too complicated, you should know more about the molding, as long as the internal structure communicates with the software engineer more, there will not be much mistakeIf the company only makes instruments with sheet metal as the shell, the requirements for Pro E are not particularly high, in terms of income, it must be higher than if you are an assistant engineer, if you want to be more promising, you must improve the surface modeling ability of Pro E, and have the opportunity to enter the design company and cooperate with industrial designers to develop products, so that you will have a great improvement on yourself, not only in terms of income, because the design company involves a wide range, and you will have a great improvement in your aesthetic ability after a long time of contact with industrial designers, In this way, you can develop a set of products completely independently, and to put it bluntly, you can take over a private job or something by yourself, and the design cost is absolutely considerable. This is my incomplete description of this profession.

As far as you're now, you're one. Not very interested in molds, two. Mold design is hard work in the apprenticeship stage, much more dirty than your current job, but the income may not be 30% of what it is now.

3.You've been working for four years, isn't it a bit late to learn mold manufacturing and design from scratch now, and it's a waste of your previous four years of accumulation, and your mold level won't necessarily be very high after four years. Think before you decide.

It is advisable to pay attention to the structural design. Good value for money for you haha! And it is not difficult to reach 6000 after tax, and the emphasis on technology is persistence and accumulation.

In the future, the future of the organization is relatively broad, and now the factory labor is more expensive, and many far-sighted factories have begun to engage in automated production lines to replace labor, so the mechanism design is a big cake, a good development direction.

The mold industry is almost saturated, and many people have developed for so many years, and it has reached a stable period.

If you like this industry, I agree with you, plastic molds and stamping dies have a lot in common, but some of the basic theoretical knowledge of plastic molds still have to be learned first, otherwise, even if you go to the plastic mold factory as an apprentice to learn is very difficult, with theoretical knowledge, learning will be very easy. To tell you a key point, to make a plastic mold, you must first understand the structure and realization process of parting and returning!

Other material shrinkage or something!

I expect to give a good review, and I need a good review to do the task!

The professional requirements of plastic mold makers are solid theoretical knowledge and skilled operation skills, which require great patience. Plastic mold makers are an important example. Plastic mold makers must be down-to-earth and do their own thing.

Plastic mold makers usually start as assistant plastic mold makers. Plastic mold makers are very strict with people's spatial imagination. Plastic mold makers belong to the manufacturing industry.

The outlook for the manufacturing sector is not bad. If you're in an industry, you have to work hard. It's easier to succeed.

Most plastic mold factories involve a rotation system, and some even need to work night shifts, which should be selected according to their own physical standards, and the working environment is also a bit insufficient. Because many people are not suitable for night shifts, they can't have all the normal schedules, and they get some diseases. So the standard of work on the night shift is a bit deficient in this working environment, but there is no way.

After all, it's the production line. If you don't produce at night, you will make a lot less money, and so many people in such a large factory have to be supported, so there is no way to have a night shift.

I think it's also a lack of a certain amount of randomness in the operation process, because the production line is full of people, and every position has a stable staff. If you are in a hurry and need someone else to take care of the production line. It's very cumbersome, but fortunately, the wages of the mold makers are very high, as can be seen from the plastic mold factories around our house, most of their salaries are five or six thousand, and other factories in the vicinity only pay three or four thousand, so the salary is not bad.

Because the level of intelligence in this field is very high. Manpower is just auxiliary equipment manufacturing, and there is no heavy labor. Many positions are all sitting, and there is no need to stand all day.

Because sitting down is much more comfortable than standing, and people standing for a long time can easily cause more physical diseases, this situation is difficult to happen in the working environment of the plastic mold factory, because the natural environment is still very pleasant.

Plastic mold manufacturers are mainly engaged in processing molds, and the molds need to be tested and repaired to make the molds meet the standards, because the work of plastic mold manufacturers is mainly to process the molds, and the maintenance and testing can make the molds meet the requirements of the market, as well as meet the safety standards.

This sport is mainly engaged in the design of plastic parts, the design of molds, the manufacture of molds, the repair and maintenance of molds. It is a relatively high-precision machining. This job is more demanding on personnel.

It is mainly used to make plastic molds, which is more dangerous and difficult, and requires a long time to accumulate experience. Because in manufacturing, what kind of work is what you do.

Mainly engaged in the processing of molds, as well as maintenance and testing molds, we must master the basic properties of plastics, and we should also understand the job responsibilities to develop the structural design of molds.

Summary. Hello, learn mold, you can go to learn after graduating from middle school.

Hello, learn mold, you can go to learn after graduating from middle school.

Can a 14 year old go to school?

In middle school, I went to learn to call it a secondary school student.

OK. But wait until you graduate from high school.

I can't do it if I don't graduate.

Height car|Around M4, I didn't graduate from middle school. I didn't go to the second semester of the third year of junior high school. Is this okay?

Hello, you can't do it if you haven't graduated.

Let's see if you can go back to school.

According to the requirements of technical secondary schools, regular and famous technical secondary schools are not allowed to study without a graduation certificate. Specialized secondary schools are usually carried out after the end of the nine-year compulsory education and are equivalent to high school in terms of level, but ordinary high schools focus on the teaching of basic knowledge, and after graduation, they generally take the general college entrance examination to prepare for entering university. The technical secondary school attaches more importance to the training of professional skills, and after graduation, you can directly enter the society and be competent for the corresponding occupation.

Do some factories want that??

The factory does not require academic qualifications.

I suggest that you first look at a certain school, and then call ** to consult that school.

Because there is a shortage of people in secondary schools.

Yuyao. Do you need an academic degree to learn mold over there?

As an apprentice. Do you need an academic qualification?

It's specific to a certain school.

In school, you need to have a high school diploma.

You can ask your educational institution if you can get a junior high school diploma.

Self-examined. That means you can't learn mold without a junior high school diploma?? Nor can you be an apprentice.??

Regular schools cannot.

1. Making a container:

One-piece mold double-spell mold, copying flat objects only needs a one-piece mold, copying three-dimensional objects need double-piece molds.

Please click Enter a description.

2.Measure the length, width and height of the object to determine the size of the container you need.

3.Containers are made based on the measured data. The material is optional, but the edges must be sealed, or the gaps must be filled with clay.

The container should be increased by centimeters in length, width and height of the object.

Cut out the four sides of the container and a square bottom from the foam board.

The panels must be glued with all-purpose glue and must be sealed.

2. Placing objects:

1.The production methods of one-piece molds and double-piece molds are somewhat different.

Clay should be used to make molds.

Twin mold: Spread clay in a container and insert the object vertically. The height of the clay reaches 1 2 points of the object, and the surface layer of clay is smoothed.

2.Follow the instructions to blend the molded rubber. There are many types of plastic mold rubber, and you should understand it before buying.

Latex ** is low and easy to operate, but the demoulding time is very long.

Silicone is durable.

3.Before molding, brush a thin layer of rubber on the surface of the object and carefully fill the gaps on the surface of the object.

4.Pour in the rubber, level with the mouth of the container, and cover the object sufficiently.

5.Follow the instructions to wait for enough time to demold.

3. Take out the mold:

One-piece mold: Break the container and remove the object from the mold. At this point, the mold is ready for use.

2.The other half of making a double mold:

Break open the container and take out the half-clay and half-rubber mold.

Carefully remove the clay, leaving the rubbery part.

Use a knife to carve 3-4 small triangular depressions in the rubber mold to be spliced as a joint with the other half of the mold.

A new container is made from an existing half of a rubber mold, which is twice as tall as the existing mold.

Put in half of the rubber mold, and then put in the object. Make sure that the container fits around the rubber mold.

Apply a layer of release agent to the surface of the half rubber mold to prevent the two mold halves from sticking.

Pour rubber into the container and allow it to solidify and demold. The double-spell mold is ready.